OverviewRoad-marking equipment for heating, mixing and laying thermoplastic material in a single pass. Self-propelled models on this page: YG-360S and YG-380S. Machines feature 100 kg double stainless-steel insulated tanks, 48V lithium battery power and an adjustable spreading width from 50 mm to 200 mm. Designed to increase crew productivity and enable continuous marking by reheating a second tank while operating.
Models- YG-360S — self-propelled thermoplastic pavement marking unit; dimensions 1210 x 970 x 1070 mm; net weight ~130 kg.
- YG-380S — similar self-propelled unit; dimensions 1200 x 970 x 1100 mm; net weight ~100 kg (approx. 30 kg lighter).
Key features- Adjustable spreading width: synchronous-clutch spreading, tool-free change, range 50–200 mm (standard 150 mm bucket; optional dies: 100, 150, 200, 250, 300, 400, 450 mm).
- 100 kg double-barrel thermoplastic tank: two insulated stainless-steel barrels allowing one tank to reheat while the other dispenses; removable plug-in manual mixers.
- 48V lithium battery (15 AH): approx. 5 hours continuous marking per full charge; long standby retention (~24 hours).
- Drive speed 1–8 km/h; self-propelled operation reduces crew size (typical two-person operation).
- Adjustable glass bead spreader with 10 kg bead container to control reflectivity.
- Rear-wheel directional device for straight tracking on long runs and free turning on curves.
- Drum brake with adjustable tension.
Specifications- Spreading system: synchronous-clutch; speed-adjustable gear shift; single/double spreading selectable; marking range 50–200 mm.
- Glass bead container: 10 kg.
- Battery: 48V lithium, 15 AH.
- Drive speed: 1–8 km/h.
- Working duration: ~5 hours continuous marking per full charge; battery holds charge ~24 hours standby.
- Dimensions: YG-360S 1210 x 970 x 1070 mm; YG-380S 1200 x 970 x 1100 mm.
- Net weight: YG-360S ~130 kg; YG-380S ~100 kg.
- Brake: drum brake with adjustable tension.
Construction and components- Thermoplastic tank: double stainless-steel insulated barrels, total capacity ~100 kg, removable plug-in mixers.
- Heating system: gas or diesel burners that heat thermoplastic to typical melt temperatures (~180–220 °C).
- Manual mixer to maintain homogeneity of aggregate and binder.
- Marking bucket (shoe): standard 150 mm die, swappable to other widths.
- Glass bead container and adjustable bead spreader (10 kg box).
- Rear-wheel directional device for tracking and curve handling.
- Drive and brake: 48V lithium drive, 1–8 km/h, drum brake with adjustable tension.
Types and typical outputs- Hand-push type — for parking lots, yards and small roads; typical daily output ~300–800 m (lower cost).
- Self-propelled — suited for city streets and county roads; typical daily output ~1,500–2,500 m for a 150 mm line.
- Truck-mounted / driven — for highways and long roads; typical daily output ~3,000–5,000 m per day.
Case summaryProject example: repainting a 12 km national road. Replacing two hand-push units with one YG-380S paired with a preheater increased reported daily output (example: 3.5 km/day vs 1.8 km/day) and reduced schedule and material waste.
Technical specifications- Models: YG-360S, YG-380S.
- Thermoplastic tank capacity: 100 kg (double insulated stainless barrels).
- Marking width: adjustable 50–200 mm (standard 150 mm; optional up to 450 mm).
- Battery: 48V lithium, 15 AH (~5 hours continuous marking; ~24 hours standby).
- Drive speed: 1–8 km/h.
- Glass bead box: 10 kg; adjustable spreader.
- Dimensions: YG-360S 1210 x 970 x 1070 mm; YG-380S 1200 x 970 x 1100 mm.
- Net weight: YG-360S ~130 kg; YG-380S ~100 kg.
- Brake: adjustable drum brake.