DN: 40, 50, 65, 80, 100 mm
Pressure: 16, 10 bar
... The FK is a butterfly valve for shutting off and regulating flow, with structural characteristics that make it ideal for industrial applications requiring high performance and long-term ...
FIP - Formatura Iniezione Polimeri
DN: 125, 150, 200 mm
Pressure: 10 bar
... The FK is a butterfly valve for shutting off and regulating flow, with structural characteristics that make it ideal for industrial applications requiring high performance and long-term ...
FIP - Formatura Iniezione Polimeri
DN: 300, 250 mm
Pressure: 10, 8 bar
... The FK is a butterfly valve for shutting off and regulating flow, with structural characteristics that make it ideal for industrial applications requiring high performance and long-term ...
FIP - Formatura Iniezione Polimeri
DN: 0.375 in
Pressure: -1 bar - 10 bar
Temperature: -20 °C - 84 °C
... Proportional Flow Control Valve consists of PM series driver and FC series proportional flow valve. With an input signal either through analogue or digital, the needle inside the proportional valve moves ...
DN: 2.5 mm
Pressure: 2 bar - 10 bar
Temperature: 0 °C - 60 °C
... Microvalves with plug button 3/2 NO or NC with several actuation options, mechanical or manual. Thanks to the usage of the adaptor all actuators can be mounted on microvalves and it is also possible to combine two microvalves to obtain functions 5/2 ...
DN: 0.375, 0.5, 0.125, 0.25 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
... The stop valve is a pneumatic device that locks the cylinder’s stroke in case of pressure loss in the system. The valves are mounted directly on the cylinder’s supplying ports and do not interfere ...
DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 1 MPa
Temperature: 0 °C - 60 °C
... Flow rate can be set with indicator. Reducing the task of initial flow settings or their maintenance / replacement. The scales are on the side (upper / lower) and the top. Flow rate is proportional to the knob turns. 2 types with different flow range ...
NIHON PISCO CO., Ltd.
DN: 12, 10, 8, 6 mm
Pressure: 0.1 MPa - 0.7 MPa
Temperature: 0 °C - 60 °C
... Large-flow type Speed Controller for driving device. Best suitable for high-speed operation cylinder. Large-Flow type with same size as Speed Controller series. For price options, please contact our distributor near your office. https://www.pisco.co.jp/en/company/network/ ...
NIHON PISCO CO., Ltd.
DN: 1.8 mm - 10 mm
Pressure: 0.1 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C
... Low-flow type Speed Controller for driving device. Best suitable for the fine speed adjustments of low-speed cylinders. Precise control for low speed cylinder. Free flow rates are equivalent to those of standard products. Return strokes can be driven ...
NIHON PISCO CO., Ltd.
DN: 15 mm - 200 mm
Temperature: -20 °C - 140 °C
... diaphragm. Maintenance-free. Main Applications ■ - Food and beverage industry ■ - Industry, building services and power stations ■ - Chemical and process engineering ■ - Service water ■ - Air ■ ...
AWF
DN: 15 mm - 250 mm
Pressure: 10 bar - 100 bar
Temperature: -60 °C - 350 °C
... controller IPC Pneumatic and electro-pneumatic positioner type 8047 - 2-wire - Ex version Positioner with mounting acc. to NAMUR standard Accessories - Metal bellows Limit switch Position feedback Manual ...
Schubert & Salzer Control Systems GmbH
DN: 15 mm - 250 mm
Pressure: 10 bar - 40 bar
Temperature: -60 °C - 350 °C
... - IO-Link - Integrated process controller IPC Pneumatic and electro-pneumatic positioner type 8047 - 2-wire - Ex version Accessories - Metal bellows Limit switch Position feedback Pilot valve . ...
Schubert & Salzer Control Systems GmbH
DN: 15 mm - 125 mm
Pressure: 10 bar - 40 bar
Temperature: -60 °C - 230 °C
... This compact motor valve is used in a wide range of process engineering control tasks. It is particularly characterised by its very short design. Most media such as steam, fluids, gases, etc. can be excellently controlled with it. This ...
Schubert & Salzer Control Systems GmbH
Pressure: 30 psi
Temperature: 32 °F - 180 °F
Flow rate: 8, 0 l/min
... isolation valve like no other... Utilizing the industry's most robust and powerful miniature linear actuator, the patent pending stepper-controlled Eclipse proportional isolation valve leads the industry ...
DN: 8 mm - 25 mm
Pressure: 0 bar - 7 bar
Temperature: -10 °C - 140 °C
... The GEMÜ F40 2/2-way filling valve is designed for filling processes in aseptic and hygienic areas of application. Flow rates up to 6,600 l/h are possible depending on ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 15 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 80 °C
... Diaphragm valve - R690 The GEMÜ R690 2/2-way diaphragm valve has a low maintenance membrane actuator and is pneumatically operated. Normally Closed (NC), Normally Open (NO) and Double Acting (DA) control functions are ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 15 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 80 °C
... The GEMÜ R677 2/2-way diaphragm valve has a low maintenance plastic bonnet and is manually operated. An integral optical position indicator is standard. The High-Flow valve body provides compact dimensions at high flow ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 25, 40 mm
... Customized, high-quality stainless-steel valve assemblies. Specifications Media liquid ...
DN: 12 mm
... Modular and versatile pneumatic valve for manifold assembly. Agriculture Specifications Media Liquid, vapor ...
DN: 50.8, 3, 4 mm
Pressure: 10, 16 bar
Temperature: -10 °C - 140 °C
... Connection Wafer - API 609 (CAT - A) Range - DN40 - DN300 Suitable to - ASMI B16.5 150#, BS10 TABLE : E, F, H Pressure Range - PN10, PN16 Leakage Class - 100% Tightness at fully differential pressure Standard - API ...
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
... PRESSURE REDUCING VALVE The valve reduces high upstream pressure to a pre-set lower and constant downstream pressure level, regardless of fluctuating flow or varying upstream pressure. A hydraulic ...
Tecnidro
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
... ELECTROHYDRAULIC ON/OFF VALVE The valve opens fully or shuts off in response to electric signals. The valve is controlled by a solenoid that allows control liquid to flow in the upper chamber in order ...
Tecnidro
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
... maximum pre-set value. A hydraulic regulating pilot drives the valve. The pilot is able to detect upstream pressure values and regulates closing steps of the valve until the pre-set pressure value is ...
Tecnidro
DN: 20, 25, 15 mm
Pressure: 16 bar
Temperature: -10 °C - 110 °C
... 2 way MM BRASS Diamant ball valve 2-way MM BRASS with caps and tangs ...
Comparato Nello S.r.l.
DN: 32, 40, 50 mm
Pressure: 40 bar
Temperature: -20 °C - 110 °C
... PRO Range motorised valve – 2 way FF BRASS Description ALL-IN-ONE actuator for 3 points without relay or 2 points with relay connection Operating time: 35 - 45 - 55 sec for 90° rotation Protected type, manual emergency override, ...
Comparato Nello S.r.l.
DN: 40, 50, 32 mm
Pressure: 10 bar
Temperature: -15 °C - 50 °C
... microprocessor sends a modulating signal which régulâtes the valve opening and closing. Note: for a proper operation, there should always be a closcd hydraullc circuit ensurlng a flow on the mlxlng valve by means of ...
Comparato Nello S.r.l.
DN: 8 mm - 80 mm
Pressure: 6 bar - 8 bar
Temperature: -20 °C - 85 °C
... 3 PIECES BW BALL VALVE (58192) WITH STAINLESS STEEL PNEUMATIC ACTUATOR (50802) ...
BENE INOX
DN: 8 mm - 80 mm
Temperature: -10 °C - 50 °C
... 2 PIECES F/F BALL VALVE (58308) WITH IP65 ELECTRIC ACTUATOR (50835) ...
BENE INOX
DN: 20 mm - 50 mm
Temperature: -20 °C - 70 °C
... 3 WAYS F/F/F BALL VALVE WITH L BORE (58213) WITH IP68 ELECTRIC ACTUATOR (50844) ...
BENE INOX
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 220 °C
... saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. Applications - Air for aeration in wastewater ...
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C
... saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment plant Gases Municipal ...
Pressure: 0.2 bar - 8 bar
Temperature: 1 °C - 75 °C
Flow rate: 12, 17, 35 l/min
... Materials: stainless threads, POM parts, brass solenoid components
Applications
Designed for hotels, airports, shopping centers, schools, hospitals,
industrial facilities and other high-traffic public ...
DN: 0 mm - 10,000 mm
... Overview
Industrial
pneumatic foot pedal
valves for hands-free control of machines and
pneumatic tooling. Available in 3/2, 4/2 and 5/2 way configurations with BSP 1/4" connections. ...
