- Detection - Measurement >
- Position, Speed and Acceleration Measurements >
- Linear position sensor >
- Automation Sensorik Messtechnik
Automation Sensorik Messtechnik linear position sensors

Measuring range: 100 mm
Measuring rate: 5 kHz
Quantum 100mm Linear Position Sensor A robust, lightweight linear position sensor with a 100mm measurement range. The non-contact MagnetoResistive ...

... inductive, radar-based - EMG sensor technology with sensitivity Determining the strip position is the most important goal for all strip guiding solutions. At EMG, this goal is achieved via optical, ...

Measuring range: 2 mm - 200 mm
Linearity: 0.3 % - 1 %
LVDT with unguided armature, high accuracy and almost infinite resolution. Optionally, the sensor can be paired with armatures of different lengths (core extensions).
inelta Sensorsysteme

... mA.)300Sen. Dis.(mm) FM NFM1.52.5Switching Frequency (Hz.)2500Voltage Drop At Full Load (VDC)2.5No. Load Current (mA)>10.0Position IndicationLEDResidual Current (mA.)0.001Cable Length(mm)2000Housing MaterialBrass

Measuring range: 0 mm - 600 mm
Linearity: 0.3 % - 0.5 %
Measuring rate: 300, 10 Hz
... wear About the P100 Linear Inductive Position Sensor Our P100 LIPS (Linear Inductive Position Sensor) is an affordable, durable, ...
Althen sensors

Measuring range: 0 mm - 50,000 mm
Linearity: 0.1 %
Supply voltage: 0 V - 10 V
... extension position sensor DSW10 is developed for linear position measurement in industrial applications. The sensor is an agile and a practical solution ...
YUTTAH (FZE)

Measuring range: 0 m - 12 m
Linearity: 0.3 %
Supply voltage: 5 V - 30 V
... measuring range High strength plastic housing for using in rough environments CE/FCC/ROHS DWS sériés is draw wire distance sensor that mount high précisé potentiometer and has various output type and maximum length ...
DAS Co., Ltd.

Magnetbau Schramme’s small LVDT NG6 position sensor can be installed in any position. It features extreme accuracy and maximum linearity at minimum size. Position ...
Magnetbau-Schramme GmbH & Co. KG

The LPS is specifically designed to provide position feedback on linear control and knifegate valves. The LPS uses a hermetically sealed sensor element and is not a GO® Switch leverless ...

OIS22 Absolute position sensor for oleodynamic cylinders General Description In order to know continuously the absolute position of the rod in a cylinder (oleodynamic cylinders application ...

Measuring range: 50, 80, 100, 125, 160 mm
Measuring rate: 1 kHz
Supply voltage: 24 V
The universal transmitter solution. With three options for signal evaluation: classic, analog, programmable switching output, or programmable IO-Link® output. The sensing ranges of the transmitter are perfectly coordinated to the standard ...

Supply voltage: 10 V - 30 V
Ambient temperature: -25 °C - 90 °C
... magnetic sensors allow position monitoring of the pistons of cylinders with nonmagnetisable housings (aluminium or bronze). An annular permanent magnet is fixed to the piston, and its magnetic field ...

... expensive setup can be replaced by an Analog Hall module. This module uses the magnet track, as opposed to the ruler, as the linear scale. It can be easily mounted on our iron core motors and communicates with practically ...

Digitale Hall ModuleFor commutation, we have an optional digital Hall module that can be used with our entire range of linear motors. Its sensors provide 3 digital outputs, each phase shifted 120 degrees, ...

Measuring range: 3.5 mm
Measuring rate: 1 Hz - 208,000 Hz
High-precision non-contact absolute position measurement on up to 64 synchronized channels ZPS SensorZYGO's ZPS™ system measures absolute position using ultra-compact optical sensors ...

Axle load sensor GNOM DP is designed for cars equipped with spring suspension. System of levers is used when installing the sensor.
TECHNOTON

... the calibration table. GNOM DP position sensor is installed on the rear axle or the rear bogie of the vehicle. A single sensor is enough to monitor vehicle axle and cargo load. Spring ...
TECHNOTON

Wireless axle load position sensor GNOM DP S7 is used in transport telematics systems (GPS/GLONASS vehicle monitoring systems) to monitor axle loads, determine the axle load in vehicles with spring suspension, ...
TECHNOTON

• Power supplier: 5Vdc • Absolute accuracy: +/-0.05mm • Repeatable accuracy: +/-0.015mm • Sincos Signal: 1Vpp • Signal period: 24mm

• Power supplier: 5Vdc-28Vdc • For Communication • Phase shifted: 120 • Phase 3 Digital output: 3

Measuring range: 15 mm
Ambient temperature: -10 °C - 85 °C
... range: -25°C to + 70°C Replaceable battery Dimensions: 105 x 50 x 27 mm Zone: Sigfox RC1 LoRaWAN® EU863-870 Sensor position Door open Door close

Measuring range: 25 mm
Linearity: 0.5 %
Supply voltage: 24 V
The PT25LVDT industrial LVDT displacement transducers can be AC or DC powered and are sealed to IP65 as standard with the option of IP68 making them ideally suited for harsh and demanding applications where conditions ...

Filling sensors are useful for remotely monitoring the filling level of waste collection containers. Function Equipped with sensors which transmit data such as filling level, temperature, tilting ...

... a precision touch sensor to determine workpiece offsets and tool length. They can be mounted on workpiece surface or machine table. An LED lamp illuminates immediately when the cutting edge touches the sensor ...

... even less time You can reduce your reject rate with the TRUMPF seam position control. The sensor systems detect the joint gap during the welding process and control the welding position. ...

The non-contact EPS position sensor system is a tried and tested component of RACO actuators for monitoring end positions, analogue position feedback or electronic overload ...

Linearity: 0.2 %
Supply voltage: 24 V
Ambient temperature: -20 °C - 60 °C
• - Contactless position feedback • - Extremely reliable under vibration • - Life is practically infinité, as compared to a potentiometer, which wears every time it moves • - Microcontroller, MSP430 based transmitter, ...

KERADOUCE® Integrated Measuring System. Our proprietary SMIKTM sensor provides the following technical data : - Position of the rod - Velocity of the rod - Acceleration et deceleration of the rod Our ...
DOUCE HYDRO

Measuring rate: 1,000 Hz
Cable Length 2mCable Connecton plain endHousing length: 29.5 mmOutput type: NPNSwitching frequency: 1,000 HzElectrical wiring: DC 3-wireEnclosure rating: IP 65, IP 67
Your suggestions for improvement:
Subscribe to our newsletter
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining