DN: 1 mm - 50.8 mm
Pressure: 5 bar - 70 bar
Temperature: -20 °C - 60 °C
The valve model TWIN has unique design that offers for high pressure applications with compressed gas two systems of slam shut for over pressure in only one body valve. It because the valve ...
DN: 1 in - 12 in
Pressure: 20 mbar - 70,000 mbar
Temperature: -20 °C - 60 °C
... For disengaging by decrease on pressure it is possible to regulate the shut-off valve from 0 to 15 bar; over matching the EN 14382 standard. The security shut-off valves are very fast disengaging, ...
DN: 1, 2 in
Pressure: 8 bar
The valve CELTIC-N is a new model developed by Gascat Engineering to use in blanketing systems. Blanketing systems is a process of using an inert gas such as nitrogen or carbon dioxide, in storage tanks to maintain a ...
DN: 50 mm - 1,000 mm
Pressure: 10, 16, 25 bar
Valves are used for an extensive range of applications and are entirely made of ductile iron with internal components in stainless steel. STANDARDS OF MANUFACTURE EN 1074-1 VALVES FOR WATER SUPPLY EN ...
ACMO S.p.A.
DN: 0.5 in - 4 in
Pressure: 150 psi
SIZE: 1/2"～4＂ JOINT END TYPE 1: SOCKET (ANSI /DIN / JIS/ CNS) JOINT END TYPE 2: THREADED (PT/NPT/BSPF) WORKING PRESSURE: 150PSI
DN: 40 mm - 300 mm
Pressure: 1.5 bar - 12 bar
Temperature: 40 °C
The main valve is a hydraulically operating diaphragm valve. The work energy is the inherent medium. Most valve types operate purely hydraulically without any ...
Hawido AG
DN: 40 mm - 300 mm
Pressure: 25, 16, 10 bar
Temperature: 40 °C
The main valve is a hydraulically operating diaphragm valve. The work energy is the inherent medium. Most valve types operate purely hydraulically without any ...
Hawido AG
DN: 40 mm - 300 mm
Pressure: 25, 16, 10 bar
Temperature: 40 °C
The main valve is a hydraulically operating diaphragm valve. The work energy is the inherent medium. Most valve types operate purely hydraulically without any ...
Hawido AG
DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h
This valve is operated by line pressure by means of a 3 way selector valve, this selector has the positions “open”, “close” and “auto”. In the “open” position the valve is fully opened, ...
A.G.P. VALVULAS 10 SL
DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h
This valve opens and closes in response to an electric signal by means of an incorporated 3 way solenoid (3/2). The signal can come from a controller, main switch, PLC, etc. Depending on the type of the solenoid the ...
A.G.P. VALVULAS 10 SL
DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h
This valve opens and closes in response to an electric signal by means of an incorporated 3 way solenoid (3/2). The signal cans com from a controller, main switch, PLC, etc. This model also incorporates a 3 way valve ...
A.G.P. VALVULAS 10 SL
DN: 20, 15, 10 mm
Pressure: 6 bar - 10 bar
Temperature: -10 °C - 140 °C
The aseptic INNOVA Mini N valve is a shut-off single seat valve suitable for any sterile use that the pharmaceutical, chemical, food or beverage industries could be required. The asepsis in the inner ...
INOXPA
DN: 25 mm - 100 mm
Pressure: 6 bar - 10 bar
Temperature: -10 °C - 140 °C
... Open lantern allows visual inspection of shaft sealing. 360º adjustable body. The valve is authorized to carry 3-A symbol. Note: Consult the options of the valves authorized to carry 3-A symbol. Parts ...
INOXPA
DN: 20, 15, 10 mm
Pressure: 6 bar - 8 bar
Temperature: -10 °C - 140 °C
The INNOVA Mini K valve is a pneumatic single seat valve. It uses to divert the product with a converging flow in sterile applications of the food, beverages, pharmaceutical or chemical industries. The ...
INOXPA
... Flow Control Valve consist of three major components the body with installed seat, the cover with bearing installed and the diaphragm assembly, it shall be the only moving element and shall form a sealed ...
Pressure: 225 psi - 400 psi
Temperature: -40 °F - 180 °F
... Reduced Port Hytrol Valve is a hydraulically operated, diaphragm actuated, globe or angle pattern valve. It consists of three major components: body, diaphragm assembly ...
Pressure: 175, 300 psi
Temperature: 180 °F
... the pilot valve must be "manually reset" in order to close the valve. The model 414-01 consists of a 100G/2100G Hytrol main valve and a small HytrolAuxiliary Valve. ...
DN: 15 mm - 150 mm
Pressure: 16 bar - 40 bar
Temperature: 250 °C
single-seat straight-way valve for high flow rates with balanced cone | highest temperatures up to 350 °C | usable for steam | body made of GS-C25 or CrNiMo-steel | steel / stainless steel, stainless-steel-diaphragm ...
DN: 4 mm
Pressure: 0 bar - 6 bar
Temperature: 0 °C - 140 °C
... all-in-one” anti-vacuum membrane solenoid valve and relief valve regulates negative pressure via an anti-vacuum membrane, with a relief valve opening in the event of ...
DN: 15 mm - 50 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 130 °C
... of the GAMMA membrane valve allows advantageous membrane support in both end positions. The optimum heat dissipation of the open membrane, which is in contact with the housing, reduces ...
DN: 0.5 mm - 5 mm
Pressure: 8, 6 bar
Temperature: 0 °C - 80 °C
In the EFC Dispensing valves, the position of the precision throttle directly connected to a stepper motor determines the flow rate. This drive technology allows the set position to be held even without power. Variants ...
DN: 1.5 in - 4 in
... Opening/closing: by 3W solenoid pilot valve •Applications : For water distribution •To remove operation of hydraulic valve by electric command Description G500-EL model valve ...
BACCARA AUTOMATION
DN: 0.75 in - 2 in
Pressure: 0.3 bar - 10 bar
Temperature: 5 °C - 50 °C
... 2″ BSPT, NPT •Diaphragm: NR •Body material: Plastic Function2 Way Ports size3/4", 1", 1-1/2", 2" BSPT & NPT Pressure range0 3 to 10bar Temperature rangeFluid : 5ºC to 50ºC (no freezing) Materials in contact with ...
BACCARA AUTOMATION
DN: 0.25 in - 0.5 in
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 80 °C
... See table Temperature rangeFluid : 5ºC to 50ºC (no freezing) Ambient : -10ºC to 50ºC Materials in contact with mediaMain Valve: Brass, Stainless Steel AISI 316 Seals: NBR MediaAir, gas, water, fuel, oil etc
BACCARA AUTOMATION
DN: 8 mm - 50 mm
Pressure: 10 bar
Temperature: 0 °C - 160 °C
Special features • - Consisting of aseptic angle valve and actuator • - USP VI diaphragm • - Plug stem guide with diaphragm seal and test connection • - Module A category according ...
DN: 40 mm
Pressure: 0 bar - 0.6 bar
Temperature: 5 °C - 90 °C
2/2-way direct acting drain valve of nominal diameter DN 40 for controlling low aggressive liquid media, such as cleaning or disinfection agents. Valves of this type are medium separated having a single ...
A. u. K. Müller
DN: 0.75 in - 3 in
Pressure: 0 bar - 17 bar
Temperature: -51 °C - 204 °C
... meet the stringent requirements of the bioprocessing industry Weirless Radial diaphragm tank valves offer solutions to the most challenging applications. It is easy to weld our valves ...
Watson-Marlow Fluid Technology Group
DN: 8 in - 16 in
Pressure: 450 psi
Temperature: 121, 111 °C
... S)ORIT evaporator regulating valves have a brass body and extended copper connections. They are available with a range of adjustable settings and pressure tap. The primary function of these valves, referred ...
DN: 0.625 in
Pressure: 100 psi - 280 psi
The Sporlan Type OROA head pressure control valves have a brass body with copper connections. These valves are nonadjustable. They perform the function of limiting flow of refrigerant from the condenser ...
DN: 15 mm - 50 mm
Pressure: 13, 25 bar
Temperature: 200 °C
... and requires no tools. (Air to open) One combination I/P positioner/actuator (I/P positioned actuator) fits all size valves, to minimize spare inventory requirements. Integrated I/P positioner design simplifies ...
Pressure: 140 Pa - 840 Pa
Temperature: 1 °C - 60 °C
Flow rate: 0 l/h - 3,408 l/h
... function are customizable. 1-60℃ higher temperature range, suitable for shower softener. Internal outlet valve and manual mixed valve available. Various injectors, DLFC and BLFC. Dual power ...
DN: 15 mm - 200 mm
Pressure: 7, 10, 16 bar
Temperature: -30 °C - 150 °C
Features •High reliability due to thick-walled PFA lining and diaphragms made of modified PTFE •Reliable as "floating" connection diaphragm to stem •Long service life: diaphragm ...
DN: 40 mm - 800 mm
Pressure: 16, 25 bar
Temperature: 80 °C
The Model 750-65 Level Control Valve with Bi-Level Electric Float is a hydraulically operated, diaphragm actuated control valve that controls reservoir filling in response to an electric ...
BERMAD CS Ltd
DN: 80, 100 mm
Pressure: 0.2 MPa - 0.6 MPa
Temperature: -25 °C - 55 °C
... compressed air of the upper chamber III of the diaphragm 3 is discharged instantaneously from the passage II on the cover 2 and the exhaust passage I on the pilot part 1. At the same time, the diaphragm ...
Zhejiang Gute Pneumatic Machinery Co., Ltd
DN: 50 mm - 300 mm
Pressure: 10, 16 bar
Temperature: 50 °C
... of variations of the inlet pressure / flow rate, the valve regulates a higher inlet pressure to a constant, lower outlet pressure - Valve controlled by its own medium - Pre-formed diaphragm ...
VAG-Group
DN: 63 mm - 90 mm
Pressure: 10, 8 bar
Cepex offers a complete range of valves for the irrigation world, including hydraulic valves, angle seat valves (in several versions), and air release valves.
Cepex SER
DN: 1.8 mm
Pressure: 1 bar - 8 bar
Temperature: 5 °C - 180 °C
Features ・This solenoid diaphragm valve employs a unique mechanism to absorb the dimensional changes of the plastic body caused by temperature changes. No leakage with high temperature fluids. ・Most ...
DN: 15 mm - 300 mm
Pressure: 4 bar - 10 bar
... lining, Halar Diaphragm valves with or without rubber coating, and different qualities of diaphragm for different media. Drip-proof closure even with suspended solids in media Universal ...
ERHARD
Please specify:
Help us improve:
remaining