Wall-mounted fan HTMV seriesaxialextraction230VAC
Add to favorites
Compare this product
Characteristics
- Installation
- wall-mounted
- Configuration
- axial
- Function
- extraction
- Supply voltage
- 230VAC, 400 VAC, 690 V
- Drive mechanism
- with asynchronous motor
- Material
- stainless steel
- Other characteristics
- anti-corrosion, vertical, IP55, industrial
- Air flow
Min.: 10,150 m³/h
(358,443.867 ft³/h)Max.: 118,400 m³/h
(4,181,256.54 ft³/h)- Rotational speed
Min.: 900 rpm
(5,655 rad.min-1)Max.: 1,480 rpm
(9,299 rad.min-1)- Noise level
Min.: 48 dB
Max.: 83 dB
Description
Roof mounted axial extract fans with vertical air outlets
Roof mounted axial extract fans with vertical air outlet, designed for extracting large air volumes in industrial or similar premises.
Fan:
• Support base in galvanized steel sheet and anti-corrosive treatment.
• Adjustable cast aluminum impeller.
• Protection grid against contacts according to UNE-EN ISO 12499.
• Non-return damper in aluminum sheet to prevent the entry of water when the fan is not running.
• Airflow direction from motor to impeller.
Motor:
• Class F motors with ball bearings and IP55 protection.
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
• Working temperature: -25 ºC +40 ºC.
Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
• Fans with 2 speed motor.
• 2 and 8 pole fans according to diameter.
• Special windings for different voltages and frequencies.
• Total stainless steel construction.
• Hot dip galvanized steel construction.
Catalogs
No catalogs are available for this product.
See all of SODECA‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.