- Robotics - Automation - Industrial IT >
- Automation >
- Analog I/O >
- ADEPT TECHNOLOGY
ADEPT TECHNOLOGY analog I/O
... xtremeDB -1 (pronounced: "dash one") CANopen module combines many different I/O signal configurations. It offers a total of eight inputs, up to four of which can be parameterized in analog mode. Two of ...
Data Panel GmbH
The xtremeBLOCK CANopen module combines many different I/O signal configurations. It offers a total of 12 inputs, eight of which can be parameterized as analog. The remaining four digital inputs can also ...
Data Panel GmbH
... -1 (pronounced: "dash one") SAE J1939 module combines many different I/O signal configurations. It offers a total of eight inputs, up to four of which can be parameterized in analog. Two of the digital ...
Data Panel GmbH
... module to be plugged into a Pageant BA3101 Ex ia intrinsically safe Operator Display Product details The BA3301 Pageant Analogue Input module has four individually isolated unpowered 4/20mA passive inputs. Separate ...
BEKA
... (discrete I/O, analog I/O, counters, etc). Thanks to its high performance, the FIO remote I/O module is ideally suited for high-speed and scalable machines. Modular ...
... supply high-performance and quality data acquisition modules, which are also called distributed IO modules, IO modules, data acquisition cards, data loggers, and IO cards. FEATURES ...
BRAINCHILD ELECTRONIC CO., LTD
... connection: Central, using local I/O bus of CPU module. Up to ten I/O modules can be connected to the CPU. Decentralized periphery via fieldbus between CPU module and remote I/O ...
ABB Automation Products GmbH
I-7000 and M-7000 remote I/O modules provide cost-effective protection and conditioning for a wide range of valuable industrial control system. The product line includes sensor-tocomputer, computer-to-sensor, digital ...
ICP-DAS
... mA input signals connected to the universal analog input. It is also capable acquire up to 3 digital inputs and to drive one solid-state relay and two SPST relays and is available with a second V/mA analog ...
DATEXEL SRL
... standard RS-232 or RS-422/485 protocols Hot swappability Single point I/O, dual point I/O, and I/O blocks as well as high density fixed I/O schemes Smart ...
... provides a single channel of analog input which is filtered, isolated, amplified, and converted to a high-level analog voltage output. This voltage output is logic-switch controlled, allowing these modules ...
Dataforth Corporation
... provides a single channel of analog input which is filtered, isolated, amplified, and converted to a high-level analog voltage output. This voltage output is logic-switch controlled, allowing these modules ...
Dataforth Corporation
... provides a single channel of analog input which is filtered, isolated, amplified, and converted to a high-level analog voltage output. This voltage output is logic-switch controlled, allowing these modules ...
Dataforth Corporation
... suite of 17 E3 I/O modules offer up to 34 mixed I/O points to meet varying requirements. Add high-density I/O to our award-winning Graphite® HMIs or deploy in remote stand-alone applications. Connectivity: ...
Red Lion's Sixnet series EtherTRAK®-2 Ethernet enabled I/O modules provide simple and secure remote monitoring for deployments in harsh environments. EtherTRAK-2 offers a low cost per I/O point and rugged ...
Number of in- and outputs: 12 (analog und digital) Resolution: input 16 Bit, output 14 Bit Input voltage: to ±10 mV Input current: 0(4) .. 20 mA Digital input 24 V Digital 32-bit counter ...
BACHMANN
... safety. All of the I/O module’s transmission channels are conductively connected to each other. The ANTARES 8AI Remote I/O Module is operated by and supplied with power by the ANTARES Rail Control Unit ...
BARTEC
CEDIO-P 24/24/2 With 48 digital I/O and 2 analog outputs on board it is the controller with highest I/O packing density.
... Build in Analog Inputs Input Impedance - PT-100 0/4-20mA 0-10V 0-50mV -200oC-650oC 100ohm >6.6kohm >10Mohm Galvanic Isolation - None Resolution - 14 Bit Accuracy - ±0,25% Sampling Time - 250 ms Status Indication ...
... RS-485 Program Installation/Configuration - 1x USB (Mini USB2.0) Inputs - 2x or 4x (Pt-100, Pt-1000, PTC, NTC, 0…50mV) ADC Resolution - 15 bit Measuring Speed - Per Channel 160msn Outputs - 4x (NO) Relay Output ...
Multi-Function I/O Module ● 4 Channels Analog input ● 2 Channels Analog output ● 4 Channels Digital input ● 4 Channels Digital output ● All Digital input channels ...
8 Channels Differential Analog Input I/O Module ● 8 Channels differential Analog input ● Support voltage, current, thermocouple input ● Support over voltage protection ● Support ...
... Isolated Analog Input EtherCAT Slave I/O Module ● Standard EtherCAT Slave ● 8 Channels differential Analog Input ● 2 x RJ45 Ethernet Interface ● Support Daisy Chain connection ● ...
> Inputs: 8 PNP, 24V 20mA > Outputs: 4 PNP, 24V 0.8A > Temperatures: the correct functionality of the node has been verified in a temperature range between 0 and 70 ° C > Power supply: 24V (18-36V) - 0.5Adc > Electrical Insulation: ...
ELCO Elettronica di A. Ligabue e C. snc
> Inputs: 4 PNP, 24V 20mA > Outputs: 8 PNP, 24V 0.8A > Temperatures: the correct functionality of the node has been verified in a temperature range between 0 and 70 ° C > Power supply: 24Vdc (18-36V) - 0.5Adc > Electrical Insulation: ...
ELCO Elettronica di A. Ligabue e C. snc
> Inputs: 12 PNP, 24V 20mA > Temperatures: the correct functionality of the node has been verified in a temperature range between 0 and 70 ° C > Power supply: 2V (18-36V) - 0.5Adc > Electrical Insulation: the inputs, outputs, and communication ...
ELCO Elettronica di A. Ligabue e C. snc
The 2-channel analog output module is suitable for connection of analog actuators for voltage and current outputs in the range up to ±10 V or ±20 mA. Output module analog for 300s ...
The TBSPT8-DR is a precision 8 – channel PT100/PT1000 interface. Measurement and configuration is controlled via SDI-12 commands. The interface is equipped with 4-wire inputs, matched noise filters, surge- and over voltage protection. To ...
ZLAN6002 Remote IO Controller is an intelligent device developed by Shanghai ZLAN of digital input output and analog quantity input based on RS485. The remote IO controller can conveniently ...
Shanghai ZLAN Information Technology Co.,Ltd
ZLAN6042 Remote IO Controller is an intelligent device developed by Shanghai ZLAN of digital input output and analog quantity input based on Ethernet or RS485. The remote IO controller ...
Shanghai ZLAN Information Technology Co.,Ltd
ZLAN6802 is 8 channels remote IO controller launched by Shanghai ZLAN after ZLAN6042. The controlled channels from 4 channels of 6042 extending to 8 channels, including 8 channels Digital Input(DI), Digital Output(DO), ...
Shanghai ZLAN Information Technology Co.,Ltd
The mezzanine card M36N is a 16-bit analog M-Module for a wide range of standard input requirements such as 16 channels single-ended voltage or current and 8 channels differential voltage or current. The isolated supply ...
MEN Mikro Elektronik
... contains a versatile set of I/O channels and a Ethernet interface with different communcation stacks: 32 bit controller 4 digital in/out channels 16 digital input channels (6 digital inputs optionally used as code ...
MEN Mikro Elektronik
... The analog inputs can be used for voltage (±10 V), current (±20 mA) or resistive measure-ments (10Ω…5kΩ). All I/O channels, digital and analog, are galvanically isolated from the internal ...
MEN Mikro Elektronik
... piece of technology that enables digital measurements for all analogue products with a 4-20mA output, an industry standard. The Input Module offers limitless possibilities, as all analogue equipment ...
... piece of technology that enables digital measurements for all analogue products with a 0-10V output, an industry standard. The Input Module offers limitless possibilities, as all analogue equipment with ...
108-A204 is a 4-Channel Analog Output Motionnet® slave module. The transfer rate is up to Max. 20Mbps. With CAT5 cable, 108-A204 can be connected serially. Features ● 4-Ch. Analog Output ...
Taiwan Pulse Motion
... is an 8-Channel Analog Input and 4-Channel Analog Output Motionnet® slave module. The transfer rate is up to Max. 20Mbps. With CAT5 cable, 106-A180-01 can be connected serially. Features ● ...
Taiwan Pulse Motion
Features ● 8-Ch. Analog Input and 4-Ch. Analog Output Motionnet® slave modules ● Max. 20Mbps transfer rate ● Easy installation with RJ45 phone jack and LED diagnosis ● Connectors ...
Taiwan Pulse Motion
... Cscape SmartRail based I/O is a modular I/O system for Horner OCS supporting Ethernet, CsCAN and CANopen based protocols. It is a flexible I/O system that can be applied as a local ...
TCW241 is an Ethernet IO module, the right choice for factory automation and distributed process control. TCW241 is an Ethernet IO module with Modbus TCP/IP support. It is intended to use for general ...
Teracom
TCW280 is an Ethernet analog output module with galvanically isolated ports. Analog output module supports two channels with voltage or current loop modes. The channel mode is WEB interface ...
Teracom
TCW122B-CM is a remote IO module with SNMP v1 support. It is dedicated to remote environmental monitoring and control. TCW122B-CM is a remote IO module for environmental monitoring and control, designed ...
Teracom
Seven Millivolt modules enable the XR440 Data Logger to accept a millivolt signal on channel 3. Three modules (Mvt-11b, Mvt-22b, Mvt-50u) accept a thermocouple (Type J, K, N, R, S, T, B, C, or E). A built-in, precision thermistor on channel ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining