OverviewA GRC spray machine sprays glass fibre reinforced concrete (GRC) by combining cementitious slurry and alkali-resistant glass fibres at the spray head. The equipment is intended for manufacturing facade panels, decorative architectural elements, and for wet-mix shotcrete applications in tunnels and underground construction. It improves production speed and consistency while reducing labour.
How it works- Material loading: Cement, fine sand and water slurry is loaded into a hopper; a sieve filters large particles to prevent blockages.
- Pumping: A pump pushes the slurry through a hose to the spray gun; pump speed controls output.
- Fibre chopping: Glass fibre roving is fed from a tray and chopped at the machine to specified lengths (typical fibre output ranges shown in specifications).
- Spraying: Compressed air atomises the slurry at the spray gun while chopped fibres are introduced into the slurry cone and blown onto the mould or surface.
- Compaction: The sprayed GRC is rolled or compacted to remove air and achieve density and strength.
YG GRC Spray Machine - Key Parameters (per model)Parameter — YG-GRC200 — YG-GRC300
Slurry Output — 10-15 kg/min — 12-20 kg/min
Fibre Output — 500-800 g/min — 600-1000 g/min
Motor Power — 2.2 kW — 4.0 kW
Pump Type — Peristaltic Pump — Progressive Cavity Pump
Hopper Capacity — 80 kg — 150 kg
Machine Weight — 180 kg — 420 kg
Dimensions (L*W*H) — 1000*600*1200 mm — 1260*1460*1500 mm
Power Supply — 380V, 3-phase — 380V, 3-phase
Control System — PLC + Touchscreen — PLC + Touchscreen
Spray Gun Type — Concentric Spray Gun — Concentric + Facing Coat Gun
Features- Peristaltic pump option: Multi-roller low-pulse pump option keeps fibres intact and minimizes wear; material-contact parts do not have rotating seals.
- Articulated spray boom: Supports spray gun and hoses to reduce operator fatigue; boom reach up to ~3.5 m; includes roving guides and tray.
- Easy cleaning: Pump and hoses are designed for quick cleaning with quick-release couplings; sponge-ball cleaning supported for hoses.
- IP66 control panel: Waterproof electrical enclosure suitable for wet construction environments; includes clear, color-coded air gauges and PLC with touchscreen.
- Low-level hopper: Hopper height designed for easy loading; capacities vary by model (80–150 kg).
- Versatile spray guns: Concentric spray gun for general spraying and facing coat gun for mist coats; lightweight and easy to dismantle for cleaning.
Applications- Building facades and lightweight cladding panels.
- Architectural decoration: columns, cornices and ornamental mouldings resembling natural stone.
- Landscape products: garden furniture, planters and decorative elements with good weather resistance.
- Tunnels and mining: wet-mix shotcrete applications for rock support and lining.
- Repair and renovation works: fast application for concrete repair and overlays.
Process Summary- Slurry preparation and sieving → pump transfers slurry → fibre feeding and chopping → combined spraying at gun → compaction/rolling of sprayed layer.
Case Studies (summaries)- Architectural panel factory (UAE): A factory adopted the YG-GRC300 with articulated boom to increase panel production. Reported doubled production speed and more consistent panels after machine introduction.
- Underground construction (Chile): A contractor used the wet-mix system with a peristaltic pump for tunnel shotcrete. The equipment operated reliably under harsh underground conditions and the contractor ordered additional units after six months.
Frequently Asked Questions- What materials are used? Cement-sand slurry and alkali-resistant glass fibre roving; slurry is pumped and fibres are chopped at the spray head.
- How much can it spray per minute? Depending on model, slurry output ranges from about 10–20 kg/min (YG-GRC200: 10–15 kg/min; YG-GRC300: 12–20 kg/min).
- How is the machine cleaned? Hoses and gun are designed for quick removal and cleaning; sponge-ball flushing can be used through hoses; spray gun is dismantlable for cleaning.
- What power is required? Standard models use 380V, 3-phase; voltage can be adapted for other regions.
- Is it easy to operate? Yes — PLC with touchscreen controls the process and simplifies operator training.
Caractéristiques / spécifications techniques- Models: YG-GRC200, YG-GRC300
- Slurry output: 10–15 kg/min (YG-GRC200), 12–20 kg/min (YG-GRC300)
- Fibre output: 500–800 g/min (YG-GRC200), 600–1000 g/min (YG-GRC300)
- Motor power: 2.2 kW (YG-GRC200), 4.0 kW (YG-GRC300)
- Pump type: Peristaltic pump (YG-GRC200) or Progressive cavity pump (YG-GRC300)
- Hopper capacity: 80 kg (YG-GRC200), 150 kg (YG-GRC300)
- Machine weight: 180 kg (YG-GRC200), 420 kg (YG-GRC300)
- Dimensions (L×W×H): 1000×600×1200 mm (YG-GRC200), 1260×1460×1500 mm (YG-GRC300)
- Power supply: 380V, 3-phase
- Control system: PLC + Touchscreen
- Spray gun types: Concentric spray gun; Concentric + facing coat gun (YG-GRC300)