Product OverviewA cold paint road marking machine applies liquid paint to roads, parking lots and industrial floors without heating. It uses an engine-driven high-pressure plunger pump for airless spraying, producing sharp, even lines with consistent thickness. Typical drying time is 10–30 minutes depending on paint formulation and environmental conditions.
Operation PrincipleThe engine drives a plunger pump that forces paint through a high-pressure hose to the spray gun. High-pressure airless spraying yields accurate, low-overspray lines. No heating is required (unlike thermoplastic systems that melt powder at high temperature).
Key Components- Gasoline engine (typical range 4.3–7 HP)
- High-pressure plunger pump (imported) providing stable pressure and low pulsation
- Stainless-steel spray gun(s): single or double configurations
- Paint tank with filter system
- Glass-bead dispensing system for night reflectivity
- High-pressure hose (typical length 10–16 m)
Typical Models and Variants- Single-gun (lighter unit for parking lots and small roads)
- Double-gun (wider coverage for highways, airports and large areas)
Specification ExamplesModel | YG-8S | YG-8D
Power | 5.5 HP | 5.5 HP
Plunger Pump | Electronic commutation | Automatic reciprocating
Spray Gun Quantity | Single gun | Two guns
Operation Mode | Hydraulic drive | Hydraulic drive
Working Pressure | 8–12 MPa | 8–12 MPa
Flow Rate | 4.8 L/min | 8 L/min
Spray Width | 100–300 mm | 100–450 mm
Spray Thickness | 0.2–0.4 mm | 0.2–0.4 mm
Dimensions | 1600 × 800 × 1200 mm | 1600 × 800 × 1200 mm
Weight | ~120 kg | ~120 kg
Applications- Urban roads: lane lines, pedestrian crossings, arrows — fast drying reduces traffic disruption
- Parking lots: marking bays, arrows and restricted zones with adjustable spray width
- Factories and warehouses: internal traffic lanes, safety zones and storage markings on concrete floors
- Airports and runways: ground guidance signs and safety boundaries — double-gun models improve coverage speed
- Rural roads: cost-effective marking for lower-traffic roads (typical durability 6–12 months)
- Temporary markings: construction zones or provisional paint that will be removed or overlaid later
Cold Paint vs Thermoplastic (comparison highlights)Heating Required | No | Yes (≈180–200 °C)
Paint Type | Liquid (solvent- or water-based) | Powder (melted)
Drying Time | 10–30 minutes | ~6 seconds (after application process)
Line Thickness | 0.2–0.4 mm | 1.5–1.8 mm
Line Life | 6–12 months | 2–4 years
Reflectivity | Lower (requires glass beads applied) | Higher (beads mixed in or applied)
Equipment Cost | Lower | Higher
Operation | Simple, one operator | Often requires more personnel and heating setup
Selection Guidance- Use single-gun units for small jobs (parking lots, small roads); choose double-gun for large projects (highways, airports)
- Select engine power by project size: higher HP increases pressure and output
- Confirm paint compatibility (solvent-based vs waterborne); waterborne paints reduce environmental impact
- Prefer models with adjustable spray width (commonly up to 50–600 mm) for versatility
- Consider portability: lighter machines ease transport; heavier units offer stability for large-area work
- Use a glass-bead applicator when nighttime reflectivity is required
Features That Improve Reliability and Usability- No heating required — straightforward fill-and-spray operation
- High-pressure airless spraying for sharp, low-overspray lines
- Adjustable spray width for different line sizes
- Stainless-steel guns for corrosion resistance
- Vibration-reduction systems to maintain straight lines on rough surfaces
- Quick-dry formulations to allow rapid traffic return
- Easy cleaning: high-pressure flushing of hoses and guns after use
Why Choose YG Cold Paint Road Marking Machine- Factory-direct production with OEM support
- Reliable engines and imported pumps for consistent performance
- Compact, lightweight options for site mobility
- CE certification on applicable models
- Available stock and spare parts for maintenance
Operation and Maintenance Tips- Before use: check engine oil, clean paint filter, inspect high-pressure hose, fill paint tank
- After use: flush system with suitable cleaner or water, clean spray nozzles and wipe the machine
- Regular maintenance: change engine oil ~every 50 hours, lubricate moving parts monthly, replace worn nozzles, store in dry place
Technical Specifications- Models: YG-8S (single gun), YG-8D (double gun)
- Engine power: typically 4.3–7 HP (example 5.5 HP)
- Plunger pump: high-pressure imported plunger pump (electronic commutation / automatic reciprocating options)
- Operation mode: hydraulic drive
- Working pressure: 8–12 MPa
- Flow rate: 4.8 L/min (single) up to 8 L/min (double)
- Spray width: typical 100–300 mm (single), 100–450 mm (double); adjustable up to commonly 50–600 mm
- Spray thickness: 0.2–0.4 mm
- Typical dimensions: ≈1600 × 800 × 1200 mm
- Typical weight: ≈120 kg (varies by model)
- Paints supported: solvent-based and waterborne liquid paints
- Glass bead system: optional or integrated applicator for night reflectivity
- Suitable for: urban streets, parking lots, factories, airports, rural roads and temporary markings