- Hydraulics - Pneumatics >
- Valve >
- Plug valve >
- Clippard
Clippard plug valves
DN: 0.5 in - 2 in
Pressure: 0 bar - 13 bar
Temperature: 0 °C - 170 °C
The ADCAPure V926A is a series of single seated two-way aseptic control valves with angle connections. These valves are designed to regulate and accurately control flow of liquids and gases and are suitable ...
DN: 0.5 in - 4 in
Pressure: 16 bar
Temperature: 0 °C - 170 °C
The ADCAPure V926H is a series of single seated two-way hygienic control valves with angle connections. These valves are designed to regulate and accurately control flow of liquids and gases and are suitable ...
DN: 3.88 in
... a 300-gallon tank in less than 14 minutes. Operation The Magnum GURU® Plug has a higher discharge capacity than the standard GURU® Plug. This thermostatic drain valve responds to ...
Pressure: 207 bar
Temperature: 121 °C
... otherwise be harmed by high temperature samples. The valve responds only to temperature. Under normal operation the valve is fully open. If the sample temperature reaches 120°F, the thermal element within ...
DN: 0.5 in - 2 in
V510 Series valves are having a V shape plug to provide smooth manually adjusted flow regulation.
DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: 180 °C
QUICK-CLOSING VALVE COMBINATION TYPE KVF-KVF In view of the requirements of the European laws and regulations, KÜHME offers the proven high-performance valves as double shut-off valve ...
Kühme Armaturen GmbH
DN: 50 mm - 300 mm
Pressure: 40 bar
Temperature: 180 °C
QUICK-CLOSING VALVE COMBINATION TYPE KVH-KVH In view of the requirements of the European laws and regulations, KÜHME offers the proven high-performance valves as double shut-off valve ...
Kühme Armaturen GmbH
DN: 50 mm - 400 mm
Pressure: 6, 25 bar
Temperature: 200 °C
2D MIXING VALVES – TYPE ZDM Fully automated mixing valve for a selective gas quality control with simultaneous control of the flow rate. The application area of the ZDM mixing valve ...
Kühme Armaturen GmbH
Plug valves KLINGER plug valves operate with the same principle used by ball valves. They feature cylindrical or conical “plugs” ...
DN: 0.375 in
DN: 50 mm - 60 mm
Specifications Valve types • regulating valve, elbow regulating valve • fine regulating valve, elbow fine regulating valve • taper seat non-return ...
DN: 0.25 in
Pressure: 1,000 psi - 5,000 psi
Flow rate: 5 us gal/min
Valves are adjustable: 1,000 to 5,000 psi Features Pressure reducing valves are designed to reduce the maximum pressure in a portion of a hydraulic circuit: the valve is open from ...
DN: 15 mm - 80 mm
Pressure: 10 bar - 400 bar
Flow rate: 0.1 m³/h - 6.3 m³/h
... limited by the design of the valve. The valve seat and plug are made of ceramic or solid stellite materials, the mechanical performance of which assures high durability of the product. We ...
Zaklady Automatyki POLNA S.A.
Pressure: 530, 630 bar
... class 15000. The valves have a guaranteed V class plug/socket closure class V at a full pressure drop of 530 bar, therefore the medium inflow is directed over the plug (FTC). The ...
Zaklady Automatyki POLNA S.A.
DN: 300 mm
Pressure: 100 bar
... directional valves are applied in gas engineering in case of a change in fluid flow direction in the installation. Basic design comprises passage cage valve DN300, PN100, Kv1350. The plug ...
Zaklady Automatyki POLNA S.A.
DN: 25 mm
Temperature: 110 °C
Seat valve 25, made of stamped brass. With 110º output and 1 “threads.
DN: 2.5 in
Seat valve, threads Female – Female 2½ “and Male – Male 2½”.
DN: 2 in - 16 in
DBB Expanding Plug Valve Provider: Double Block and Bleed Plug Valves, 2-16 Inch, Class 150-600 LB, API 6D, ASME B16.34, API 599, Full Venturi Port, Blowout-proof Stem. Expanding ...
DN: 0.5 in - 60 in
Pressure: 16 bar - 420 bar
Temperature: -29 °C - 180 °C
... Seat Lubricated Plug Valve Supplier: Metal Seated Lubricated Plug Valves, 1/2-60 Inch, Class 150-2500 LB, PN16-PN420, API 6D, API 594, ASME B16.34. Lubricated Plug ...
DN: 0.5 in - 12 in
Pressure: 0 psi - 250 psi
Temperature: -29 °C - 160 °C
Lined Plug Valve Manufacturer: Full Body Lined Plug Valves, PTFE, FEP, PFA, 1/2-12 Inch, Class 125 LB, 150 LB, PN6, PN10, PN16, 250 PSI, ASME B16.42, Teflon Lining Materials. Med ...
Pressure: 400 bar
Choke valve is a kind of control valves, mostly used in oil and gas production wells to control the flow of well fluids being produced. Choke valves allow fluid flow through a very ...
... the boiler safety valve given as the valve opens in cases of excessive HP line pressure. Noise level guaranteed in accordance with VDMA 24422 regulations. Complete hydraulic units and servo systems ...
DN: 100 mm
... hydrochloric acid, sulfuric acid etc), plug valve bodies are completely lined with PTFE, PVDF, PVDC, polyethylene, polypropylene or similar coatings. Types of Plug Valves Plug ...
DN: 25 mm - 100 mm
Pressure: 10 bar
Temperature: -10 °C - 140 °C
The INNOVA N-Type valve is a pneumatic shut-off seat valve for hygienic applications. The valve is authorized to carry 3-A symbol. Note: Consult the options of the valves ...
INOXPA
DN: 10, 15, 20 mm
Pressure: 6 bar - 8 bar
Temperature: -10 °C - 140 °C
The INNOVA Mini N valve is a shut-off single seat valve suitable for any use that the pharmaceutical, chemical, food or beverage industries could be required. Hygienic design according to EHEDG. Gasket ...
INOXPA
DN: 25 mm - 100 mm
Pressure: 6 bar - 10 bar
Temperature: 140 °C
The L type valve is a pneumatic divert single seat valve with diverging flow designed for hygienic applications. The plug is specifically designed to manage diverging flows, given that ...
INOXPA
DN: 0.5, 0.25, 0.125, 0.375 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
Stopper valve pneumatically actuated, G 1/8, Plug connector 6/4, For high-speed positioning and stop functions as well as emergency switching (e.g. emergency stop). If a control signal is present at ...
RIEGLER & Co.KG
DN: 6, 8 mm
... , taking into account the applicable regulations and standards. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must ...
... their reliability and economic efficiency they are applied by the million. Operating Principle AB-Cocks A cylindrical cock plug and an elastic packing sleeve enable a fast opening and closing over a 90° movement. ...
DN: 25 mm - 200 mm
Pressure: 102 bar
Temperature: -20 °C - 60 °C
PVS 782 PVS type slam shut valves are pilot-operated relief valves in which the opening and the closing of the main plug is controlled by a pilot device which is very sensitive to ...
DN: 1 in - 10 in
... by soft-seated patented Fiorentini design • Very high rangeability due to special plug guiding (1:500) • The actuator design has a special balanced valve plug for minimum actuator ...
Injection control valve Tasks Injection control valves are primarily flow control valves, which means they supply the required amount of cooling water to the point of use. The pressure ...
Pressure: 60 bar - 280 bar
Flow rate: 40 l/min
... - Technical information - Minimum purity of the medium: ISO 4406 19/17/14 (NAS 8) A and B versions with check valve - Height - 40 mm - Pressure range - 60 - 280 BAR - Flow - Max. 40 l/min
DN: 15 mm - 100 mm
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 220 °C
Special features • - Consisting of on/off valve and actuator • - Tight shut-off for liquids, non-flammable gases, and steam • - Optionally including RFID transponder with unique marking according to DIN SPEC 91406 Accessories ...
SAMSON
Pressure: 25 psi - 125 psi
... control valves are compact 1/8" ported 4-way valves that may be actuated by hand, remote air signal, electric signal, or mechanically by a machine element. LTV valves are ideal for powering ...
Bimba
DN: 2 in - 8 in
Pressure: 15,000 psi
Temperature: -46 °C - 177 °C
Cameron’s first nonretrievable subsea choke was installed in 1975, and with more than 800 of these rugged chokes installed to date, they continue to demonstrate that they are a proven, reliable choice. Permanently mounted to a subsea ...
DN: 32, 40, 25 mm
Pressure: 52 bar
Temperature: -60 °C - 120 °C
... environments. The valve's weld-in feature design reduces potential for connection leaks. This design has a higher working pressure, a greater working temperature range and higher flow capacities than competitive products. ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining