Bühler electric motors

Torque: 7 Nm

... input. ► Motor current overboost. ► Intelligent management of the current profile. ► Range of operating voltage: 32-80 VDC. ► Protections: -Protection against under-voltage and ...

Torque: 3 Nm

... POSITION and CSP. ► Different variety of HOMING operation modes. ► TOUCH PROBE hardware input. ► Motor current overboost. ► Intelligent management of the current profile. ► Battery ...

... Setting by means of a rotatory dip-switch. ► Automatic current reduction at motor standstill. vProtections: -Protection against under-voltage and over-voltage. -Protection against a short-circuit ...

Power: 0.06 kW - 315 kW
Rotational speed: 1,000, 750, 3,000, 1,500 rpm
Diameter: 56 mm - 355 mm

Huifeng’s three phase motors are general purpose motors and designed according to IEC 60034. The motors can be customized according to your requirement. •Junction Box is 90° Rotatable ...

Power: 0.25 kW - 2.2 kW
Rotational speed: 3,600, 1,800 rpm
Operating temperature: -10 °C - 40 °C

Huifeng’s NEMA standard series motors are designed in accordance with NEMA MG.1:2016. •Rigid base (Welded on), or C-face with removable reet or round body (footless) are optional •T flange and customized shaft end ...

Power: 0.06 kW - 5.5 kW
Rotational speed: 1,000, 1,500, 3,000 rpm
Operating temperature: -10 °C - 40 °C

... phase and single phase motors are suitable for fans and blowers, the motors are reliable, durable, high efficient, flexible and safe, your overall operating costs and downtime can be minimized by using ...

Rotational speed: 500, 600 rpm
Diameter: 48 mm
Operating temperature: -30 °C - 80 °C

The syncronous motors work only from an alternate current and consequently their speed is strictly bound to the frequency of the power line wired.It could be ordered in clockwise, anticlockwise and no-sense rotation.

Rotational speed: 450, 375 rpm
Diameter: 38 mm
Operating temperature: -30 °C - 80 °C

The syncronous motors work only from an alternate current and consequently their speed is strictly bound to the frequency of the power line wired. It could be ordered in clockwise, anticlockwise and ...

Rotational speed: 10,000, 2,700 rpm
Diameter: 27.5 mm
Operating temperature: -30 °C - 80 °C

The model M70 works with a continuous current; it is available only for low voltage, and for construction, can run into the two directions,changing the polarity of the applied voltage.

Power: 0.09 kW - 18.5 kW

... of variants: ABM AC induction motors are available as energy-saving motors, single-phase motors, liquid-cooled motors, two speed motors, ...

Power: 0.12 kW - 13 kW
Torque: 0.75 Nm - 75 Nm
Rotational speed: 500 rpm - 6,000 rpm

The ABM SINOCHRON® motor is a permanently excited synchronous motor with internal permanent magnets (IPM motors). Through the special design, additional encoder technology is not needed, ...

Power: 0.25 kW - 2.2 kW
Intensity: 1.6 A - 11 A
Operating temperature: -10 °C - 40 °C

3-phase Motor with Integrated Controller. The switch to 3-phase motors is accomplished easily and impresses with a high reduction of TCO at maximum efficiency. • Identical power ...

- vapor deposition after pyrolysis of coating material - Coating Thickness Uniform - IP X7 rating level

- Moulding all electrical parts - Protect electronic components in high-water environments - IP X6 Rating Level

- Coating surfaces with acrylic solution on all electrical parts - Protect electronic components in a moisture-containing environment - IP X4 rating level

Power: 12.8 kW

... low-noise. The permanent magnet synchronous motor convinces with high power density and extraordinarily high efficiency. The encoder system implemented in our drives guarantees exact positioning and optimum motor ...

Power: 12, 30 W
Intensity: 1.1, 1.52 A
Torque: 0.018, 0.0408 Nm

... production and sales of the hollow cup permanent magnet DC motor. Hollow cup motor is a high performance motor structure is special, hollow cup motor ...

Power: 3, 4 W
Intensity: 0.35, 0.4 A
Torque: 0.0095, 0.0083 Nm

... production and sales of the hollow cup permanent magnet DC motor. Hollow cup motor is a high performance motor structure is special, hollow cup motor ...

Power: 0.6 W
Intensity: 0.15, 0.11 A
Torque: 0.002, 0.0008 Nm

... production and sales of the hollow cup permanent magnet DC motor. Hollow cup motor is a high performance motor structure is special, hollow cup motor ...

... synchronous and asynchronous motors. Our high efficiency motors enhance the capacity to generate the maximum benefits for those who going to use them. The objective of the TDM is to provide high-performance ...

Power: 0.12 W

These motors are a marvel of modern engineering! They combine rare earth magnets with a coreless design to produce high torque motor with only a 6mm diameter. They feature a sintered bronze bearing to ...

Power: 0.053 W

These motors are a marvel of modern engineering! They combine rare earth magnets with a coreless design to produce high torque motor with only a 7mm diameter. They feature a sintered bronze bearing to ...

Power: 0.092 W

Miniature coreless DC motor in the larger 10mm form factor with a 1mm output shaft. The coreless design produces a high torque output and low spindle inertia for higher performance. Typical applications ...

* It is scientifically designed and reasonably configured following customized schemes on customers’ field ,output,material types and so on.It is high in automation; * Monitored by computer,PLC control,safe,high-efficient,conservation ...

Power: 94.07 W
Intensity: 4.2 A
Torque: 3 Nm

This NEMA motor satisfies any requirement. As a cloosed-loop stepper motor with 2 phases, it turns 1.8° per step and ensures steady movement and an optimum holding torque of 3 Nm. The feedback loop allows ...

Intensity: 0.6 A
Torque: 0.018 Nm
Rotational speed: 3,000 rpm

Our NEMA 8 series are very small high torque stepper motors that can reach up to 3000 rpm. These motors are used in the model making and maker scene as well as in the industrial environment (e. g. ...

Power: 15.435 W
Intensity: 1.5 A
Torque: 0.45 Nm

This stepper motor can be optimally used for tasks in the areas of Automation, CNC (f. e. engraving lasers, 3D printers, milling machines, etc.), or robotic. As a bipolar stepper motor with 2 phases, ...

... and need of the client, we offer different solutions of motors / motorizations. Most common used motors are: hydraulics (working on a range of 25 to 400cm3/rev.), direct current electric ...

Power: 0.1 ch - 1 ch
Rotational speed: 825, 1,075, 1,625 rpm

... Direct Drive Blower Motors are designed to meet manufacturer’s requirements for drive ventilation units The PSC Ventilation Direct Drive Blower Motor is continuous duty and air over Designed ...

Power: 0.333, 0.25, 0.75, 0.5 ch
Rotational speed: 1,725 rpm

Resilient Base Motors-Single Phase Fan & Blower Service GW Single Phase Fan&Blower Motors are suitable for belt-driven fan or fan-on-shaft applications The Single Phase Fan&Blower Motor ...

Power: 0.16, 0.25, 0.33, 0.5, 0.75 ch
Rotational speed: 1,725 rpm

Residential/Industrial-Split Phase-Belted Fan Motors GW Residential Industrial Belted Fan Motors are low starting torque The Residential Industrial Belted Fan Motor has automatic overload ...

Stepper-Motor: 5-Phase Manufacturer: Sanyo Size: 28mm

Power: 100 ch - 30,000 ch

TECO's medium- and high-voltage inductive motors (100-30,000HP) boasts high performance, low vibration/noise, and high stability, and can be coupled with variable-frequency drive, capable of high turning-moment output ...

Power: 0.25 ch - 300 ch

TECO produces low-voltage motors, including permanent-magnet motors (3-120HP) and inductive motors (1/4-300HP), covering 1E1-1E4, with features of high performance, low temperature increase, ...

Power: 1 ch - 270 ch

TECO's electric-car motors (1-270HP) feature compact size/light weight, high efficiency, and high reliability, meeting the electric-power needs of new-energy vehicles of various customers. ...