Universal data-logger ALMEMO® 510

USBradio frequencywith PC interface

• ALMEMO® device of the latest generation V7. • Operation as a PC interface for online measurement with WinControl software from WC2 standard (accessory). • Modular measuring system with active measuring circuit boards. Each measuring circuit board has its own address (adjustable). 3 different housing designs are available. • 2 measuring circuit boards as standard, 20 ALMEMO® input sockets, galvanically isolated for the connection of up to 20 ALMEMO® sensors of all generations (analog/DIGI/D6/D7), up to 200 sensor channels (sensor-dependent). • Expansion with additional measuring circuit boards, depending on the housing width, up to 100 measuring inputs with up to 1000 measuring channels. • Sensors with analog signals are measured with the built-in fast and high-resolution AD converter. The additional electrical isolation between measurement inputs and supply (device ground) increases the measurement quality. Digital D6 sensors and the new digital D7 sensors transmit their measured values digitally to the measuring device. The measuring device supports all ALMEMO® connector and sensor functions. The complete configuration of all sensor parameters for ALMEMO® standard, D6 and D7 sensors is carried out via the ALMEMO® Connect software (included in delivery). • The KL option allows multi-point adjustment or linearization to be programmed in the ALMEMO® connector for ALMEMO® sensors (e.g. for temperature sensors or pressure sensors). This is possible with all ALMEMO® connector versions: standard connectors (analog or with DIGI range), ALMEMO® D6 and D7 connectors. • Interface card with digital interface via 1 ALMEMO® output socket A1 (common for all measuring circuit boards). All ALMEMO® networks are possible via the digital ALMEMO® output cables: RS232, USB, Ethernet, WLAN, ALMEMO® radio module. • The complete configuration of all device parameters is carried out with the ALMEMO® Connect software (incl. in delivery). • Display of the operating states on the interface card and the measuring circuit boards via LEDs. • For long-term measurements, a rechargeable battery pack is available (accessories) to bridge (brief) interruptions in the power supply. • If the connection to the PC is interrupted, the measured values in each measuring circuit board can be buffered in the built-in data memory (FAIL SAVE mode, configurable). • The RTA6 relay/trigger/analog interface is available as a plug-in card (accessory) for the output of alarm and control signals. The outputs can be controlled either directly from the measuring device or from the WinControl software (with alarm function, optional).