High-pressure lubrication paste with PTFE for the lubrication of sliding machine elements made of metal, plastic and ceramic.
Areas of application
Lubricating and sealing off tap cocks, labyrinth seals, stuffing boxes and packings
Lubricating and sealing off fittings made of metal, plastic and ceramic, e.g. drain, cold- and hot-water fittings
Long-term lubrication of heavily loaded press and guide plates, for example on telescope booms of mobile cranes
As a lubricant for of threaded spindles on radiator thermostats
Advantages and benefits
Reduces wear
Extension of the relubrication intervals
High resistance to oxidation
Noise and vibration-damping
Resistant to cold and hot water, water vapour, lactic, formic, acetic and fruit acid, as well as alkaline and acidic cleaning agents and disinfectants
Good elastomer and plastic compatibility
Technical specifications
lower operating temperature: -20 °C
upper operating temperature: 150 °C
four-ball test rig welding load: 2,200 N
Applications
For optimum adhesion, clean contamination and other lubricants from slide surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply sufficient paste evenly with a brush, spatula, etc. The paste will also act as a sealant. Do not use paste instead of grease and mix only with suitable lubricants.
Industries
No matter what industry you come from, we at OKS have the right solution for you.