- Hydraulics - Pneumatics >
- Pump >
- Electric pump >
- AMETEK
AMETEK electric pumps
Flow: 0 l/min - 2.1 l/min
Pressure: 0 mbar - 400 mbar
Fluid temperature: -25 °C - 55 °C
... range of -25 to 55 °C, with this unique set of features Disc Pump enables advances across a broad spectrum of Gas Sampling, Detection, Monitoring and Analysis applications. All of our pump designs ...
Flow: 0 l/min - 1.65 l/min
Pressure: 0 mbar - 300 mbar
Fluid temperature: 5 °C - 40 °C
... Micropump The BL Series Disc Pump, low cost micropump strikes a balance between performance and cost. Like all Disc Pumps, the Disc Pump combines silent operation, pulsation-free flow, ...
Flow: 0 l/min - 1.2 l/min
Pressure: 270 mbar
Fluid temperature: -25 °C - 40 °C
... Series Disc Pump – long lifetime micropump has been optimised for long service life, delivering in excess of 5,000 hours continuous operation under the most demanding conditions. Over 5,000 hours, cycling 20,000 times ...
Flow: 0 m³/h - 90 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 250 °C
... coupled internal gear pump for ultimate protection against leakage ED is for Environmental Duty. As only minimal maintenance is necessary, ED pumps will be a very economical solution compared with ...
DESMI Pumping Technology A/S
Flow: 50 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 150 °C
Simple and compact construction for non-abrasive liquids General Purpose Internal gear pumps in cast iron, for clean, non-abrasive liquids. The simple and compact construction makes ...
DESMI Pumping Technology A/S
Flow: 120, 100 m³/h
Pressure: 30 bar
Head: 65 m
... centrifugal pump designed for high media temperatures for boiler water application and district heating applications up to 180°C. Concept Features: • Duplex stainless steel shaft. • Closed impeller design to achieve ...
DESMI Pumping Technology A/S
Flow: 8 l/min - 13.4 l/min
Pressure: 90 bar - 172 bar
Power: 2.2 kW - 4 kW
Brass Head Forged Bronze Connecting Rods with Lifetime Warranty Hardened Stainless Steel Piston Guides High Efficiency Stainless Steel Check Valves Abrasion Proof, Heat Resistant, Industrial Ceramic Plungers High Quality Buna- Textile ...
COMET Spa
Flow: 0.35 m³/h
Power: 10 W
Fluid temperature: 80 °C
Ideal for the filtration of small volumes on standard cartridges (extruded or wound). Excellent chemical resistance Available in polypropylene or PVDF, this filter is resistant to both acids and bases. Long-lasting ...
Siebec
Flow: 0.38 m³/h
Power: 10 W
Fluid temperature: 80 °C
Ideal for the filtration of small volumes on standard cartridges (extruded or wound). Excellent chemical resistance Available in polypropylene or PVDF, this filter is resistant to both acids and bases. Long-lasting ...
Siebec
Flow: 1.5 m³/h - 4 m³/h
Power: 180 W
Fluid temperature: 110 °C
... strong plastic welding method eliminates the need for gaskets, eliminating the risk of leakage. Pump Protection The filter holder protects the pump from splashes of potentially corrosive fluids, ...
Siebec
Flow: 160, 200 m³/h
Head: 0 m - 30 m
Power: 16.1, 20.2, 28.4 kW
Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% ...
DRAGFLOW
Flow: 0 m³/h - 150 m³/h
Head: 0 m - 39 m
Power: 12.8, 10.4, 15.2 kW
Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% ...
DRAGFLOW
Flow: 0 m³/h - 150 m³/h
Head: 0 m - 22 m
Power: 8.7, 12.8 kW
... High depth kit Algae cutting blade Humidity and temperature sensor Jet Ring system Electric pumps are available in 50Hz and 60Hz versions. Pumps are CE certified. UL/CSA certification ...
DRAGFLOW
Flow: 0.3 m³/h - 9.6 m³/h
Pressure: 6, 10 bar
Head: 16.5 m - 68 m
... self-priming centrifugal pump equipped with Venturi unit (ejector and diffuser) in PPE + PS reinforced with glass fibres. Practical, easy to use and easily transportable thanks to its low weight. The AGA-AGC self-priming ...
EBARA PUMPS EUROPE
Flow: 0.85 l/min
Pressure: 2 bar
Head: 20 m
KNF diaphragm liquid pumps combine maximum performance with minimum size. The use of chemically resistant materials enables the pumps to convey virtually any type of liquid, whether neutral or corrosive. ...
KNF NEUBERGER
Flow: 0.00001 l/min - 0.861 l/min
This peristaltic pump is ideal for the simple conveying of all media. The pump drive of this model makes it possible to switch between a single channel and multi-channel ...
Heidolph Instruments GmbH & Co. KG
Flow: 0.004 l/min - 0.00415 l/min
This pump of the Hei-Flow Core series is particularly suitable when high volumes need to be transported easily. A flow rate of 4.0 - 4,151 ml / min can be set for this purpose. This model is designed for the use of single-channel ...
Heidolph Instruments GmbH & Co. KG
Flow: 0.00001 l/min - 0.00081 l/min
The pump drive of the model 120 of the Hei-FLOW Expert series can be operated with either single-channel or multi-channel pump heads. The flow rates with single-channel pump ...
Heidolph Instruments GmbH & Co. KG
Flow: 4.5 l/min - 5 l/min
Pressure: 9 bar
Head: 2.5 m
electric pump and 3 m outlet and suction hose and accessories: delivery gun, meter, suction accessories (depending on the model).
SAMOA Industrial, S.A.
Flow: 10, 11, 13 l/min
Pressure: 0 bar - 15 bar
Power: 780, 600 W
Internal gear electric pumps for lubricants.motor depending on model, IP-55 protection and on/off switch. Cast iron pump body, sintered steel gears and by-pass valve. Motor ...
SAMOA Industrial, S.A.
Flow: 32, 30 l/min
Pressure: 1.6 bar
Power: 260 kW - 500 kW
Multi-diaphragm pumps with no mechanical seals designed for dispensing AdBlue®/DEF. Pumps are self priming and have a by-pass valve. Electric motors have IP55 protection and include on/off ...
SAMOA Industrial, S.A.
Pressure: 10,000 psi
... 10,000psi ultra high performance pumps has been designed and developed specifically for use with hydraulic torque wrenches. Pumps operate from two primary power sources: air and electric, ...
Hydratight
Flow: 7.6, 4.3, 2.6, 4.1, 7.1 l/min
Pressure: 500 bar - 4,136 bar
Power: 11, 75, 37, 22, 30 kW
... is a configurable designed water jet pump that can be custom built based on a variety of options to meet your cutting solution requirements. From the basic model to the fully loaded, the result is a waterjet pump ...
Pressure: 3,800 bar
... pressure of 4,136 bar, KMT WATERJET SYSTEMS offers the STREAMLINE SL-VI STD high pressure pump as a lower priced alternative still featuring KMT's advanced pump technology. The STD models can be operated ...
Pressure: 3,800 bar
... The NEOLINE pump has been developed with the aim of creating a robust, easy to operate pump. It is driven by a 40 hp (29 kW) three-phase motor which is equipped with vibration isolation ...
Flow: 0.1 us gal/min - 1,050 us gal/min
Pressure: 15 psi - 600 psi
Power: 0.5 ch - 5 ch
Mag Drive series are the first progressing cavity wobble stator pumps to offer magnetic drives. The proprietary, magnetic coupling design performs well in hazardous applications and is effective with ...
NOV Inc.
Flow: 0 us gal/min - 990 us gal/min
Pressure: 0 psi - 350 psi
Fluid temperature: 14 °F - 212 °F
Compact C Pump delivers reliable performance to the maximum duty requirements of your application in a compact package. Features include suction lift capability up to 28 feet, positive ...
NOV Inc.
Flow: 0 us gal/min - 4,500 us gal/min
Pressure: 0 psi - 1,500 psi
Fluid temperature: 14 °F - 230 °F
... changing pump arrangement to match the width of the TSF opening to the drop zone • Concentric rotation in a close tolerance pressure tube allows the TSF to generate positive stuffing pressure to the pump ...
