Product overviewA cement mortar spray machine pumps and sprays mortar onto vertical and horizontal substrates, replacing manual plastering to accelerate finishing operations. Typical model output ranges 3–6 m³/h. Electric and diesel power units are available. The equipment handles cement mortar, gypsum, lime, ready-mix plaster and insulation materials.
YG mortar spraying machine — models- YG-311: Capacity 3 m³/h · Pressure 3 MPa · Particle size ≤ 4 mm · Voltage 220V/380V 50Hz · Motor 4 kW · Hopper 60 L · Horizontal 30 m · Vertical 20 m · Weight 200 kg · Air consumption 0.3 m³/min
- YG-318: Capacity 3–5 m³/h · Pressure 3 MPa · Particle size ≤ 8 mm · Voltage 380V three-phase 50Hz · Motor 7.5 kW · Hopper 80 L · Horizontal 50 m · Vertical 30 m · Weight 320 kg · Air consumption 0.3 m³/min
- YG-711: Capacity 4–6 m³/h · Pressure 3 MPa · Particle size ≤ 8 mm · Voltage 380V three-phase 50Hz · Motor 7.5 kW · Hopper 100 L · Horizontal 50 m · Vertical 30 m · Weight 340 kg · Air consumption 0.3 m³/min
How it worksThe machine conveys mixed mortar through a pump and hose; compressed air at the nozzle atomizes the material and projects an even coating without pulsation.
Main components- Hopper for prepared mix
- Pump (rotor-stator or piston)
- Integrated air compressor
- Spray gun and nozzle set
- Control valves for pressure and output adjustment
Main benefits- Reduces labor: one unit replaces multiple plasterers
- Increases productivity: higher daily coverage rates
- Uniform finish: consistent layer thickness and surface quality
- Lower material waste: typically under 5%
- Reduced operator fatigue compared with manual trowelling
Common applications- Interior wall plastering (gypsum, lime)
- Exterior façade rendering with cement mortar
- Tunnel lining and shotcrete operations
- Bridge and road finishing
- Water-conservancy structures and dam surface finishing
- Spraying insulation materials on exterior walls
Technical specifications- Output: 3–6 m³/h depending on model
- Vertical conveying: up to 30 m
- Horizontal conveying: up to 50 m
- Working pressure: ~3 MPa
- Acceptable particle size: typically ≤ 4–8 mm
- Example mix ratio: Water : Ash : Sand = 0.7–1 : 1 : 3 (guideline)
- Voltage options: 220V / 380V (three-phase)
- Main motor: 4–7.5 kW
- Hopper volumes: 60 L, 80 L, 100 L
- Air consumption: ~0.3 m³/min
- Machine weight: ~200–340 kg
- Power types: electric and diesel configurations
- Features: reverse flushing for cleaning, compact mobile design with wheels, 1-year warranty on mechanical and electrical parts