- Production Machines >
- Forming Machine >
- Pneumatic press >
- Bimba
Bimba pneumatic presses
Force: 100 kN
Rate (strokes/min): 190 p/min
Stroke: 8 mm - 52 mm
Standardized steel frame construction Alloy steel shaft Pneumatic cluch brake unit Pneumatic system composed of: tank, safety valve, filter, dual solenoid valve with dynamic control, pressure switch Centralized ...
MIOS PRESSE SRL
Force: 200 kN
Rate (strokes/min): 155 p/min
Stroke: 8 mm - 60 mm
Standardized steel frame construction Alloy steel shaft Pneumatic cluch brake unit Pneumatic system composed of: tank, safety valve, filter, dual solenoid valve with dynamic control, pressure switch Centralized ...
MIOS PRESSE SRL
Force: 400 kN
Rate (strokes/min): 140 p/min
Stroke: 5 mm - 76 mm
Standardized steel frame construction Alloy steel shaft Pneumatic cluch brake unit Pneumatic system composed of: tank, safety valve, filter, dual solenoid valve with dynamic control, pressure switch Centralized ...
MIOS PRESSE SRL
Max. pressure: 6 bar
Weight: 80 kg
Overall width: 350 mm
The SP 4 sealing press allows sealing of almost any conceivable 2-dimensional shape. This is made possible by special sealing tools, which are individually manufactured for your application. The pneumatic ...
joke mechanix GmbH
Force: 4,200 N
Stroke: 100 mm
Max. pressure: 6 bar
The SP 4 sealing press allows sealing of almost any conceivable 2-dimensional shape. This is made possible by special sealing tools, which are individually manufactured for your application. The pneumatic ...
joke mechanix GmbH
Opening: 95 mm
Max. pressure: 6 bar
... -hand control Protection class: IP 54, based on Connected load: 400 V, L1/L“/PE, 50/60 Hz Fuse: 16 A, slow-blow Compressed: air required Technical data • Fuse : 16 A, slow-blow • Connected Voltage : 400 V • Actuation ...
joke mechanix GmbH
Force: 250 kN - 4,000 kN
Stroke: 3 mm - 270 mm
... High performance open back stationary pneumatic press Main Features: 1, This series of press frame is welded by steel plates, small deformation, good rigidity. 2, This series ...
Force: 4 kgf
Hydraulic pump power: 2.7 kW
... gear presses, pneumatic punch presses, hydraulic presses and other occasions. 3,Compact structure, flexible layout and space saving 4,Fast movements, up to 12 to 15 times per minute (depending on the range of motion, ...
Force: 150 tf
... Pace 6000 pneumatic bulge forming unit provided to control the air pressure (4) 4” diameter chrome housing posts with graphite impregnated bronze bushings for superior ram guidance and rigidity (2) ...
... customer and adapt the design of the press to meet their expectations. Test presses are key to obtaining the necessary quality of the final part within a short die-setting period. That is why the behaviour of the test ...
Force: 630, 2,500, 1,000, 1,600 kN
... requirements. Your advantages Modular structure of the press: if production conditions change, the press can be retrofitted at any time, from manual loading through to fully automatic production Ergonomic ...
Force: 5 tf
Opening: 6 in - 14 in
... pistons attached to a single shaft. This creates a larger collective surface area for air pressure to act on as the pistons are energized simultaneously via special internal air passages, multiplying ...
Overall length: 1,850, 2,010, 1,700, 2,235, 2,400 mm
... casting of parts. A pneumatic clutch brake combination and hydraulic overload safety system is used to increase safety and decrease part defects. The overload has a response time of less than 0.01 seconds to help protect ...
Weight: 43 kg
... adjustable pneumatic actuator, a 32 mm cylinder and a driving stroke ranging from 25 to 100 mm, the Xxtd40 ultrasonic press ensures a repetitive soldering procedure and steady results. The Xxtd40 ultrasonic ...
Force: 800 kN - 6,300 kN
... qualities to satisfy the needs of customers by allowing specific customized functions (hydraulic and hydromechanical cushions, pneumatic blankholders, adaptions for automatic production, automatic tool-change equipment (SMED)...)
Force: 570 kgf
Max. pressure: 2 bar - 6 bar
Weight: 25 kg
working thrust for bar - - kg. - 95 backward stroke for bar - - kg. - 80 working pressure - - - bar - 2÷6 micrometric control stroke - - - bar - 0÷60 tool diameter - mm. - 12x28 total weight - - - kg. - 25
MORUECO s.r.l.
Opening: 35 mm
... presents APK series pneumatic toggle presses. The toggle presses have optimum transmission ratios. These ratios generate high forces at the end of the stroke and provide low air consumption. The low energy ...
KMT Produktions- + Montage-Technik GmbH
Opening: 1,500 mm
Radio Frequency / High Frequency Welding Press CP100PB 10kW RF/HF 20kVA. Welds up to 300 cm² of PVC ( e.g. 100 cm x 3 cm ) with a C-frame 1500mm deep and a worktable 1200 x 1500 mm, earth electrode and side rollers for ...
Matrelec
Pneumatic toggle presses: APK*L and VKL series The optimum transmission ratio of the toggle provides high forces at the stroke end and ensures a minor air consumption. Due to the low power consumption, ...
ips - Werkzeugtechnik gmbh
Force: 300 kN
... mm up to max. 85 mm Extreme and constant tooth pitch accuracy With pneumatic clutch and self lubricating complete system Punching speed infinitely variable Require 10 bar compressed air Machine ...
Silicon
Force: 5, 0.5, 2 tf
Opening: 0 in - 12 in
Stroke: 6 in
... development to determine press specifications. Standard Features: Table top design 4-post press construction Low friction seals in cylinder FEA designed rigid framework for infinite life Smooth ...
Force: 100 kN
Opening: 50 mm - 1,000 mm
Stroke: 1 mm - 20 mm
Force: 100 kN - 1,000 kN
Stroke: 45 mm - 140 mm
Working speed: 25,000 mm/min
Deep throat press machine with cnc feeding table mechanical Deep-throat press machine Automatic Feeder Table For Punching machine , Scope, Specification and Standard feature 1) ...
Prima CNC Machinery
Force: 1,200 kgf
Pneumatic press for riveting, eyeletting or punching in various workpieces and materials. The press is equipped with a very strong membrane cylinder (1200 Kg). Depending on the thickness ...
Walter Winter Verbindungstechnik GmbH & Co.KG
Force: 450, 600, 800, 1,600, 250 kN
Stroke: 80, 100, 120, 140, 160 mm
Hydraulic pump power: 7.5, 15, 5.5, 4, 3 kW
... production of mechanical products, household goods, road signs and office supplies. Feature of the pneumatic punch press 1. The pneumatic punch press works quickly, ...
Force: 10 tf - 100 tf
Cast iron inclinable frame Central lubrication system Quick stroke adjustment with pneumatic clutch and brake
Umar Makina Company
The LP machine series offers very low air consumption thanks to special multi-chamber cylinders, and has a continuously adjustable 40mm stroke as standard
GECHTER
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining