Power: 650 W - 1,020 W
Maximum temperature: -15 °C - 30 °C
Flow rate: 10 l/min
... REFRIGERATORS INERTIAL STORAGE CHILLERS – ICE BANK CHILLERS INDUSTRY chemical and pharmaceutic manifacturing food APPLICATION aggressive liquids cooling dairy production testing and measurements STANDARD ...
Power: 550 W
Maximum temperature: 0 °C - 65 °C
Flow rate: 9 l/min - 16.5 l/min
RAWserie AIR-TO-WATER COOLERS INDUSTRY manifacturing rubber and plastic APPLICATION laser sources plastic molding welding, machinetools STANDARD FEATURES The RAW series coolers ...
Power: 160 W
Maximum temperature: 10 °C
Flow rate: 7 l/min
... bulky machines. Simply connect it to a water bath and it will start to lower the temperature of the liquid inside. The instrument comes with a KIT for connecting to the tank. Features Outer ...
Maximum temperature: 230, 90 °C
Pressure: 3 bar - 7 bar
Amount of Water in the Pipe 18 Lt. Amount of Air Outside the Pipe 34 Lt.
Didar Industrial Cooling INC
Maximum temperature: 90, 220 °C
Pressure: 2.6 bar - 8 bar
Amount of Water in the Pipe 7 Lt. Amount of Air Outside the Pipe 44 Lt.
Didar Industrial Cooling INC
Maximum temperature: 230, 90 °C
Pressure: 2 bar - 7 bar
Amount of Water in the Pipe 58 Lt. Amount of Air Outside the Pipe 120 Lt.
Didar Industrial Cooling INC
Power: 1,600 W - 30,000 W
Vulcanic chillers are automatic units designed to cool all industrial or tooling processes by means of a circulating fluid (water, glycol water or ISO VG2 oil, etc.). Due to its mobility ...
Power: 15 W
Maximum temperature: 85 °C
Flow rate: 55 l/min - 145 l/min
... highly resistant to pressure and completely compatible with sea water. Usually installed on inverters mounted with engines up to 190hp. MOTA design ensures that this cooler will not experience thermal ...
MOTA
Maximum temperature: 90 °C - 120 °C
Flow rate: 145 l/min
Pressure: 10 bar - 30 bar
... highly resistant to pressure and completely compatible with sea water. Usually installed on inverters mounted with engines up to 260hp. MOTA design ensures that this cooler will not experience thermal ...
MOTA
Maximum temperature: 85 °C
Flow rate: 55 l/min - 145 l/min
... highly resistant to pressure and completely compatible with sea water. Usually installed on inverters mounted with engines up to 320hp. MOTA design ensures that this cooler will not experience thermal ...
MOTA
Maximum temperature: 343, 621 °C
Flow rate: 3.5 l/min
Pressure: 450, 300, 356 psi
The Sentry FLR sample cooler cools a sample from a process stream. It may seem simple, but it is a uniquely designed small tube in a shell heat exchanger. The sample cooler is compact and provides broad ...
Sentry Equipment
... the sun can increase the water temperature within the tank shower to levels which may scald a user upon activation. This flameproof chiller is suitable for use in hazardous environments, ATEX Zone 1, ...
Maximum temperature: 16 °C - 38 °C
... temper the water within the tank in hot ambient climates, without the need for power! EN15154 and ANSI Z358.1-2014 standards state that water delivered by a safety shower should be tepid. In extreme ...
Cooling system to be connected to the undevacuum homogenizer or to the tube filling and closing machine. Dimensions and capacity following to the custoner needs.
Power: 500 W - 9,000 W
Maximum temperature: -20 °C - 35 °C
Flow rate: 5, 3, 13 l/min
... of recirculating water chillers to match all laboratory needs. The LabTech’s state-of-the-art water chillers ensure accurate and constant cooling conditions of instruments ...
... zones allowing adaptation to process specific cooling curves to achieve superior product quality. The cooling water is reused in a closed water circuit and therefore does not pollute the environment. ...
... same overall cooler length. Additionally, it enables effective cooling of thick products at high production rates. Like the SBC, the DBC can be operated with different temperature zones to achieve superior product quality ...
