RF transceiver module RC-CC1310F-915

multi-channelprogrammabledata

The RC-CC1310F-XXX module is based on Texas Instruments CC1310F128 component plus a 16Mbit serial flash memory. This device combines a flexible, very low power RF transceiver with a powerful 48 MHz Cortex M3 microcontroller in a platform supporting multiple physical layers and RF standards. Compared to the standard module (RC-CC1310-XXX), the "F" version has on board a 16M-bit serial flash memory (GD25Q16CEIG), programmable through SPI interface already cabled inside. The external flash can be used for: - To store and collect data. - Memorize images which at boot time can be loaded into internal flash using a boot image manager. There is an application developed on this module (free to use for everyone) where you can verify and download the source in C: https://github.com/joembedded/JesFs. Technical Characteristics: - Supply Voltage: 2.70 to 3.80 Volt - Current Consumption (RX mode): 5.50 mA - Current Consumption (TX Mode +10dBm): 13.40 mA - Current Consumption (TX Mode +14dBm): 23.50 mA - Current Consumption Stand by Mode: 0.70 µA - Current Consumption Shut Down Mode: 185 nA - Frequency Band: 915 MHz - Frequency Error: ±10 ppm - RF Output Power: -10 to +14 dBm - RF Sensitivity (Data Rate 50kbps): -110 dBm - Long Range RF Sensitivity (Data Rate 625bps): -124 dBm - Data Rate: 0.01 to 4.0 Mbit/s - Operating Range Temperature: -30 to 75 °C. Pinout: - 1: GND - Ground - 2: DIO-1 - GPIO, Sensor Controller, High Drive capability - 3: DIO-2 - GPIO, Sensor Controller, High Drive capability - 4: DIO-3 - GPIO, Sensor Controller, High Drive capability - 5: DIO-4 - GPIO, Sensor Controller, High Drive capability - 6: DIO-5 - GPIO, Sensor Controller, High Drive capability - 7: DIO-6 - GPIO, Sensor Controller, High Drive capability - 8: DIO-7 - GPIO, Sensor Controller, High Drive capability - 9: GND - Ground - 10: VDD - Power Supply - 11-13: Not Used - 14: DIO-11 - GPIO - 15: DIO-12 - GPIO - 16: DIO-13 - GPIO - 17: DIO-14 - GPIO - 18: DIO-15 - GPIO - 19: TMSC - GPIO, JTAG TMSC, High Drive capability - 20: TCKC - GPIO, JTAG TCKC, High Drive capability - 21: DIO-16 - GPIO, JTAG TDO, High Drive capability - 22: DIO-17 - GPIO, JTAG TDI, High Drive capability - 23: DIO-18 - GPIO - 24: DIO-19 - GPIO - 25: Not Used - 26: DIO-21 - GPIO - 27: DIO-22 - GPIO - 28: RST - RESET Active Low - 29: DIO-23 - GPIO - 30: DIO-24 - GPIO - 31: DIO-25 - GPIO - 32: DIO-26 - GPIO - 33: DIO-27 - GPIO - 34: DIO-28 - GPIO - 35: DIO-29 - GPIO - 36: DIO-30 - GPIO - 37: GND - Ground - 38: ANT - Antenna Pad - 39: GND - Ground. Model: RC-CC1310F-915 - Based on Texas Instruments CC1310F128 - 16Mbit serial flash memory (GD25Q16CEIG) - 48 MHz Cortex M3 microcontroller - Frequency Band: 915 MHz - RF Output Power: -10 to +14 dBm - RF Sensitivity: up to -124 dBm - Operating Temperature: -30°C to 75°C - Data Rate: 0.01 to 4.0 Mbit/s - Dimensions: see mechanical drawing.