DN: 0 mm - 10,000 mm
Pressure: 0 psi - 150 psi
Temperature: -10 °C - 150 °C
... Overview
API 607 fire‑safe certified ball
valves, gate
valves and process
valves from MARS
Valve UK. Designed for fire‑safe operation in
industrial process ...
MARSVALVEUK
DN: 3.175 mm - 50.8 mm
Pressure: 0 bar - 137.9 bar
Temperature: -20 °C - 180 °C
... reduced-bore ball valves in CF8M stainless steel. Economical, compact and reliable with blow-out proof stems, insulated grips and lockable lever handles. Investment cast with low torque for safe operation across general and industrial ...
MARSVALVEUK
DN: 8 mm - 50 mm
Pressure: 0 psi - 1,000 psi
Temperature: -20 °C - 100 °C
... Three-Piece Ball Valve
MARSVALVEUK
DN: 0 mm - 10,000 mm
Pressure: 20,000 psi
... high-pressure ball valve engineered for industrial systems requiring reliable shut-off and accurate flow control. Suitable for both liquids and gases, it can be configured for manual or actuated operation to meet process ...
DN: 0 mm - 10,000 mm
Pressure: 7,500 psi
... control valve designed for precise regulation of fluid pressure in industrial systems.
Applications
- Suitable
DN: 15 mm - 65 mm
Pressure: 0 bar - 10.2 bar
Temperature: 0 °C - 180 °C
... Description Compact positioner with analogue control. Compressed air for remote control necessary. The stroke is made proportional to the flow through the paraboüc contour of the piston. The valve shuts tight and is of ...
Pressure: 0 bar - 40 bar
Temperature: 95 °C
... Externally controlled valve for the hydrogen sector Valves for hydrogen and oxygen in electrolyser operation Pneumatically operated 2/2-way valve - Direct pressure control Designed for electrolysers - ...
DN: 3, 0, 4 in
Pressure: 230 mbar - 8,000 mbar
Temperature: -20 °C - 40 °C
... . 10/520 19/03/1955 and subsequent amendments. Valve is used to prevent any possible overfill during charging hazardous or dangerous fluids. Application: petrochemical. food. pharmaceutical & more. Valve ...
DN: 2 in - 6 in
Pressure: 50 mbar
Temperature: -20 °C - 60 °C
... Male threaded emergency vent is normally used to protect the aboveground storage tank from overpressure. It has 50 mbar pressure relief. It even helps to reduce the evaporation of fuel and environmental pollution. material: - Aluminium - Stainless ...
DN: 32 mm - 1,400 mm
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 180 °C
... with maximum concentration of solid of 5% Industrial Applications of Unidirectional Knife Gate Valves Paper Industry Mining Silo emptying Chemical plants ...
Flowrates
DN: 50 mm - 10,000 mm
Pressure: 10, 16, 6 bar
Temperature: -30 °C - 750 °C
... building the valves in the most accurate way to withstand the harshest process conditions. For special high temperature applications, ceramic lining inside the body is available according to customer ...
Flowrates
DN: 50 mm - 5,000 mm
Pressure: 6, 10, 16 bar
Temperature: -30 °C - 750 °C
... building the valves in the most accurate way to withstand the harshest process conditions. For special high temperature applications, ceramic lining inside the body is available according to customer ...
Flowrates
DN: 15 mm - 100 mm
Pressure: 10 bar
Temperature: 0 °C - 80 °C
... Possibility of automation with electric actuator 230V / 24V or pneumatic actuator DA, NC, NA Advantage • Seat, torus and ball, interchangeable • Wide connection possibilities Applications • Water treatment Use To ...
DIVATEC,SL
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 100 °C
... • BV ball valves for chemical fluids • PVC-U, PVC-C (HT), PP or PVDF thermoplastic materials • EPDM, FKM gaskets, on request we have a FKM FB with glass fiber loading for very corrosive fluid applications • PTFE ball ...
DIVATEC,SL
DN: 20 mm - 75 mm
Pressure: 10 bar
Temperature: 0 °C - 100 °C
... possibilities Applications Construction of chemical facilities Water treatment Use To cut pipe systems Fluids Neutral media free of solids and aggressive liquid or gaseous media ...
DIVATEC,SL
DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C
... electric or pneumatic rotary actuator. Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after other equipment ...
... started flow valves are chosen for their configuration, which can be easily placed in systems where pipes are intertwined and the spaces are not large. It is in these cases that the 90° valve can be preferred to the 45° ...
the best suppliers