Diameter: 1 mm - 20 mm
Temperature: 200 °C
... SB-SRS-40: Rated ambient temperature: 200℃, rated voltage: 300V SB-SRS-70: Rated ambient temperature: 200℃, rated voltage: 600V Structure It is extruded by silicone rubber, and reinforced with non-alkaline fiberglass braid, then coated ...
Shenzhen Sunbow Insulation Materials MFG. CO., Ltd
Diameter: 12 mm - 103 mm
Temperature: -50 °C - 350 °C
PRWG series is UL listed / recognized for full trade size. The performances of flexibility, pull and impact resistance completely meet with UL1 standard. Wiring protection in/on building, office, light fixture, machines, elevator, data center and etc., ...
Flexible Technology Co,.Ltd
Diameter: 1 mm - 150 mm
Temperature: -55 °C - 125 °C
Length: 15 m - 300 m
... Item : FLEXIBLE/ FLAME RETARDANT, HIGH PERFORMANCE TUBING Features: • Crosslinked polyolefin • Flame retardant • General purpose • High flexibility • Wide range of colors • Operating temp.: -55°C to +125°C • Min. shrink temp.: 70°C • Min, full recoverytemp.: ...
Arihant Panel Fittings Private Limited
Diameter: 9 mm - 160 mm
Temperature: 100 °C
... Characteristics Soft and flexible, anti twist; good mechanical strength, can bear heavy load; acid resistance, cuttings liquid, lubricating oil, coolant and so on; surface gloss, friction resistance; black resistance to ultraviolet light, high mechanical ...
YUEQING HONGXIANG CONNECTOR MANUFACTRER CO., LTD
Temperature: -55 °C - 135 °C
... GREMARK® GMDR 3X is a printable, flame retardant, diesel resistant polyolefin heat shrink tubing in a ladder format. GREMARK® GMDR 3X offers an excellent solution for cable identification and meets the highest requirements in railway, military and industrial ...
GREMTEK
Diameter: 1 mm - 101 mm
Temperature: -55 °C - 125 °C
The PHL marking system is intended only for insulation and not for any printing. The UL approved system with 2:1 shrink ratio features 100°C shrink temperature and 55°C to +125°C working temperatures. They are made of flame retardant cross-linked polyolefin ...
... cold-shrink body supplied assembled onto removable support. The outer protection is performed by adhesive lined heat shrink tube and breakout. The hot-melt adhesive ensures the perfect sealing of the joint. ...
Elcon Megarad Spa
Diameter: 2 mm - 18 mm
Temperature: -40 °C - 200 °C
... Continuous operating temperature: -40°C to 125°C Shrink temperature 125°C up to 200°C VW 60360-3 Anti-twist safe guards Tubular connectors Select a dimension which will shrink snugly over the application to be covered. If recovery ...
DSG-CANUSA GmbH
... People are living longer, the number of elderly people is increasing, and thereby the need for more hospital beds, and especially nursing homes. Duelco has a wide range of exciting products for this interest group. ...
Diameter: 16, 20, 25, 32 mm
Temperature: -5 °C - 60 °C
... GENERAL DESCRIPTION • Rigid • Suitable for light mechanical loads • Made of polyvinyl chloride – (U-PVC) • Self extinguishing; flame retardant APPLICATIONS • Indoor residential and industrial installations • Cable routing through masonry – Flush ...
courbi
Diameter: 25 mm - 92 mm
... XAGA® 550 Copper Closure, unpressurized, heat shrink, 500 mm sheath opening, 92 mm splice bundle diameter Full range of closures to suit all copper cable sizes High performance heat-shrinkable closure for both maintenance and new constructions Suitable ...
Diameter: 25, 20, 16 mm
Temperature: -25 °C - 90 °C
... The spiraled sheath is available in coils of 30 meters and in the sizes of high rotation, Ø16-20-25, also in coils of 10 meters The line FLEX offers a big range of accessories for sheath and pipeline with protection level from IP40 to IP67. Moreover ...
Arnocanali
Temperature: -40 °C - 150 °C
... DESCRIPTION innoSHRINK®_XTFSis a heat shrinking woven protection sleeve made of PET (polyester) warp fibres and shrinking polyolefin weft fibres. APPLICATION AREAS engine compartments servo hoses water hoses air hoses oil hoses hydraulic ...
IPROTEX
Diameter: 2 mm - 45 mm
Temperature: -45 °C - 125 °C
... PE Dual Wall Heat Shrink Tubing Min. shrink temperature: ≥70℃ Min. full recovery temperature: ≥125℃ Working temperature: -45℃-125℃ Melting temperature of inner layer of adhesive: 70-100℃ Shrink ratio: 2:1 Feature: anti-corrosion, waterproof, anti-leakage The ...
Temperature: -40 °C - 130 °C
... Our cellular rubber sheaths have the dual function of providing acoustic and thermal insulation, as well as mechanical protection against wear and impact. Insulating tubes are used in industrial cooling systems (heat pumps) or as grommets in vehicles, ...
Diameter: 49.5 mm - 52.5 mm
Length: 0.3 m - 2.3 m
... construction applications. The Plastic
Sleeve can be cut to the required length and is fitted with a Plastic Plug, then cast into the slab at the required position.
- Product Features
- Plastic Sleeve
Have you bought a stylish roof drainage system in grey, for example, but the ground connection pipe does not match? No problem, we have cladding pipes in all colours and materials available in the system. Use IMR and the groundpipe will not be visible ...
... sharp edges, we recommend to use an edge protector or a edge wear pad GSThe standard design is not sewed on the sling, so the sleeve can be moved along the sling. On request also available sewed on the material of the sling Toughness ...
Diameter: 3.2 mm - 25.4 mm
Temperature: -54 °C - 135 °C
Length: 4'00"
CHO-SHRINK electrically conductive heat shrink tubing is available in two performance options: CHO-SHRINK 1061, coated with silver, designed for higher end military and aerospace applications, and CHO-SHRINK 1120, coated with silver-plated copper, and ...
Ensures the down conductor is physically shielded from knocks at ground level.
Length: 1.5, 3, 1 m
... Insulating sleeve for LV conductor wire Insulates live conductor wire up to 15mm diameter during work on or near the conductor. For overhead networks. Max operating voltage : 1000 V AC. Technical specifications The sleeves ...
... The straight, long shank terminal is used for connecting electrical cables to structures. equipotential bonding bars, or to terminals on electrical equipment. /Technical specifications • Product specificity: Permanent • Product kind: Accessories • ...
Diameter: 0.8 mm - 1.1 mm
... Product overview
Silicone Phaco
Sleeve (also referred to as Silicone I/A tips) designed for use in phacoemulsification cataract procedures to provide controlled irrigation and aspiration. Produced by injection molding in an ...
Diameter: 34 mm - 200 mm
Temperature: -80 °C - 250 °C
Length: 10 m - 10 m
... Available
- 1.5 in — roller Ø 38 mm — sleeve inner Ø 34 mm — wall 2, 2.5, 3, 4 mm
- 2 in — roller Ø 48–50 mm — sleeve inner Ø 47 mm — wall 2, 2.5, 3, 4 mm
- 2.5 in — roller Ø 63–65 mm — sleeve
Diameter: 2 mm - 150 mm
Temperature: -55 °C - 125 °C
ALPHA AUTOMATISMES Sarl
Diameter: 1 mm - 32 mm
Temperature: -70 °C - 260 °C
ALPHA AUTOMATISMES Sarl
Diameter: 25 mm - 420 mm
Temperature: 204 °C
ALPHA AUTOMATISMES Sarl
Diameter: 2 mm - 18 mm
Temperature: 0 °C - 150 °C
... Compression Fittings Type 200 – High resilience due to cutting ring and nut – Cutting rings in line with DIN 3861 – Swivel nuts in line with DIN 3870 – Nickel-plating for corrosion protection Dependent on the temperature range of the tube/pipe ...
the best suppliers