Maximum temperature: 60 °C
... through a stainless steel spiral, which runs in a stainless steel water tank. The thermal energy is transferred to the water. Since the heat capacity of water is comparatively high, the ...
... solutions for water/glycol as well as for transformer oil. The right choice of the heat sink design is highly important at thermal management of power electronics. Precise hardware if required to transfer heat from ...
Power: 2,500 kW - 8,000 kW
... set is made of copper-aluminum or wear plate that made of copper-aluminum, copper-copper, steel- aluminum. 3.The cooling water pipe lineis composed of single pipe or copper-copper double pipe. 5.The size of flange ...
ERG Technology
Power: 145, 240, 110, 230 W
Maximum temperature: -20, -35 °C
... ® Dip Cooler fits neatly and unobtrusively into the corner of the bath and can be secured with a specially designed mounting bracket (supplied). If cooling can be achieved by using cold tap water, a dip ...
Techne Calibration
Modular chillers with combinations of up to 5 modules, expandable at any time. Main features include: Scroll compressors Axial fans Stainless steel plate heat exchangers
Variant chillers have been specifically designed for heavy-duty tasks. Centrifugal fans Variable power screw compressor Cooling capacity fitting real needs Optional device for extra energy saving
MITA Systems Cooling Stations for Tower Water Management Complete solutions specifically studied and designed for a more efficient and automatic management of evaporative cooling towers and coolers. Complete ...
... Bed Sand Coolers are specially designed for evaporative cooling or drying of foundry sand. Air distribution decks are engineered to provide complete control of airflow for exceptional drying or cooling efficiency. OPTIONS: • ...
Power: 1,420 W - 81,680 W
Maximum temperature: 5 °C - 27 °C
Flow rate: 8 l/min - 366.7 l/min
... compressors with low energy consumption. • Electronic microprocessor thermoregulator for fluid temperature control and display. • Chiller malfunction signal display (except for ACW-LP 12 model and for optional features ...
As a global company J & E Hall have the capability to work to a wide range of internationally recognised design codes and standards including: EN378 Refrigeration systems safety code ASME 8 and PD5500 vessel codes ANSI ...
Power: 13 kW - 401 kW
CTA
Power: 6,000 W
Maximum temperature: -25 °C
With the performance-enhanced chillers of the Vario-Line, KKT chillers set new standards in process cooling and simultaneously offers its clients a variety of interesting advantage More Efficiency, lower ...
KKT chillers
Power: 45,000 W
Maximum temperature: -20 °C
For sharp images in imaging diagnostics. In the OEM segment, we cooperate with leading medical device manufacturers to develop specific cooling solutions for worldwide use and also advise radiologists on-site about selecting the suitable ...
KKT chillers
Power: 27, 44, 69 kW
Maximum temperature: -40 °C - 55 °C
Healthcare chiller solutions The energy efficient chiller "OCLC MED“ are developed and produced for cooling medical imaging, which could be used at an ambient temperature from -40°C up to +55°C. Developed ...
KKT chillers
... the desuperheaters is to bring cooling water to the cooling chamber in the state of maximum atomization in the whole range of working pressures and flow. injection valves – regulate the supply of cooling water ...
Power: 3 kW
... the feeding device to move along with the conveyer belt. The effect of cooling is achieved by spraying and soaking with cold water.
Power: 3 kW
Cold-water Type Cooling Machine is generally placed and used after Shrimp-cooking Machine, and applied in cooling down the freshly cooked shrimps. Its working principle: freshly cooked shrimps will be conveyed from Shrimp ...
Power: 50 kW - 800 kW
Maximum temperature: -8 °C - 65 °C
... range from 50 kW to 800 kW: Comfort: Split chiller with remote gas cooler for water outlet temperature from +15° C to +5°C, with optional heat recovery Brine: Split chiller ...
Power: 50 kW - 600 kW
Maximum temperature: -8 °C - 65 °C
... transcritical reversible heat pumps – chillers for the heating and cooling of water and brine mixtures, suitable for HVAC, district heating, and other applications. It offers a split configuration with ...
Please specify:
Help us improve:
remaining