- Detection - Measurement >
- Electrical Measurements >
- Detector >
- Bruker
Bruker detectors
Product Introduction The helium gas concentration detector is suitable for various helium gas concentration detection in various industrial environments and special environments. The instrument adopts imported electrochemical/infrared ...
Product introduction: The hand-held helium gas detector is used in occasions for rapid detection of helium gas concentration, temperature and humidity measurement, and over-standard alarm. The hand-held gas detector ...
The detection of glass breakage is a very sensitive issue for a wide variety of fillers, regardless of the product to be filled. There are special requirements for glass breakage detection, especially in the food sector, since in individual ...
RTC6122W WLP Packaged Uncooled Infrared Detector employs a self-developed 12μm uncooled VOx thermal imaging sensor capable of 640×512 resolution. Available in a WLP package, the RTC6122W infrared detector ...
Yantai IRay Technology Co., Ltd.
RTD3122CR Ceramic Packaged Uncooled Infrared Detector employs a self-developed 12μm uncooled VOx thermal imaging sensor capable of 384×288 resolution. The product's low power consumption, compact size, and TEC-less operation ...
Yantai IRay Technology Co., Ltd.
RTD6122CR Ceramic Packaged Uncooled Infrared Detector employs a self-developed 12μm pixel-size uncooled VOx thermal imaging sensor capable of 640×512 resolution. The product's low power consumption, compact size, and ...
Yantai IRay Technology Co., Ltd.
... pyro-electric detector mounted in a common optical chamber with an external retroflector to provide an open gas sensing chamber. Each dual channel detector is fitted with two optical filters. One channel ...
... pyro-electric detector mounted in a common optical chamber with an external retroflector to provide an open gas sensing chamber. Each dual channel detector is fitted with two optical filters. One channel ...
... pyro-electric detector mounted in a common optical chamber with an external retroflector to provide an open gas sensing chamber. Each dual channel detector is fitted with two optical filters. One channel ...
Introduction: ZWIN-PMV06 detector is an intelligent "image vision" sensor detection system developed for the detection of atmospheric particle concentration. It adopts high-sensitive imported components, integrates ...
Tianjin Zwinsoft Technology Co.,Ltd.
ZWIN-SKY3000 Portable gas detector ZWIN-SKY3000 series is a high-performance portable gas detector that can detect multiple gases (Oxygen compounds VOC, combustible gas and toxic gas) at the same ...
Tianjin Zwinsoft Technology Co.,Ltd.
... -PVOC06 VOCs detector is on-line monitoring instrument of volatile organic compounds (VOC) based on the principle of photoion detection. It is fast in response with no poisoning phenomenon. Principle PID is a photoionization ...
Tianjin Zwinsoft Technology Co.,Ltd.
MV Voltage detector 1 - 69 kV Standards IEC 61243-1 VOLTAGE DETECTORS CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 kV A.C. CE: Compliance with European directives. Use These voltage detectors ...
PENTA
... will be. ALADIN is suitable for outside and indoor electrical equipment. Technical specifications Electric field detector : Detector operating range: 2 kV to 400 kVReference detection distance: ...
PENTA
LV Voltage detector with digital display Standards IEC 61243-3 Use Heavy duty voltage detector for checking the absence of voltage and giving voltage level indication on low voltage up to 1000V. This ...
PENTA
A New Angle on Accuracy The MS-90 Plus+ combines the build quality and accuracy of different EKO sensors into one compact and efficient DNI, GHI and DHI total solar irradiance measurement solution, a reliable, accurate, cost-saving ...
EKO Instruments
... Irradiance (DNI) without a sun tracker based on a unique rotating mirror design that reflects the sunbeam onto a thermal detector. DNI measurement (<10% uncertainty) Cost-effective, no sun-tracker required Spectral ...
EKO Instruments
PAR 400 to 700 nm The compact ML-020P PAR or Quantum sensor has a special optical filter that mimics the spectral response function of plant leaves and is designed for horticulture and agricultural applications. Compact design PAR ...
EKO Instruments
RC151 indoor ceiling mount presence detectors bring energy saving and automatic lighting control / HVAC control intelligently to home and office with ease and comfort. The whole product lineup is available for multi-way ...
EmCom Technology Inc.
Corridor Sensor RC152 indoor ceiling mount Corridor type presence detectors bring energy saving and automatic lighting control / HVAC control intelligently to home and office with ease and comfort. The whole product ...
EmCom Technology Inc.
Wide space, Extensive detection! RC153 indoor ceiling mount Wide Range presence detectors bring energy saving and automatic lighting control / HVAC control intelligently to home and office with ease and comfort. The ...
EmCom Technology Inc.
HVD high voltage indicator is adapted for indoor electrical panel, used in MV / HV switchgear. It is connected via internal wiring to capacitive sensors inside the switchgear. Rated voltage 3~40.5kv, operation frequency 50Hz network to ...
This new cable detector consisting of a transmitter and a receiver is suitable for the search of voltage-free and voltage - carrying lines, as well as line interruptions and line tracking of surface and flush-mounted ...
PTM600 Portable Multi-Gas 18 in 1 Gas leak Detector PTM600 gas monitor is provided with high measurement precision, stable performance, and simple operation, and is convenient to carry. It is possible to simultaneously ...
Beijing Zetron Technology Co., Ltd
PTM600-S can simultaneously detect toxic and combustible gases, suitable for the dangerous or hazardous space, such as tunnels, culverts, storage rooms and other restricted spaces where the air can not be circulated. The system could ...
Beijing Zetron Technology Co., Ltd
MS104K-S portable diffusion gas detector is a compact, ultra-low power consumption, mobile rapid detection of gas concentration detector, that can detect 1 to 4 gases at the same time, with a large capacity ...
Beijing Zetron Technology Co., Ltd
Spark detector RIV-601P/S is an electronic fire alarm device, sensitive to sparks and incandescent bodies in movement. Its use is particularly recommended on dust collection systems in factories where wood is processed, ...
Control Logic Srl
... function: the alarm signaling LEDs of the detectors and of the flow switch “remember” the alarm occurred blinking until the manual reset (RESET). Operating voltage 24Vdc. It includes: 1 RIV-601P/S spark detector, ...
Control Logic Srl
... function: the alarm signaling LEDs of the detectors and of the flow switch “remember” the alarm occurred blinking until the manual reset (RESET). Operating voltage 24Vdc. It includes: 2 RIV-601P/S spark detector, ...
Control Logic Srl
... is measured using an universal detector, the catharometer. An oven is installed in order to allow the regeneration (to avoid contamination) of the column at 250°C. A pressure safety is inserted just after the detector ...
... notifications mostly in industrial applications. The SONOCHECK ABD06 air-bubble detector is equipped with a contactless detector that enables the sensor be applicable for operations that needs hygienic ...
The SONOCHECK ABD07 miniaturized air bubble sensor is designed to offer excellent price-performance ratio. The compact sensor detects air bubbles at tubes and follows the trend for miniaturization and meets various requirements of customer. ...
... alerts. The device is applicable on medical technology industry because of safety requirements. Its design permits the detector for the usage of areas that have hygienic requirements. The tube was inserted into ...
... Pyroelectrical Material (CPM) the detector features a very high detectivity of up to 4.0*10^8 cm√Hz/W and sensitivity of up to 200000 V/W. The signal quality of our pyroelectric sensors is unchallenged. The detector ...
Micro-Hybrid Electronic GmbH
... pyro-detector measures methanol (CH4O/half structure formula: CH3OH) & ethanol (C2H5OH) at ambient temperatures between -20 and 85 °C. With its high detectivity of up to 4.0*10^8 cm√Hz/W and a sensitivity of up to 200000 ...
Micro-Hybrid Electronic GmbH
... between -20 and 85 °C for NDIR gas measurement in medical applications, e.g. anesthetic gas monitoring. The pyroelectric detector has 2 chips with a thin film CPM membrane in the core. (CPM: Ceramic Pyroelectrical Material). ...
Micro-Hybrid Electronic GmbH
Allows touchless AC detection in range from 90 to 1000V • indicates live conductors • continuity buzzer • optic signalization of voltage presence by flashing LED (quite cycle) • voltage range: 90 ~ 1000VAC • frequency: 50/60Hz • ...
... sampling line). • - Long warranties, 5 years on the detector, 15 years on the infrared sources. • - Low maintenance, occasional filter and optics cleaning required. The integrated gas detectors works ...
... pushed into the detector, this system guarantees much more stability and less maintenance than the standard continuous flow sampling systems with capillaries. The precision of an FID detector and the ...
Portable combustible gas detectors are a repacement for the succesfull XP-3110 and XP-3160 portable gas detectors. Portable combustible gas detector, easy to use for the detection of ...
New Cosmos
The XPS-7 II suction type portable gas detector is a unique detector which enables you to switch easily between gases when needed. The sensors are kept under power in a so-called sensor stocker. The ...
New Cosmos
A suction type detector for indoor use. Sensor units are factory calibrated and delivered to site ready for use. Optional communication module for DeviceNet interface or PoE, ModBus/TCP Features: Sensor units are already ...
New Cosmos
... process-controlled and dynamic amplifier analysis always within the optimum range. The amplified signals are digitised directly at the detector and get transmitted as digital data to the CPU for the analysis. Therefore ...
The Amplifer Probe CT-581A is used in the identification of and trace wires or cables that are present within a group, without insulation damage. The device works with any Tone Generator in wire identification. Its volume can be adjusted ...
The TECPEL HVP-275 is a high voltage proximity detector.It has eight voltage detection settings from 240Vac to 275kVac. The HVP-275 consists of an internal pickup sensor plate, a sensitivity selector, a visual, and a ...
The cable detector, Testboy 26, makes it easier to find cables in the wall and cable ducts. Here, an adapter or carrier signal from the transmitter is modulated by means of crocodile clips or the adapter to one end of ...
Testboy
... you demand in a rugged, handheld radioisotope identification device. ORTEC’s RADEAGLET-R™ lightweight, handheld radiation detector provides the speed and reliability to identify potentially hazardous radiation sources ...
ORTEC
The ITEL is designed for use with the catalytic combustible sensor, electrochemical sensor, PID sensor and infrared sensor. Features Industry standard linear 4-20mA output. RS-485(Modbus RTU) and relay output. HART ...
Macro Technology Instruments Co,. Ltd.
The ITEL Plus multi-function gas detector (AL.) is designed for use with sensor cartridge. Features Use aluminum alloy housing for transmitter & S.S.316 for sensor housing. 4~20mA output(3-wire or 4-wire). ...
Macro Technology Instruments Co,. Ltd.
The 6000-KD is designed for use with the catalytic combustible sensor. Features Industry standard linear 4-20mA output. RS-485(Modbus RTU) and relay output. HART output(option). Using a magnet wand for calibration ...
Macro Technology Instruments Co,. Ltd.
The OMD-351-O2 online oxygen monitor combines a rugged CE marked wall mount design with SSO2’s precision oxygen sensor technology. The unit is designed to safely measure breathing air oxygen in confined spaces. The unit comes with a ...
The OMD-351-O2-CO2 online dual oxygen and carbon dioxide monitor combines a rugged CE marked wall mount design with SSO2’s precision sensor technology. The unit is designed to safely measure breathing air oxygen and carbon dioxide in ...
The MED-19 portable oxygen monitor combines a modern rugged CE marked design with Southland Sensing’s precision oxygen sensor technology. The unit is specifically designed to safely and easily verify oxygen and other medical gases used ...
RA-915AM monitors are designed for continuous mercury measurements in ambient air, indoor air and in natural gas. Ideal for permanent unattended installation at air monitoring stations, RA-915AM monitor for ambient air allows ultra-sensitive ...
RA-915AMNG monitors are designed for continuous mercury measurements in a natural gas stream and are ideal for permanent unattended installation at the gas monitoring stations. RA-915AMNG monitor for natural gas allows direct rapid analysis ...
CRAB is an easy-to-operate, active oil slicks optical detector. The instrument detects the presence of oil using optical sensing with a vertical laser beam and measuring the differences in the reflection properties of ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining