Round cap

thermoplasticpolyurethanetransparent

Blanking caps can be used to prevent contamination during cleaning or change over, as well as being used as a viewing port. BFM® blanking caps can be used to prevent contamination during clean down or change-over. Made with our strong and transparent Seeflex material, meaning they are ideal for use as sight-glasses/inspection ports. They also protect products and prevent dust emission into the factory. Application Useful in closed vessels where you require product flow visibility. Can be used as a 'blind plug' to close off parts of your equipment to prevent dust emission into the factory. Key Features Can be used to seal off machinery to prevent dust emission into the factory Allows for visibility of product flow in closed vessels Physical properties Construction/ Finish Gloss/Gloss Wall Thickness (+/- 10%) 0.9 mm / 1/32 inch Breathable No Hardness (Shore A) 90 Tensile Strength (MPa) 40 Dust tight? Yes Operating Conditions Surge Temp 120°C/ 248°F Vibration Yes Oscillation Yes Compression No Certification and Compliance FDA and USDA FDA 21 CFR 177.1680 & 177.2600 and USDA 3A Certified Manufactured from 3A 20-27 certified Seeflex Material and the BFM® cuff and spigot system is a 3A certified 63-04 sanitary fitting. EU Approved (EC) 1935/2004, 2023–2006 & 10/2011 Atex Certified IBExU tested. Approved for all dust explosion hazardous areas. Some restrictions apply. Dimensions Applicable Connector Lengths 30mm (1 3/16") only If you are after a longer length, look at the Blanking Bin / Sock. Options Available as Tool Release? Yes to Ø650mm Quick Access Port Option? No