NOV Inc.
Flow: 900 l/min
Head: 12, 27, 40 m
Power: 5 kW - 12.6 kW
Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the ...
Brinkmann Pumpen
Flow: 0 l/min - 870 l/min
Head: 0 m - 62 m
Power: 3.3 kW - 10.3 kW
Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps ...
Brinkmann Pumpen
Flow: 10 l/min
Head: 28 m - 140 m
Power: 0.48 kW - 1.75 kW
Immersion Pumps Our multistage pump models (S)TC25...(S)TC460 have been especially developed to supply internally cooled tools with coolant fluid. Closed impellers provide optimal hydraulic efficiencies ...
Brinkmann Pumpen
Flow: 0.5 l/min - 5.7 l/min
Pressure: 0 bar - 120 bar
Power: 0.06 kW - 1.46 kW
... decisive for the quality of the end product. The KF 0 stainless steel gear pump is particularly suitable for these applications. The KF 0 stainless steel is an external gear pump with flow rates of 1 ...
Flow: 0 m³/s - 0.27778 m³/s
Pressure: 0 bar - 10 bar
Head: 0 µm - 75,000,000 µm
... features are: Pump casing designed with open spiral ring to pump liquids containing solid particles and to avoid air bubble formation. The casing of RCN - RCNS series pumps ...
ROBUSCHI
Flow: 0.001 l/min - 0.2 l/min
Pressure: 210 bar
... system (third pump for ternary). Solvent selection on each pump with addition of four-solvent valve (up to eight solvents) - Ability to operate additional pumps in parallel to double ...
Flow: 0 l/h - 23 l/h
Pressure: 8, 5 bar
... Dura 5 peristaltic pump for high pressure low volume. Verderflex Dura The innovative hose pump is highly compact and easy to maintain. Its unique design reduces the footprint by ...
Verder Liquids
Flow: 0 l/h - 39 l/h
Pressure: 5, 8 bar
... 7 peristaltic pump for dosing and low flow applications Verderflex Dura The innovative hose pump is highly compact and easy to maintain. Its unique design reduces the footprint ...
Verder Liquids
Flow: 0 l/h - 222 l/h
Pressure: 6, 12 bar
... 10 peristaltic pump for dosing and low flow applications Verderflex Dura The innovative hose pump is highly compact and easy to maintain. Its unique design reduces the footprint ...
Verder Liquids
Flow: 5.4 l/min
Power: 100 W
... The connection technology of the pump head is designed for fast handling. The range of rotarus® products encompasses a comprehensive selection of single and multichannel peristaltic pump heads or piston ...
Hirschmann Laborgeräte GmbH & Co. KG
Flow: 10 l/min - 350 l/min
Power: 30 W
... The range of rotarus® products encompasses a comprehensive selection of single and multichannel peristaltic pump heads or piston pump heads. Pump heads from other manufacturers can also ...
Hirschmann Laborgeräte GmbH & Co. KG
Flow: 5.4 l/min
Power: 100 W
... touchscreen control unit. The pump head linking technology has quick handling assurance. The range of rotarus® products encompasses a comprehensive selection of single and multichannel peristaltic pump ...
Hirschmann Laborgeräte GmbH & Co. KG
Flow: 5,000 l/h
Pressure: 2 bar - 2.5 bar
Power: 0.7 kW
... alkaline brass plating. TECHNICAL SPECIFICATIONS PUMP It is made of anticorrosive or highly protected materials to withstand acids and dangerous filtering-liquid components • Polypropylene (Moplen) pump ...
OMG sas di Gibogini Stefano e C
Flow: 25,000 l/h
Pressure: 2 bar - 2.5 bar
Power: 4 kW
... alkaline brass plating. TECHNICAL SPECIFICATIONS PUMP It is made of anticorrosive or highly protected materials to withstand acids and dangerous filtering-liquid components. • Polypropylene (Moplen) pump ...
OMG sas di Gibogini Stefano e C
Flow: 5,000 l/h
Pressure: 1.8 bar
Power: 0.7 kW
... bar): ca. 1,8-2 N.B. The filter pumps of the series CESE marked with the letter “M” are equipped with a magnetic entrainment pump, which is designed without mechanical seal. This constructional feature ...
OMG sas di Gibogini Stefano e C
Flow: 5 l/h - 8 l/h
Head: 2.5 m - 5 m
Servers & Data Center Liquid Cooling Pump Motor:bldc motor Application:High Density Server liquid cooling system Servers Liquid Cooling Pump Features: 1. DC brushless motor ...
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
Flow: 7, 12, 9 l/min
Head: 3, 5, 8 m
Fluid temperature: -40 °C - 100 °C
... Brushless DC 24V 12V Mini Water Pump Specification: voltage:12v or 24v flow rate: 7L/min 9L/min 12L/min water head:3M 5M 8M Feature: ◇Advanced magnetic driving technology for static-seal,without ...
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
Flow: 0 l/min - 6.5 l/min
Head: 2.5 m
Power: 5.16 kW
... brushless DC motor with long lifetime 20,000hours ●Heavy duty work,can sustain continuous 24hours work ●Special designed high efficiency closed-impeller for low power consumption ●Motor widely voltage designed suitable ...
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
Flow: 0.0012 l/min - 0.018 l/min
Pressure: 0 bar - 3 bar
Power: 8.9 W
Compact hermetic pump for continuous dosage The micro annular gear pump mzr-2961 is suitable for handling crystallizing, oxygen or moisture sensitive liquids, because ...
HNP Mikrosysteme GmbH
Flow: 0 l/min - 0.018 l/min
Pressure: 0 bar - 3 bar
Power: 6.4 W
Compact hermetic pump for diskrete dosage The micro annular gear pump mzr-2965 is suitable for handling crystallizing, oxygen or moisture sensitive liquids, because ...
HNP Mikrosysteme GmbH
Flow: 0.0001 l/min - 0.072 l/min
Pressure: 0 bar - 5 bar
Power: 6.4 W
Compact hermetic pump for discrete dosage The micro annular gear pump mzr-4665 is suitable for handling crystallizing, oxygen or moisture sensitive liquids, because ...
HNP Mikrosysteme GmbH
Flow: 0 m³/h - 27 m³/h
Head: 1 m - 20 m
Power: 0.12 kW - 4 kW
CTM MAGNETIC DRIVE PUMPS CTM is a compact close coupled pump perfect for service in little spaces like in OEM installations. Tapflo CTM magnetic drive ...
Tapflo
Flow: 10 m³/h
Pressure: 4 bar
LOW PRESSURE HOSE PUMPS Reduce maintenance downtime... Suitable for pumping and dosing low or high viscous, pasty, pure, neutral, aggressive or abrasive liquids, those containing gases or which tend to froth or those ...
Tapflo
Flow: 150 m³/h
Pressure: 15 bar
HIGH PRESSURE HOSE PUMPS The latest design PT pumps combine the best available materials with smart design solutions in order to maximise running time and minimise maintenance. The PT series pump ...
Tapflo
Flow: 0.1 m³/h - 36 m³/h
Head: 0.1 m - 12.2 m
Power: 0.01 kW - 0.56 kW
Construction Energy saving variable speed circulating pump driven by a permanent magnet synchronous motor (pm) controlled by on board inverter. Applications Heating and conditioning systems
Calpeda
Flow: 43 l/min
Power: 216 W
Length: 140 mm
Electric vane pump, 12 VDC and 24 VDC, selfpriming, for the transfer of diesel, with transport handle, ON-/OFF-switch and 2 m – cable with alligator clamps for battery connection.
Flow: 11 l/min
Pressure: 15 bar
Power: 0.55 kW
Electric, selfpriming gear pump for the supply of AdBlue®; guarantees a constant flow and a low noise level. Pump body in stainless steel AISI 304, gears in plastic. Protection category ...
Flow: 4, 3.4, 4.5, 3, 2.6 m³/h
Pressure: 7 bar
The C 30 series Neptune pneumatic water pump is an enhanced hose setup that generates 7 bar pressure rating. This system is mounted to a 5-meter hose which delivers the media into the pump. The compressed ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining