O-ring seal WDI seriesNBREPDMFKM
Add to favorites
Compare this product
Characteristics
- Type
- O-ring
- Material
- NBR, EPDM, FKM
- Application
- profile, shaft
- Temperature limit
Min.: -30 °C
(-22 °F)Max.: 120 °C
(248 °F)- Pressure limit
80 bar
(1,160.3 psi)- Diameter
Min.: 15 mm
(0.591 in)Max.: 200 mm
(7.874 in)- Outer diameter
100 mm
(3.937 in)- Shore A hardness
40 unit
- Speed
0.5 m/s
(1.6 ft/s)
Description
The HUNGER shaft seal type WDI is applied as a
sealing element for permanently rotating shafts and
is capable of sealing on both sides.
Due to the use of special materials and an optimum
seal profile it can be used for speeds up to 0.8 m/s.
The gap size should not be more than 0.2 mm.
The surface finish of the sliding surface should be
Ra 0.1 - 0.3 μm.
Depending on the specifications and operating conditions
it is recommended to have the running surface
hardened to approx. 56 HRC or hard chromium plated.
Catalogs
WDI
3 Pages
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.