- Detection - Measurement >
- Electrical Measurements >
- Cat IV clamp multimeter >
- CHAUVIN ARNOUX
CHAUVIN ARNOUX cat IV clamp multimeters
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Max DC voltage: 1,500 V
Max AC voltage: 1,000, 100 V
Max DC current: 0 A - 1,000 A
... up to 1000A, DC voltage up to 1500V and AC voltage up to 1000V in TRMS reaching CAT IV 600V and CAT III 1000V in compliance with safety standard IEC/EN61010-1. The clamp ...
HT
Max DC voltage: 400, 1,000 V
Max AC voltage: 400, 1,000 V
Max DC current: 40, 400, 1,000 A
... U1211A, U1212A, U1213A) handheld amp clamp meters (also known as clamp-on ammeters) enable high-current measurements without breaking the circuit. Plus, they provide an extra layer of ...
Max DC voltage: 999.9 V
Max AC voltage: 999.9 V
Max DC current: 599.9 A
The FLIR CM83 is an industrial-grade power clamp meter engineered with advanced power analysis, harmonics measurements, and variable frequency drive (VFD) filtering functions to meet the needs of electrical ...
Max DC voltage: 600 V
Max AC voltage: 600 V
Max AC current: 600 A
... True-RMS HVAC Clamp Meter helps HVAC technicians work more efficiently on the work site. The Fluke 902 FC Clamp Meter, with Fluke Connect wireless connectivity, can help HVAC technicians ...
FLUKE
Max DC voltage: 1 V - 600 V
Max AC voltage: 1 mV - 600,000 mV
Max DC current: 0.1 A - 400 A
... maximum flexibility ✔ Auto AC/DC ✔ Large two-line display ✔ Measures the common electrical parameters The testo 770-1 clamp meter is ideally suited for non-contact current measurement on tightly packed ...
Max DC voltage: 1 V - 600 V
Max AC voltage: 1 mV - 600,000 mV
Max DC current: 1 A - 400 A
... grab mechanism makes the testo 770-2 the perfect clamp meter for non-contact measurements on tightly packed cables with a small diameter. In addition to the standard functions of the testo 770-1 clamp ...
Max DC voltage: 1,000 V
Max AC voltage: 750 V
Max DC current: 1,500 A
... non-sinusoidal waveforms created by today’s complex loads are measured using traditional, average-sensing clamp meters. The DCM1500 is safety rated to IEC 61010-1 CAT IV 600 V, and ...
Max DC voltage: 600, 1,000, 600 V
Max AC voltage: 600, 1,000 V
Max DC current: 600, 1,000, 60, 1,500 A
... • Inrush current • Megger Link app compatible • CAT IV 600 V and CAT III 1000 V • Data logger • PV test leads with MC4PV plugs The DCM1500S solar clamp ...
Max DC voltage: 1,000 V
Max AC voltage: 1,000 V
Max DC current: 1,000 A
... • Data Hold/Min-Max/Peak Hold • Bright LED torch • CAT IV 600 V Rating • Supplied with carry case and Carrying holster/pouch The new Megger DPM1000 power clamp ...
The F201 clamp is ideal for the needs of both self-employed electricians and SME contractors in the electrical sector. Equipped with a fast 12-bit TRMS digital acquisition system, F201 clamps offer particularly ...
CHAUVIN ARNOUX
... main applications for the clamps in this series. Equipped with a fast 12-bit TRMS digital acquisition system, F407 clamps offer particularly accurate measurements. Due to their large bandwidth and high ...
CHAUVIN ARNOUX
The F203 clamp is ideal for the needs of both self-employed electricians and SME contractors in the electrical sector. Equipped with a fast 12-bit TRMS digital acquisition system, F203 clamps offer particularly ...
CHAUVIN ARNOUX
Max DC voltage: 1 V - 1,500 V
Max AC voltage: 1 V - 1,000 V
Max AC current: 1 A - 200 A
... fork • Vibration motor and sound generator for reliable feedback • Power fork opening: 14 mm • Measuring category: CAT IV 600 V, CAT III 1000 V
GOSSEN METRAWATT GmbH
The earth clamp meter can be used to test the resistance of any conductive system which demonstrates loop characteristics. Following measurings are possible: - Earth resistance measurement if grounding ...
GOSSEN METRAWATT GmbH
Earthing clamp for measuring earth loop resistance and leakage current. The earth clamp "generator and measuring clamp in one device" is used to check the resistance of any conductive ...
GOSSEN METRAWATT GmbH
Max DC voltage: 40 V - 600 V
Max AC voltage: 40 V - 600 V
Max AC current: 40 mA - 100,000 mA
The MD 9273 is the new Bluetooth-enabled expansion to the Metrel multifunctional testers MI 3155, MI 3152 and MI 3325. MEASURING FUNCTIONS • TRMS AC and DC voltage measurement • TRMS AC current measurement • Frequency measurement • ...
METREL
Max AC voltage: 40, 400, 600 V
Max DC current: 40, 400, 600 A
Max AC current: 40 mA - 100,000 mA
... sinusoidal and non-sinusoidal signals • Jaw size: 28 mm • Shielded Jaw: shielded jaw allows the clamp meter to be used in the noisiest environments • Accurate: readings of AC current with an accuracy ...
METREL
Max DC voltage: 6 V - 1,000 V
Max AC voltage: 6 V - 1,000 V
Max DC current: 200 A - 2,000 A
The MD 9250 is the first Clamp Meter that meets overvoltage category CAT IV 1000 V. MEASURING FUNCTIONS • TRMS AC, DC voltage measurement • TRMS AC, DC current ...
METREL
Max DC voltage: 0 V - 999.9 V
Max AC voltage: 0 V - 999.9 V
Max DC current: 0 A - 599.9 A
... installations The Solar Power Clamp is a feature-packed Power Analyzer designed to enable efficiency measurements, troubleshooting and maintenance of photovoltaic systems. About the Solar Power Clamp The ...
Max DC voltage: 600 V
Max AC voltage: 600 V
Max DC current: 60 A
The TRMS Clamp-On Leakage Current Meter Model 566 is designed to measure low AC currents, which are typically leakage currents in ground conductors. Low currents are measured in the 60mA and 600mA ranges. The high sensitivity ...
AEMC Instruments
CM-1560 Clamp meter with Certificate of Calibration Measures AC+DC current AC and AC+DC voltage measurements with digital low pass filter for accurate readings on variable frequency drives Also measures ...
... readings to selected FLIR thermal imaging IR cameras to incorporate meter readings with thermal images * Complete with CAT IV test leads, 9V battery, Type K probe, pouch case, and Professional Test Lead Set
Extech
Max DC voltage: 0.1 V - 1,000 V
Max AC voltage: 0.1 V - 750 V
Max DC current: 400, 200 A
safe current measuring up to 400 A AC measuring inputs for voltage, resistance, continuity and diode test integrated Volt sensor signalises phase voltages by means of an acoustic signal and a red LED signal it localizes cable breaks ...
Benning
Max DC voltage: 1,000 V
Max AC voltage: 1,000 V
CAT IV Navigator™ Power Clamp Meter 600 A (AC) TRMS Easy to use navigation for precise measurements Complete with a full range of diagnostic capabilities including ...
Max DC voltage: 1 V - 1,000 V
Max AC voltage: 1 V - 750 V
Max DC current: 2 A
... Auto-ranging Auto power off Overload protection Safety input jacks Safety test leads Safety: EN61010-1, EN 61010-2-032, CAT IV 600V, CAT III 1000V, CE approved Jaw opening capability: ...
Max DC voltage: 1 V - 1,000 V
Max AC voltage: 1 V - 750 V
Max DC current: 1 A - 2,000 A
... ranging Auto power off Overload protections Safety input jacks Safety test leads Safety: EN61010-1, EN 61010-2-032, CAT IV 600V, CAT III 1000V, CE approved Jaw opening capability: ...
Max DC voltage: 60, 600, 6 V
Max AC voltage: 6, 60, 600 V
Max AC current: 60, 600, 3,000 A
Thanks to its diverse range of measuring functions, the flexible Testboy TV 225 Clamp Meter is suitable for universal use. Useful details such as the large display, the automatic measurement range selection ...
Max DC voltage: 999.9 V
Max AC voltage: 999.9 V
Max DC current: 999.9 A
• Variable-frequency drive (VFD) V & Hz measurement. • Lo-Z voltage measurement to drain ghost voltages. • Check 3 phase sequence. • True RMS reading on AC and DC÷AC mode. • In rush current measurement. • A measurement for HVAC flame ...
Max DC voltage: 999.9 V
Max AC voltage: 999.9 V
Max DC current: 999.9 A
• Variable-frequency drives (VFD) V & Hz measurement. • LoZ voltage measurement to drain ghost voltages. • Check 3I1 phase sequence. • Moto r In rush current measurement. • True RMS reading on AC and DC+AC mode. • uA measurement ...
Max AC voltage: 1,000 V
Max AC current: 40, 400, 1,000 A
Max frequency measure: 40 Hz - 1,000 Hz
A tear drop shape jaw with the conductor size 55 mm: Convenient to use at a small-sized office and factory ・Current up to 1000A rms ・Voltage up to 1000V rms ・Harmonics up to 30th ・Various measurement functions: current, voltage, power, ...
Kyoritsu
... current. Does not take into account disturbances Accuracy of measurements from a professional TRMS multimeter with the ease of use of a 1000 A current clamp. Open jaw 52 mm Backlight LCD display with ...
... the high-voltage DC measurement capability of up to 1700 V (*1) is ideal for the clamp maintenance inspections of electrical and solar power equipment. CAT IV 600 V | CAT ...
HIOKI EUROPE GmbH
... rectified 2000A AC clamp meter that features a broad operating temperature range of -25° C to 65° C, thin and compact clamp core and optional flexible current sensor that you can attach ...
HIOKI EUROPE GmbH
AC CLAMP METER CM4141 Innovative Current Sensor Design, Easily Get Into Tight Spaces Overview Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s ...
HIOKI EUROPE GmbH
... in 4 ranges Resolution 1mV and 1V Accuracy ±(1% + 5d) Bandwith 40 to 1kHz Protection 1000V eff. • Safety: 300V - CAT IV, 600V - CAT III
SEFRAM INSTRUMENTS
600A AC / 600kW Power clamp, with Flex input, Bluetooth Model MW3516BF • Current measurement up to 600A (TRMS AC) • Current measurement up to 3000A AC with Flex (option : SP295 and SP296) • Current measurement TRMS ...
SEFRAM INSTRUMENTS
... carrying pouch Safety: IEC1010 600V CAT IV A NEW DESIGN TO PROVIDE MORE SAFETY FOR ALL YOUR NEEDS. Safety, Accuracy, Easy to use Thanks to the new design of safety, the new SEFRAM clamp ...
SEFRAM INSTRUMENTS
Max DC voltage: 0 V - 1,000 V
Max AC voltage: 0 V - 1,000 V
Max DC current: 0 A - 1,000 A
Sonel CMP-3000 belongs to the new generation of clamp meters. It combines innovation, durability and high-tech solutions. Why is it so special? Thanks to its equipment and capabilities. The standard flexible current ...
Sonel SA
Max DC current: 30, 300, 3,000 A
Max AC current: 30, 300 A
Max frequency measure: 45 Hz - 500 Hz
• Measurement Ranges: 30A/300A/3000A AC • Output Resolution (LCD Display): 0.01A/0.1A/1A • 8.5mm coil diameter allows measurement in tight spaces (Double insulated) • 10” flexible sensor fit around conductors up to 3.2”in diameter • ...
... LED, Relative/DC zero function, Auto power off, and a built-in flashlight. Data Hold freezes the display for easy viewing. CAT IV-600V safety category. cETLus listed. Includes 3 AAA batteries, test leads, ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining