ANEMO4403 RELAY-ALARM is a wind speed sensor equipped with a relay output that is activate when the wind reaches a preconfigurated speed.
ANEMO4403 RELAY-ALARM has been designed to be used in industrial applications:
- Solar panels
- Wind turbines
- Weather stations
- Irrigation systems
The anemometer consists of a plastic rotor impact-resistant and to UV rays, at low temperatures and hail.
Rotating on ball bearings, drives a magnetic contact, generating 4 pulses per revolution.
- Material PA+FV
- Bearings Stainless steel X65Cr13
- Connection type 20m cable (4x0,75 mm2)
- Weight 150g (without cable)
- Storage temperature -35°C +80°C
- Working Temperature -20°C +70°C
Up to 180 km/h of wind speed. Output activation: After a second of wind speed over the set value. Output deactivation: Wind speed 1km/h below the set value. Minimum duration of the output pulse: 5 seconds. The output is not latched
- Power supply 12...24 Vdc
- Maximum power consuption <1W
- Output type relay contact (NO dry contact)
- Contact type 8A 250 Vac
- Range 3-180 Km/h
- Starting speed 8 Km/h
- Survival speed 200 Km/h
- Accuracy 1 Km/h (3-15 km/h) 3% (15-180 Km/h)
- IP65 (UNE 20324:1993)
- IP54 (UNE 20324:1993)
- EN 61000-6-2:2001
- EN 55022:2001 Class B
Stainless Steel Bracket
The stainless steel bracket is an optional item. The simple shape simplifies the installation and anchor of anemometer.
At the bottom, an open slot facilitates the pre-wired for cable entry.