Product overviewA portable water well drilling rig from the YG series is a compact, transportable drilling unit designed to access groundwater in confined sites or where large rigs are impractical. These units support rotary and DTH percussion methods and are offered in multiple configurations to match site conditions, hole diameter and target depth.
Applications- Agriculture: irrigation wells for crops, orchards and livestock watering.
- Residential: private wells for homes, cottages and off-grid properties.
- Small commercial sites: water supply for parks, resorts and light industrial needs.
- Geotechnical & environmental: groundwater sampling, monitoring and shallow site investigations.
How it worksYG series rigs typically use rotary drilling for soils and air/DTH percussion for harder rock. Hydraulic drives provide controlled feed and rotation; some models include mechanical drive options for simpler maintenance. Configurations allow operation by a small crew or single operator with rod-handling aids.
Drilling methods and systems- Rotary drilling: continuous rotation with appropriate bits for soft to mixed formations.
- DTH percussion: down-the-hole hammering for efficient penetration in hard rock.
- Hydraulic vs mechanical: hydraulic systems deliver smooth variable control; mechanical systems are lighter and simpler.
Top benefits- High mobility: compact footprint for access through gates and narrow tracks.
- Lower operating cost: smaller engines reduce fuel consumption and logistics.
- Minimal site disturbance: reduced footprint protects landscaping and surfaces.
- Flexible drilling modes: supports rotary, mud/rotary and DTH where required.
- Quick setup: fast mast assembly and simple stabilization shorten mobilization time.
Table — Example models and key parametersModel | YG180 | YG240 | YG280 | YG350 | YG500
Voltage | 220V | 220V | 380V | gasoline/diesel | 380V
Power | 1.5–2 kW | 4 kW | 3 kW | 8 HP | 5.5 kW
Drilling hole (diameter) | 80–200 mm | 80–220 mm | 80–350 mm | 80–280 mm | 80–500 mm
Drilling depth | 80 m | 100 m | 100 m | 120 m | 120 m
Drill rod | Φ42 mm, 1.5 m | Φ51 mm, 1.5 m | Φ51 mm, 1.5 m | Φ51 mm, 1.5 m | Φ65 mm, 2 m
Pump power | 2.2 kW | 2.2 kW | 2.2 kW | 3.5 HP | 5.5 kW
Dimensions (approx.) | 0.7×0.7×2.5 m | 0.7×0.7×2.5 m | 0.8×0.8×2.7 m | 0.8×0.8×2.7 m | 1×1.5×2 m
Weight (approx.) | 120 kg | 150 kg | 250 kg | 200 kg | 600 kg
Who needs this equipmentSuitable for drilling contractors, agricultural operators, small commercial site managers and organizations performing local water-supply works or geotechnical surveys that require a portable, quickly deployable borehole solution.
Typical questions & answers- How deep can it drill? Typical small models reach up to ~80–150 m depending on model, configuration and ground conditions.
- Can one person operate it? Many models are designed for two-person operation; some configurations with rod loaders permit single-operator use.
- Can the same rig drill soil and rock? Yes. Rigs supporting both rotary and DTH methods can be adapted for soil or rock by changing bits and operating mode.
- What routine maintenance is needed? Regular checks include hydraulic fluid level, lubrication of moving parts, air filter service and inspection of drill rods and connections.
- Are spare parts available? Spare parts availability depends on supplier and model; manufactured rigs typically have standard spare parts packages.
Technical characteristics / specifications- Product family: compact/portable water well drilling rigs (YG series).
- Available models: YG180, YG240, YG280, YG350, YG500.
- Power options: 220 V, 380 V or small gasoline/diesel engines depending on model.
- Power range: ~1.5 kW up to ~5.5 kW or small HP-rated engines.
- Drilling diameter: ~80 mm up to ~500 mm depending on model.
- Typical maximum depth: 80–120 m (model dependent); practical depths to ~150 m in favourable geology.
- Common drill rods: Φ42 mm (1.5 m), Φ51 mm (1.5 m), Φ65 mm (2 m).
- Pump power examples: 2.2 kW, 3.5 HP, 5.5 kW.
- Approx. dimensions and weights vary by model (footprints compact; weights ~120–600 kg).
- Supported drilling methods: rotary, mud/rotary and DTH percussion.