Valves for industrial applications

Pressure: 25 MPa
Temperature: -40 °C - 80 °C
Flow rate: 220 l/min

... Suitable for small agricultural dump trucks, open hydraulic systems, and single-acting cylinders. It has three functions: lifting, stopping, and lowering. The product is equipped with an adjustable relief valve ...

DN: 1 in - 10 in
Pressure: 0 bar - 420 bar
Temperature: -120 °C - 650 °C

... one device including one upstream valve, one quick action line blind and one downstream valve. The mechanical safety interlock between the Line Blind and the valves prevents any operation of the Line ...

Pressure: 60 bar - 280 bar
Flow rate: 40 l/min

... operation - Application - Suitable for interim installation - Properties - Reduces system pressure - Technical information - Minimum purity of the medium: ISO 4406 19/17/14 (NAS 8) A and B versions with check valve ...

DN: 0.5 in - 6 in
Pressure: 10 MPa - 76 MPa
Temperature: -29 °C - 593 °C

... the valve has small flow résistance and large flow capacity. 3. - Balanced valve core structure. The valve core and sleeve form a pressure-balanced structure with a large ...

DN: 4, 6, 8, 10, 12 mm
Pressure: 1 MPa
Temperature: 0 °C - 60 °C

... m Outer diameter of pipeline Φ 4 incidents When the rotary knob of the 3-way valve is closed, residual gas is discharged from side A (there is no exhaust port in the valve body, and it is discharged ...

... Application: Ideal for industrial applications in chemical processing, water treatment, oil and gas, pharmaceuticals, food and beverage, and petrochemical ...

DN: 15 mm - 300 mm
Pressure: 150, 300 psi

... This Ball Valve is available in sizes that range from 15 MM to 300 MM. Sturdy constructions, long service life, fine finishing are some of the main factors of our 3 & 4 Way Ball Valve. This Ball Valve ...

DN: 6 mm - 25 mm

... These valves are used to open or close oil flow in a circuit even with maximum pressure. Applications: Connect indifferently A or P to the ports where flow has to be blocked. Flow is blocked with lever at 90° (position ...

DN: 1.25 in - 4 in
Temperature: 100 °C

... 3-way high flowrate vacuum valve VACUUM/VACUUM BREAKER valve when used with vacuum pumps DIVERTER VALVE when used with blowers Advantages • Rapid vacuum interception and interruption • Remote ...

Pressure: 17.2 bar

... activate an actuator to open the deluge valve: a pneumatic Dry Pilot detection Line and/or an electric solenoid, connected to sensorst hrough a control panel. Once open, the valve reduces the inlet high ...

DN: 2.5 in - 16 in

... Corporation has introduced their new AWWA C515 Gate Valves. These new gate valves feature three different connection types such as push-on, flange x flange, and mechanical joint. The valves ...

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C

... EFFAST PVC-U valve BK1 is a true union ball valve ideal for heavy duty applications, chemical applications and water treatment. Technical features: Solvent welded ...

Pressure: 0 psi - 220 psi
Temperature: 0 °C - 60 °C

... Inlet NPT : 3/4" Max Pressure : 0-220 PSI Mesh Size : 2.5-3 Outlet NPT : 3/4" Temp. Range : 33-140°F ...

DN: 25 mm - 100 mm

... Sanitary Stainless Steel Three Way Ball Valve Standard: SMS, ISO, DIN Material: SS304 or SS316L Connection: Welded, Clamped, Flanged, Threaded Size: DN25-100, 1"-4" Applications: Effective ...

DN: 10 mm - 300 mm
Pressure: 40 bar
Temperature: -271 °C - -30 °C

... desert or cold conditions) Essential product features: - Available as globe, control or check valve and filter with stem extension - Cryogenic valve suitable for medium temperatures ranging from -271° C to -30° C ...

DN: 15 mm - 300 mm
Pressure: 6 bar - 160 bar
Temperature: -60 °C - 550 °C

... drilled according to EN 1092-1 for body material F •face-to-face dimension according to EN 558 series 1 Bellow sealed stop valves, ends flanged, form straight 215 Grey cast iron EN-GJL-250 A Stem and disc connection - fixed - rolled ...

DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: 200 °C

... tough operating conditions. Applications: Thermal Power Plants, Gas Turbines & Gas Compressor Units, Steelworks, Refineries & Petrochemical Plants, Biogas & Landfill Gas, Pipeline ...

... type of 3 way ball valve, L type and T type. The L-shaped three-way ball valve is used to switch the flow direction of the medium and can connect two channels that are perpendicular to each other. The ...

DN: 15 mm - 800 mm
Pressure: 16 bar - 420 bar
Temperature: -100 °C - 720 °C

... GUIDED SPHERE VALVE METAL SEAT WIDE RANGE The KTN SAT is the best KTN design to solve the widest range of applications. The main goal of this design is its philosophy of achieving the highest security using unmatched ...

DN: 50 mm - 600 mm
Pressure: 6, 8, 3, 4, 10 bar
Temperature: 230, 120, 200, 105 °C

... steel shut-off- valves are not necessary available in various seal types areas of application: one part gate valve for industrial use nominal ...

DN: 50 mm - 200 mm
Pressure: 10 bar

... BUTTERFLY VALVES AISI 316 BODY, DISC AND SHAFT,FLANGES PN10 AND ANSI 150 Butterfly valves type Wafer : - AISI316 body, disc and shaft - PTFE body seat over EPDM backseat - Assembly between flanges PN10 and ANSI150 - ...

... At ARIS, you recei­ve high-qua­li­ty electri­cal and pneu­ma­tic actua­tors and robust indus­tri­al fit­tings. We sup­ply indi­vi­dual pro­ducts for self-assem­bly or repla­ce­ment dri­ves and access­ories. Of cour­se, we also assem­ble ...

DN: 0.5 in - 2 in
Pressure: 10 bar
Temperature: 50 °C - 120 °C

... Industrial float valve with die casted body in Stainless Steel AISI316. Swing clapper shutter with rubber seal (elastomeric type). Full port pass and progressive closure. Suitable for water tank level control and other ...

DN: 655 mm
Pressure: 1.2 bar
Temperature: 50 °C - 120 °C

... with ISO 250 flanges in sizes 10" and can be operated in pneumatic or APC mode. This vacuum valve is usually designed as a gate valve or a pendulum valve, applications ...