ARI-Armaturen water valves

Pressure: 17.2 bar

... can independently activate an actuator to open the deluge valve: a pneumatic Dry Pilot detection Line and/or an electric solenoid, connected to sensorst hrough a control panel. Once open, the valve reduces ...

DN: 40 mm - 250 mm
Pressure: 17.2 bar

... to flame heat. * Soft closing upon pressurization of the valve’s control chamber, by line pressure or other independent water source, prevents surges. The FDV is a Fire Protection control valve ...

DN: 40 mm - 250 mm
Pressure: 17.2 bar

... high flowrates with minimum head loss. * The valve trips open automatically upon a gradual release of water pressure from its control chamber. The valve is actuated by an electric signal ...

DN: 4 mm - 16 mm
Pressure: 0 MPa - 1 MPa
Temperature: -15 °C - 150 °C

Throttle (needle) Valve made of SUS316, which is highly resistant to corrosion. Best suitable for industries such as chemicals, medical care, semiconductor manufacturing, solar battery and secondary battery etc. All ...

DN: 6, 8, 4, 10, 12 mm
Pressure: 0 MPa - 1 MPa
Temperature: 0 °C - 120 °C

Not only the body but the release ring is made of brass, thus best suitable for high heat and spatter environments. It is compatible with special specifications. HNBR is used for seal material. FKM specification is also available ...

DN: 4, 12, 10, 8, 6 mm
Pressure: 0 MPa - 1 MPa
Temperature: 0 °C - 80 °C

PP (Polypropylene) is applied for the body material to adapt to clean environment. Easy to check sanitary condition. Clear (semitransparent) color used for the resin body makes it possible to check visually the fluid (liquid) inside. All ...

DN: 15, 20, 25 mm
Pressure: 16 bar
Temperature: -10 °C - 110 °C

2 way MM BRASS Diamant ball valve 2-way MM BRASS with caps and tangs Full bore PN16 Code - Size - DN - PN - KVS DC2A2A - 1/2" - 15 - 16 - 16,3 DC2B2A - 3/4" - 20 - 16 - 29,5 DC2C2A - 1" - 25 - 16 - 43

DN: 20 mm
Temperature: 5 °C - 50 °C

SINTESI motorised valve – 2 way MM BRASS HEATING / COOLING / SANITARY WATER ON-OFF functioning, with 1 extra free micro switch on opening 2 points control actuator with relay Class protection: IP54 Operating ...

DN: 15, 20, 25 mm
Pressure: 16 bar

SINTESI motorised valve – 2 way MF BRASS HEATING / COOLING / SANITARY WATER ON-OFF functioning, with 1 extra free micro switch on opening 2 points control actuator with relay Class protection: ...

DN: 15 mm - 65 mm
Pressure: 0 bar - 10.2 bar
Temperature: 0 °C - 180 °C

... proportional to the flow through the paraboüc contour of the piston. The valve shuts tight and is of anti-water hammer design. Media compressed air. vacuum up to 102 mbar or liquids ...

DN: 12, 7, 10, 8 mm
Pressure: 15 bar
Temperature: 0 °C - 90 °C

– Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Materials Brass housing (Ms58), nickel-plated Ball made of brass (Ms58), chrome-plated Handle ...

DN: 8 mm - 50 mm
Pressure: 25 bar - 50 bar
Temperature: -20 °C - 150 °C

... applications – Mini ball valves also with plug connection Operating pressure See table Materials Handle made of steel, nickel-plated and painted Handle made of steel, coated series 20, 21, 30, 31, DVGW series ...

DN: 10 mm - 45 mm
Pressure: 0 bar - 60 bar
Temperature: -20 °C - 220 °C

– Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Ball valve up to max. 60 bar Actuation up to max. 8.4 bar Materials Brass ...

DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

... resistant against aggressive water 10 year warranty maintenance-free shaft sealing with self-lubricating EPDM lip gasket, replaceable under pressure up to DN 80 EPDM-seat gasket cone rotatable, protected ...

DN: 8, 10 mm
Pressure: 16 bar
Temperature: 0 °C - 90 °C

... triangular key against unauthorised removal of water valve body and sampling pipe can be rotated 360° PTFE seat gasket can be attached to all Kemper valves with test/drain-port ...

DN: 50 mm - 1,500 mm
Pressure: 16 bar - 420 bar
Temperature: -46 °C - 200 °C

Floating Ball Valve soft seated Athena cast steel ball valve - Mainly designed for low-pressure services with a flexible temperature range. - Provides a wide variety of this series of ball valves ...

DN: 50 mm - 900 mm
Pressure: 16 bar - 250 bar

... Entry ball valve body material: Carbon steel /Stainless steel / Alloy steel /Special ( Monel /Inconel /Hastelly etc.) end connection: RF/RTJ/BW operation:Lever Gear motor/pneumatic actuators product overview:Athena ...

DN: 50 mm - 1,400 mm
Pressure: 16 bar - 420 bar

... soft-seated trunnion mounted ball valves are designed according to API6D standard and be offered two-piece and three-piece split body designs. The valves can be applied in wide pressure and temperature ...

DN: 0.5 in - 2 in
Pressure: 3.5 bar - 7 bar
Temperature: -10 °C - 180 °C

... Body Material - SS ASTM A351 Grade CF8 / CF8M Seal - TEFLON / VITON / EPDM / SILICON Media Steam, Air, Water, Chemical, Gases, Oil, Diesel, Hot Water Cover SS304 Plate Aluminum Die-Cast Working ...

DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 8 bar
Temperature: -10 °C - 180 °C

Angle Seat Valve with Plastic Operator (NC/NO/Double Acting) > Port: - Refer below technical data sheet (Available BSP / NPT) > End Connection: - Screwed / Flange / Tri-Clamp > Body Material: - SS ASTM A351 Grade ...

DN: 40 mm - 300 mm

... leakage butterfly valve. Accurate dual stem sealing prevents leakage. Design Standard: ISO 5211, API 609, ASME B16.5 150#^ Operator : Hand Lever / Gear / Actuator ISO Pad for mounting, Gear Operator / Actuator The ...

Pressure: 0 psi - 29 psi
Temperature: 5 °C - 60 °C

• Compact series lineup that is perfect for small flow volume control of chemicals. Differential screw flow rate adjustment option can be selected for micro flow rate adjustment.

DN: 0.5 in - 6 in
Pressure: 1 bar - 13 bar
Temperature: -15 °C - 180 °C

Model RET-DS / REF-DS are the Direct Acting Pressure Reducing Valve designed with Duplex Stainless Steel material providng more options for different industries. Pressure Reducing Valve protecting the ...

DN: 1.5 mm - 56 mm
Pressure: 0 psi - 142.2 psi
Temperature: -15 °C - 80 °C

... / BFF, The float valve has one major function and that is to stop the flow of water from an inlet supply line. The float valve rises as the water level rises. Once a ...

DN: 1.5 in - 56 in
Pressure: 0.3 psi - 8 psi
Temperature: -15 °C - 80 °C

... Presssure Sustaining Valve, also known as Back Pressure Valve, or Back Pressure Sustaining Valve, is a valve that maintain required pressure of inlet port by opening ...

DN: 25 mm - 300 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 120 °C

304 SS Presentation Dampers Butterfly Valves Presenting Double Flange Damper Butterfly Valve Practical examples: • Process-gas cleaning in a foundry • Waste air purification in chemical / pharmaceutical ...

... pressure, the ceramic valve shows its excellent performance. Ceramic valves can meet the high wear and strong corrosion environment, especially the outstanding feature is the long service life, the performance-price ...

DN: 25 mm - 300 mm
Pressure: 2 bar - 8 bar
Temperature: -50 °C - 120 °C

... Butterfly Valve Air Operated For Marine Industry Structure - rack and pinion rotary actuator Surface Treatment - hard anodizing Low Temperature: -40ºC(-104°F) ~ 80ºC (+176°F). Connection - NAMUR, ISO5211, and ...

DN: 15 mm - 50 mm
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 180 °C

The actuator features anti water hammer that allows fluid to pass below the seat and an optical position indicator. Its body is made of stainless steel and its corrosion resistant. The rotation is possible up to 360 degrees, ...

DN: 15 mm - 50 mm
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 180 °C

Type: Angle seat valves Functioning: 2/2 way pneumatically operated, Normally closed Body material: Stainless Steel AISI 316 series Port connection: G 1/2, G 3/4, G 1, G 1 1/2, 1 1/4, 1 1/2, 2 Flow Kv (l/min): 80, ...

DN: 15 mm - 50 mm
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 180 °C

The 21IA-IP1 is a 2-way angle seat air operated valve that is capable of providing high flow rates. Its body has been constructed out of stainless steel and it features a corrosion resistant actuator than can be rotated ...

DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C

... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...

DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C

... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...

DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar

... conciliate available water reserves and the always increasing request for water. Usually, the network capacity is always greater than the effective request; this implies the necessity to utilize devices ...

DN: 2 mm - 16 mm
Temperature: -35 °C - 200 °C

Pneumatic control valve VALVE STYLE Butterfly valve USAGE Throttling service Low-pressure service On/off service Hygienic service VERSION ANSI SUPPLY Pneumatic VALVE ...

DN: 10 mm - 200 mm
Pressure: 0.2 bar - 10 bar
Temperature: -10 °C - 140 °C

Sanitary butterfly valves, whether manually or automatically actuated, can be used in most liquid product applications in the food-processing, pharmaceutical and chemical industries. The butterfly ...

DN: 20, 15, 10 mm
Pressure: 6 bar - 10 bar
Temperature: -10 °C - 140 °C

The aseptic INNOVA Mini N valve is a shut-off single seat valve suitable for any sterile use that the pharmaceutical, chemical, food or beverage industries could be required. The asepsis in the inner ...

DN: 25 mm - 100 mm
Pressure: 6 bar - 8 bar
Temperature: -10 °C - 140 °C

The INNOVA M-type valve is a pneumatic shut-off seat valve for hygienic applications. The valve is designed for the direction of product flow from the upper to the lower body. To ...

Pressure: 10 bar

... • Wide connection possibilities Applications • Water treatment Use To cut pipe systems Fluids Neutral media free of solids and aggressive liquid or gaseous media if the valve ...

DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 0 °C - 95 °C

... • Wide connection possibilities Applications • Water treatment Use To cut pipe systems Fluids Neutral media free of solids and aggressive liquid or gaseous media if the valve ...

DN: 10, 8 mm
Pressure: 16 bar

... of ball and ball joint is not possible Applications •Water treatment Use To cut pipe systems Fluids Neutral media free of solids and aggressive liquid or gaseous media if the valve ...

DN: 0.375 in
Pressure: 200 bar
Flow rate: 20 l/min

FR1-06-KD is an accurately regulating flow restrictor with an integrated non-return valve. It is made of stainless steel W.St.1.4301 and designed for both oil and water hydraulics. Suited for in-line ...

The Pressure Reducing Valve is made of solid BSP brass and stands at 1-1/4 inch. This unit is ideal for fitting in a water inlet.