Water sampler

Snap Sampler The Snap Sampler® dedicated passive sampling system is the easiest way to collect samples for VOCs, SVOCs, PFAS metals and more. The Snap Sampler system has several advantages over other passive and no-purge sampling devices. Unlike passive diffusion bags that are limited to sampling for a small set of volatile organic compounds (VOCs), the Snap Sampler system collects a whole water sample that can be analyzed for any parameter – VOCs, SVOCs, metals other inorganic parameters, pesticides and nutrients. The sample accuracy and precision surpasses that of no-purge sampling devices that can cause low VOC recovery and suffer from elevated sample turbidity that can bias sample results. The Snap Sampler® dedicated passive sampling system is the easiest way to collect samples for VOCs, SVOCs, PFAS metals and more. There are two models of Snap Sampler modules – one holds the 40 mL VOA bottles and the other holds either a 125, 250 or 350 mL plastic bottle. Up to six modules can be connected in any combination to fit the testing requirements for that well. There are two triggering systems--a manual trigger and a pneumatic trigger--that deploy the Snap Sampler modules to the desired sampling depth within the well screen interval. There’s no depth limitation with the Snap Sampler system - samples have been collected at depths greater than 2,000 feet (600 m). Deep sampling, low yield wells and short water column wells are especially good candidates for the Snap Sampler, but any well greater than 2" in diameter is a potential candidate. Key Specifications Faster sampling with no purging Perfect for most wells- as low as 7 feet (2.1 m) to over 2000 feet (600 m)