ARO chemical pumps

Flow: 1.3, 3.1, 7 m³/h
Pressure: 7 bar

Almatec C-Series The Cost-Effective Plastic AODD Pumps The Almatec® C-Series Air-Operated Double-Diaphragm (AODD) Pump is a cost-effective, reliable and superior-built alternative and features a solid ...

Flow: 0.9 m³/h - 36 m³/h
Pressure: 7 bar

Almatec E-Series State-Of-The-Art Plastic AODD Pumps The development of the E-Series was based on the extensive experiences with the proven pump models. The solid design with distinctive wall thicknesses, ...

Flow: 10 m³/h - 100 m³/h

... manufacturing a variety of specialty pumps for supplying and circulating chemicals in the semiconductor industry. With its straight-through flow pattern technology, the Almatec FUTUR Series Air-Operated ...

Flow: 0 l/min - 4,000 l/min
Head: 0 m - 55 m
Power: 4 kW - 37 kW

... These materials enable the secure transfer of strong acids and alkalines as well as nearly all chemical solvents. Superior durability The exterior of the pumps is covered with ductile cast iron. Ample ...

Flow: 0 l/min - 5,000 l/min
Head: 0 m - 98 m
Power: 11 kW - 75 kW

... areas with a wide range of liquid specific gravities. Highly chemically resistant Fluoroplastic and fine ceramic wetted parts offer high resistance to virtually every industrial chemical, ...

Flow: 0 l/min - 1,400 l/min
Head: 13.5 m - 74 m
Power: 1.5 kW - 15 kW

... contact surfaces in the front and rear areas of the pump. Therefore high temperatures are avoided. This greatly improves resistance against dry running in comparison with conventional mag. drive fluororein ...

Flow: 0.02 us gal/h - 79.2 us gal/h
Pressure: 85 psi - 247 psi
Power: 62, 19, 110, 17 W

... mechanically-driven diaphragm pump to achieve a repeatability of ±1%. 70% Energy Savings Helical gears and return spring reduce power consumption by up to 70% compared to conventional mechanical diaphragm ...

Flow: 0.3 us gal/h - 3.2 us gal/h
Pressure: 0.15 bar - 1.2 bar
Power: 15 W

... Series have both digital input and Stop/Start inputs built into the pump, enabling either proportional or On/Off control. • IP65 Equivalent Protection A robust housing protects the pump from normal ...

Flow: 0.6 us gal/min - 6.7 us gal/min
Pressure: 150, 290, 73 psi
Fluid temperature: -10 °C - 60 °C

... the EWN-Y Pump: • The EWN-Y Series pump combined with EFS flow sensor provides accurate real-time control and display of the dosing rate. • Set point control allows the desired flow rate to ...

The propellant pump is especially suitable for bringing liquified propellants with a low boiling point to a high pressure. The pump guarantees a constant propellant pressure in the supply line and in ...

Flow: 720 m³/h
Pressure: 16 bar
Head: 110 m

Single stage chemical process pumps are mainly used to handle different type of chemicals with slight impurities. These pumps are offered with different material of construction ...

Flow: 7 m³/h
Pressure: 7.6 bar
Head: 76 m

... multistage pumps are designed in single shaft construction which eliminates transmission losses between motor and pump. Major components of these pumps are made up of corrosive resistance ...

Flow: 11 l/min
Pressure: 15 bar
Power: 0.55 kW

Electric, selfpriming gear pump for the supply of AdBlue®; guarantees a constant flow and a low noise level. Pump body in stainless steel AISI 304, gears in plastic. Protection category IP 55. Includes ...

Flow: 200, 10.5 l/min
Pressure: 4 bar
Length: 165 mm

Flow: 15 l/min
Pressure: 24 bar

Flow: 1,000 m³/h
Head: 120 m
Power: 250 kW

... plastic pumps Based on innovative strength and over 60 years of expertise in the use of thermoplastics, we have set a new milestone in the shape of a future-oriented, efficient and reliable pump system.It ...

Flow: 235 m³/h
Head: 68 m
Power: 30 kW

STÜBBE E-CLASS: entry-level model in the STÜBBE pump family horizontal, single-stage centrifugal chemical plastic pump with mechanical seal in monobloc design (not self-priming) efficient ...

Flow: 130 m³/h
Head: 42 m
Power: 11 kW

Horizontal single-stage spiral cased pump Shaft sealing through single or double acting mechanical seal Circulation, rinsing, quench or barrier medium depending on application Made of sturdy plastic components, ensuring ...

Flow: 0.5 m³/h - 3.5 m³/h
Pressure: 0 bar - 10 bar
Head: 9 m - 54 m

Horizontal low pressure multistage pumps can be used in numerous installations where the pump features and materials require specific conditions, such as: Air-conditioning Cooling Water treatment Fertilisation Environment ...

Flow: 11.3 l/h - 2,400 l/h
Pressure: 200, 95, 90 bar
Fluid temperature: -20 °C - 150 °C

... to the development of Nexa XP, a special version of Nexa able to cope with extreme suction conditions and a wide range of chemicals. Nexa XP complies with the most stringent requirements in terms of strength and reliability, ...

Flow: 3.4 l/h - 660 l/h
Pressure: 124 bar
Power: 1.1, 1.5, 0.18, 0.25, 0.75 kW

... result is a pump that delivers metering precision and consistency for repeatable results and efficient chemical consumption. Reliability Nyva’s ATEX-approved design and zero-leakage profile provide ...

Flow: 5.5 l/h - 1,000 l/h
Pressure: 10, 40 bar
Power: 0.18, 0.25, 0.37, 0.55, 0.75 kW

... , the Radix spring-return pump series offers the ideal solution for high-precision injection and metering of chemicals in multiple industrial applications. Available in both plunger and mechanical ...

... hand pump is a simple and cost effective method of moving small and medium quantities of liquid from a 200 L barrel, 60 L drum or a 25 L pail (requires an adapter). The pump is easy ...

Flow: 30 l/min
Pressure: 10 bar

1:1 CHEMICAL PUMP W/HOSE AND GUN The Unitor 1:1 chemical pump is ideal for use when applying cleaning chemicals before washing with high pressure or ...

Flow: 11.4 l/min
Pressure: 75 bar

The Unitor 10:1 Hydra-Clean chemical pump is ideal for a majority of fluid handling tasks onboard. Delivered ready to use and includes strainer, hoses, spray gun and nozzle. Pumps are ...

Flow: 2,600 m³/h
Pressure: 10, 15 MPa
Head: 300 m

... Clean or polluted, low or high temperature, chemically neutral or corrosive liquids;Refinery, petrochemical, chemical industry, coal chemical, desalination power station, fertilizer, pulp and paper, ...

Flow: 2,000 m³/h
Pressure: 2.5 MPa
Head: 160 m

... Application: Clean or polluted, low or high temperature, chemically neutral or corrosive liquids, petrochemical, chemical industry, coal chemical, refinery, pulp and paper, district heating, flue gas ...

Flow: 2,600 m³/h
Pressure: 2.5, 5 MPa
Head: 300 m

... discharge, suction and discharge flange pressure rating is the same. The pump body and impeller are equipped with replaceable sealing rings, which balance the axial force in the pump through the balance ...

Flow: 55, 71, 87 l/min
Head: 23, 16, 10, 7 m
Power: 450, 250 W

... ventilated universal motor. The lightweight, handy and powerful device can be used as drive for the pump tubes of the laboratory and drum pumps and is useful in this combination for many thin fluid, ...

Flow: 82, 61 l/min
Head: 9, 20 m
Power: 460 W

... polypropylene ensures a high chemical resistance when aggressive vapours of acids and alkalies are present. The standard in the on/off switch integrated low voltage release is intended to prevent an uncontrolled start ...

Flow: 55, 66 l/min
Head: 7.5, 15 m
Power: 400 W

The drum pump motor JP-164 is a compactly built, not explosion-proof, internally ventilated universal motor, that has proven itself for slightly viscous media as diesel in agricultural field and at fire brigades foaming ...

Flow: 750 m³/h
Head: 160 m
Power: 315 kW

Vertical Reverse Circulation Pump This is a vertical-orientation, reverse circulation canned motor pump, typical for applications involving liquefied gases and refrigerants. Designed for zero-leakage ...

Flow: 4 m³/h
Pressure: 160 bar

SID SolidPumps is a specialist for piston pumps suitable for the most demanding industrial applications. An undeniable know-how and more than 30 years of experience enable SID SolidPumps to provide services corresponding ...

Flow: 8 m³/h
Pressure: 160 bar

SID SolidPumps is a specialist for piston pumps suitable for the most demanding industrial applications. An undeniable know-how and more than 30 years of experience enable SID SolidPumps to provide services corresponding ...

Flow: 15 m³/h
Pressure: 160 bar

SID SolidPumps is a specialist for piston pumps suitable for the most demanding industrial applications. An undeniable know-how and more than 30 years of experience enable SID SolidPumps to provide services corresponding ...

• Flow rates and prevalence on request • Made of PP or PVDF

• Flow rates and prevalence on request • Made of PP or PVDF • Filter chambers with discs, cartridges, wires, bags

Flow: 10 m³/h - 30 m³/h
Pressure: 12 bar
Power: 5.5 kW - 11 kW

The “Dragon ME” series represents the evolution of the Dragon piston pumps series with the addition of the membrane unit in case of pumping highly abrasive liquids. Flow ranges: from 20 to 30 mc / h - in single mode ...

Flow: 10 m³/h - 60 m³/h
Pressure: 12 bar
Power: 5.5 kW - 11 kW

... under control. Flexibility of use and structural strength. In order to achieve these results the pumps had to be equipped with a proportional hydraulic pump, capable of constant power adjustment and ...

Flow: 1 m³/h - 10 m³/h
Pressure: 12 bar
Power: 1.5 kW - 5.5 kW

Piston Pump - "Libra" Series from 1 to 10 mc/h Pressure up to 15 bar Many materials configuration For pressure transfer of viscous liquid For sludge feeding of Filterpress For chemical Industry, ...

Flow: 6 m³/h
Pressure: 10 bar

The Compact pump is based on the “Moineau” progressing cavity pump principle. The Compact cast iron progressing cavity pump is ideal for small ...

Flow: 55 m³/h
Pressure: 15 bar

... Delasco™ DX has been designed to sustain both internal and external wear factors, whether they are chemical or mechanical. DX Series benefits One pump for all fluids Ideal for abrasive and high solids ...

Flow: 20 m³/h
Pressure: 3 bar

The pump which reduces your maintenance costs With various pump constructions and a wide choice of elastomer hoses, the Delasco™ range allows to cover a wide variety of applications calling for heavy ...

Flow: 1.66 l/s
Power: 1.1 kW

FEATURES High pressure Magnetic pumps can be used with chemically aggressive liquids Best resistance to working conditions Significant improvement in safety and durability Robust structure. Continuous efficiency Hermetic, ...

Flow: 0.53 l/s
Power: 90 W

FEATURES No lock needed No leak risk Compact and high resistant design Running for long periods without need of spare parts Easy maintenance Do not allow to run dry! APPLICATIONS Allows transfer of the majority of chemical ...

Flow: 0.2 l/min
Pressure: 500 bar

... Supercritical Fluid Preparative scale CO2 extraction Equipment No：SE-600-10000C Info： Application Focuses 1. Chemistry labs 2. Research institutes 3. Chemical/ Food factories 4. Sample extraction Features 1. ...

Chemical resistant pump pushes 833 litres per minute, debris up to 5mm, and a total head of 31m. Maximum output capacity (L/min) - 833 Inlet/outlet diameter thread type (mm/inches) - 50/2-NPT Total ...