Valves for industrial applications

DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C

... Group 1 • 100% full bore • Gate valves are bi-directional and can be installed in any position. However, the preferred orientation is with the stem pointing vertically upwards. Field of application • Industrial ...

DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 150 °C

... Cast iron (GJL 250) PN 16 gate valve oval body OS&Y stainless steel (AISI 304) trim 150°C (max). Made in Italy. Fields of application: Industrial plants - Sewage Water - Water treatment - Air-conditioning ...

DN: 40 mm - 300 mm
Pressure: 10 bar
Temperature: 150 °C

... Cast iron (GJL 250) PN 10 gate valve flat body OS&y; stainless steel (AISI 304) trim 150°C (max) ...

DN: 10 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 150 °C

... diameter equal to the diameter of the pipe High flow capacity 2. Pneumatic actuator integrated in the valve Space saving (-60%) and reduced costs compared to an automated valve 3. Piston with ...

DN: 2.5 in - 8 in

... Double Block & Blead (DB&B) / Dual-Safe valve optimal design. Casted body for optimized cost affectivity. Incorporates two main isolation valves and one bleed valve in a single body construction. Lowest ...

DN: 0.25 in
Pressure: 0 bar - 200 bar
Temperature: -20 °C - 70 °C

... cylinder pressure. The rossignol valve can not be used for pres- sure control. The metering valve Rossignol will be used for industrial applications as well as ...

... Planning, construction and delivery of high quality valves for power plant and process heat generation. ...

DN: 0.5, 1, 2 in
Pressure: 24, 17.2 bar
Temperature: 121 °C

... thermostatic mixing valves/diverting valves use a thermal actuator to accurately proportion and maintain flow in response to temperature. These 3-way thermostatic valves are used in a variety of industrial, ...

DN: 0.5 in - 4 in
Pressure: 10 bar
Temperature: 150 °C

... traceability Certified materials for Pharmaceutical use Sanitary sampling valves suitable for installation on the tanks or process lines of Pharmaceutical, Food & Beverage, Cosmetics, ...

DN: 3.2 mm - 4.2 mm
Pressure: 100 bar - 400 bar

... Internal Tighteness : Mini 10-3 mbar.l/s en helium ( Valve / Seat) External Tighteness : Mini 10-4 mbar.l/s en helium KV value for a pressure drop / loss ΔP = 1 bar : - Internal diameter Ø 3,2 mm : KV = 0,23 - Internal diameter Ø ...

DN: 5 mm
Pressure: 0.5 bar - 10 bar
Temperature: 5 °C - 75 °C

... cartridge valve with a nominal orifice DN 5 with a mechanical valve actuation. By manual operation, at a push of a button so to speak, the valve opens and closes. The manual actuation enables innovative ...

DN: 3.175 mm
Pressure: 0 bar - 5.2 bar
Temperature: 0 °F - 150 °F

... reliable PTFE needle valves are designed for laboratory and industrial applications for regulating corrosive gases and liquids or for high purity service. They may also be used as shut ...

DN: 1.813 in - 7.063 in
Pressure: 15,000, 10,000 psi

... Cameron frac valves provide three times more uptime compared with other suppliers, minimizing NPT and related costs. Choose the gate valve that best suits your fracturing program Designed as a manual valve ...

... designed for applications found in the oil and gas industry, i.e offshore on an oil platform. The valve is designed to maintain optimal tightness and function even in the event of a fire. This prevents ...

DN: 0.5 in - 12 in
Pressure: 19.7 bar
Temperature: 0 °F - 400 °F

... ball valve provides bubble-tight shutoff at 285 PSI. The one-piece valve is recommended for industrial, petrochemical, utility service applications. It conforms to Fire Safe and Anti-Static ...

DN: 40 mm - 300 mm
Pressure: 6, 10 bar

... Metallic-sealing gate valve with face-to-face length of Basic Series 14 for use in hot-water pipelines. Universal application possibilities thanks to stainless steel seat rings. Suitable for industrial ...

DN: 0.5 mm - 11 mm
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 70 °C

... Materials Body: Al (anodized), seals: NBR This valve is used for the speed control of a pneumatic cylinder. The flow rate can br regulated by turning the adjusting screw. ...

Pressure: 50 bar - 1,200 bar
Flow rate: 50 l/min - 600 l/min

... Dimensions: 321x110x110 mm •Weight: 17.8 kg SPECIFIC FEATURES •Bypass valve •Consumer shut-off valve ...

DN: 16 mm - 110 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C

... 100% factory tested. • Available in PVC-U or Corzan® CPVC. • Threaded seal carrier. • It allows the disassembling of the valve while maintaining system pressure. • Union ends for easy installation and removal. • Good mechanical strength. • ...

DN: 20 mm
Pressure: 0.2 MPa - 0.8 MPa
Temperature: -25 °C - 150 °C

... Working medium - Clean compressed air (GB/T13277-91) - - Voltage - DC24V - AC110V - AC220V Electricity - 0.8A - 0.46A - 0.23A Relative air température <85% Filter Area(M2) 6-8 10-12 20-22 34-36 40-42 42-45 60-65 ...

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 100 °C

... Body material Nickeled Brass Ball material Chromed brass PN (End) PN16 End Flanged Contact sealing PTFE Operating system Lever ...

DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C

... construction according to API 600 and ASME B16.34 , API 598 Test second , size flanges according to ASME B16.5 , EN 1092-1 and ISO 7005 and spacings between flanges according to DIN 3202 , EN 558-1 , ANSI B16.10 , ends ...

DN: 6 mm - 25 mm

... The RF flow control is a check valve made of carbon steel having a square body. It has materials of 1,0737/1,4749. It has an operating pressure of PN 350 and the temperature ranges from -20°C to +100°C depending on the materials selected. ...

DN: 0.25 in
Pressure: 3 bar - 200 bar
Temperature: 10 °C - 50 °C

... flow during metering application. The Pressure regulating valve consists of a basic body and a pressure unit (sealing ball and seat made of hard metal, as well as a high-quality spring assembly). Standard version ...

... Emergency Shutoff Valve Functional Features 1. Applicable to gasoline, kerosene and diesel; 2. When the leakage of the pipeline is greater than or equal to 11.41/min. the side leakage device will control the oil output in time: 3. ...

DN: 0.375, 0.5 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 100 °C

... mechanical PEKI valve series has been manufactured for decades from high-quality hot pressed parts and precision turned parts, which are assembled with modern injection moulded parts and sealing elements from German production. ...

DN: 2 in - 24 in
Pressure: 16 bar - 250 bar

... entry ball valves are used in piping systems where the top of the valve can be removed to gain access to the ball and seats without removing the entire valve from the piping system. Typically made from ...