OverviewDTH boring machines from YG are designed to drill holes between 4 and 10 inches (approx. 83–165 mm) for blast holes, rock anchor holes, bolt holes and grouting holes. The YG family includes five models that cover a wide diameter range and varied chassis weights to deliver predictable productivity and cost-per-meter in quarrying and open-pit mining operations.
YG models (summary)YG offers five models to address applications from small aggregate quarries to larger blast patterns and extended shifts. Models differ by chassis weight, travel speed, fuel capacity and power configuration to match jobsite needs.
Model specification tableModel: YGS100A | YGS153 | YGS180 | YGS300 | YGS350
Total weight: 5.95T | 3.8T | 6.3T | 6.8T | 8T
Walking speed: 2.5km/h | 2.5km/h | 2.5km/h | 2.2/3.8km/h | 4km/h (high) / 2km/h (low)
Diesel tank capacity: 85L | 70L | 85L | 85L | 225L
Shipping size: 6500*2100*2400mm | 4640*1980*2260mm | 6600*2110*2500mm | 6600*2220*2600mm | 7600*2350*2800mm
Drilling hole diameter: 90-146mm | 83-130mm | 90-146mm | 90-152mm | 90-165mm
Power configuration: YCD4R22T-80 | YC2108 33kw/2400rpm | YCD4R22T-80 55kw | YC4DK80-T302 | YC4DK100-T304 73.5kw/2200rpm
Highest horizontal hole height: 3.2m | 2.8m | 3.6m | 3.25m | 3.5m
Typical DTH drilling system components- Drilling rig: supports drilling operation and provides feed and rotation.
- DTH hammer: operates with compressed air to deliver repeated impacts to the bit.
- Drill bit: breaks rock by impact and cutting action; selection depends on rock type.
- Drill pipes: transfer rotation and air between hammer and rig; rod length affects maximum depth.
- Air compressor: supplies required airflow and pressure and helps evacuate cuttings from the hole.
Applications- Quarrying (blast holes)
- Open‑pit mining
- Water well drilling
- Foundation anchoring and rock anchors
- Road cutting and slope benching
Practical deployment guidanceSelect the rig model based on bench height, target hole diameter, rock type and the DTH hammer intended for use. DTH drilling performs best in hard rock for 4–10 inch holes and when depths exceed roughly 15–20 m. Size the compressor (CFM and pressure) to the hammer specification; an undersized air package is the most common source of poor drilling performance.
Case study (summary)Andesite quarry — YGS300 recommended for 140 mm blast holes: per‑hole drilling time reduced by ~40%; improved bit life; straighter holes cut secondary blasting by half; investment payback under 8 months.
FAQ highlights- Maximum drilling depth (standard): up to 30 m (longer rods available on request).
- Suitable rock types: granite, basalt, limestone and hard sandstone (choose hammer/bit to match compressive strength).
- Small quarry recommendation: YGS153 for 83–130 mm holes (lightweight and easy to reposition).
- Container shipping: YGS153 fits a 20 ft container; larger models ship in 40 ft containers (verify shipping sizes above).
- Air compressor: required for pneumatic DTH hammers; confirm hammer airflow and pressure before purchase.
Technical specifications- Commercial name (series): YG DTH Boring Machine (models: YGS100A, YGS153, YGS180, YGS300, YGS350).
- Drilling hole diameter range across models: 83 mm to 165 mm.
- Total weight per model: from 3.8 tonnes (YGS153) to 8 tonnes (YGS350).
- Walking/self‑propelled travel: up to 4 km/h on YGS350; typical 2.5 km/h on lighter models.
- Diesel fuel capacity: 70 L to 225 L depending on model.
- Shipping dimensions provided per model (see table lines above).
- Power options vary by model (examples: YC2108 33 kW; YC4DK100‑T304 73.5 kW at 2200 rpm).
- Maximum standard drilling depth: up to 30 m (customization available).
- Horizontal drilling capability: up to 3.6 m horizontal hole height on selected models.