Thermal pressure sensor MHP

4-20 mAstainless steelIP65

The CNPS-MHP type is a dry ceramic piezoresistive sensor imported from Germany using ceramic materials and refined by special techniques. Ceramic is a recognized material that is highly elastic, corrosion resistant, abrasion resistant, impact resistant and vibration resistant. The thermal stability of the ceramic and its thick film resistance can be as high as -40 ° C ~ +120 ° C, and it has high precision and high stability. The degree of electrical insulation is >2kv, the output signal is strong, and the long-term stability is good. There is a tendency to completely replace other types of sensors in European and American countries. The output of the sensor adopts the 4-20 mA two-wire industrial standard. The outer casing is made of corrosion-resistant stainless steel and German Hirschmann joints. The protection grade can reach 1P65. In addition to oil fields, it is widely used in industrial control, mining, food processing, automobiles, Many industries such as electronics and medical care. Electrical line protection: polarity protection, over current protection 3 Installation and use The sensor can be mounted directly on a suitable threaded interface. The mounting position has no effect on the measurement. In order to meet the CE standard, a shielded cable must be used. The shield of the cable must be connected to the casing and the ground. Do not pull or pull the lead of the sensor when using it. Do not use the lead to pull the sensor. The aviation plug should not be immersed in water.