1. Machine-tools
  2. Cutting Tool
  3. Carbide core drill
  4. RUKO GmbH Präzisionswerkzeuge

Tungsten carbide core drill 1087 series
Weldon

tungsten carbide core drill
tungsten carbide core drill
tungsten carbide core drill
Add to favorites
Compare this product
 

Characteristics

Material
tungsten carbide
Other characteristics
Weldon
Diameter

Max.: 50 mm
(1.97 in)

Min.: 12 mm
(0.47 in)

Length

84 mm
(3.31 in)

Description

The RUKO core drills with Tecrona coating and hard metal cutting edges can be universally used in non-hardened steels and super alloys (materials with very high alloy percentages of Al,Ti, nickel like inconel, hastelloy, Inox, etc.). The Tecrona coating is the ideal coating for all drilling works that stress the tool extremely. It adheres very well to the tool, where by the wear-resistant coating increases the surface hardness to approximately 4200 HV. The coefficient of friction is extremely low in this coating, thereby increasing the service life with low wear. Net weight 0.145 kg Cutting depth 50.0 mm Technical data Coating - Tecrona coating Cutting direction - right hand cutting Material - TC Application areas Main application - Bronze Cast iron Plastics Brass Stainless steel Steel < 900 N/mm² Steel < 1100 N/mm² Steel < 1300 N/mm² Steel < 800 N/mm² Steel < 1000 N/mm² Steel < 1200 N/mm² Titanium alloyed Aluminium

Catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.