DN: 0.25 in
Temperature: -30 °C - 80 °C
... Flow control 90° (bidirectional) Fluid Temperature: -30°C (-22°F) to 80°C (176°F) Female Thread: 1/4 ...
DN: 3.88 in
... a 300-gallon tank in less than 14 minutes. Operation The Magnum GURU® Plug has a higher discharge capacity than the standard GURU® Plug. This thermostatic drain valve responds to the engine coolant ...
Pressure: 207 bar
Temperature: 121 °C
... otherwise be harmed by high temperature samples. The valve responds only to temperature. Under normal operation the valve is fully open. If the sample temperature reaches 120°F, the thermal element within the valve ...
DN: 0.125 in
Pressure: 25 psi - 125 psi
Temperature: -18 °C - 46 °C
... control valves are compact 1/8 ported 4-way valves that may be actuated by hand, remote air signal, electric signal, or mechanically by a machine element. LTV valves are ideal for powering small or medium ...
Bimba
DN: 2 in - 8 in
Pressure: 15,000 psi
Temperature: -46 °C - 177 °C
... Cameron’s first nonretrievable subsea choke was installed in 1975, and with more than 800 of these rugged chokes installed to date, they continue to demonstrate that they are a proven, reliable choice. Permanently mounted to a subsea structure such ...
DN: 10 mm - 50 mm
Pressure: 25 bar
Temperature: 0 °C - 120 °C
... thread as per DIN/EN ISO 228-1 Flat-sealing regulating valve Differential pressure across the control unit is kept constant; valve authority 1 Valve body and plug made of dezincification-resistant ...
Pressure: 210 bar
Flow rate: 20 l/min
... The Leak Free Solenoid Valve is specifically designed to provide a good quality performance and functionality. It is built with a sub-plate or screw-in, two-way, poppet style normally used to cut off the hydraulic power. It is also available ...
DN: 50 mm - 200 mm
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 150 °C
... combination with the flushing chambers prevent any contact of the product with the environment. On the inside of the valve, the self-draining valve housing with single-seat, leakage chamber and balancer cleaning allow ...
DN: 15 mm - 150 mm
Pressure: 16 bar - 40 bar
Temperature: 0 °C - 220 °C
... 2/2-Way Motorised Control Valves with Electric Actuator for On-Off and Control Application (Motorised to open or Motorised to close type) DATA SHEET MV-5512A/B Fluid: Air, Water, Steam, Gas ...
Avcon Controls PVT. Ltd.
DN: 1 in - 9 in
... D-AM automatic valves are self-contained with flow actuated overspeed shutdown. They require no external electrical or mechanical input devices. The closing force is provided by the intake air flow passing through the valve. ...
AMOT
DN: 0.375 in - 0.75 in
... Lever Manual Valves 31 Series are hand controlled poppet valves, for the control of single or double-acting air cylinders. These valves are offered with horizontal or vertical hand lever, 4-way 3-position, ...
DN: 15 mm
Pressure: 16 bar
Temperature: 10 °C - 60 °C
... • Flow rate regulator valve. • 100% factory tested. • A cone closing system on top of an EPDM O-Ring. • Connections: 3 pieces union, solvent female, solvent male and male threaded. • Minimal pressure drop. • Easy disasembling. • ...
Pressure: 1 bar - 8 bar
Temperature: -10 °C - 60 °C
Flow rate: 500 l/min
... The type "XVF4" identifies a 3/2 N.C. amplifier valve that changes low pressure signals into pneumatic signals (1 ÷ 8 bar). Valve type "XVF5" is instead a 3/2 N.O. amplifier valve that changes negative ...
DN: 0.25 in
Pressure: 1,000 psi - 5,000 psi
Flow rate: 5 us gal/min
... Valves are adjustable: 1,000 to 5,000 psi Features Pressure reducing valves are designed to reduce the maximum pressure in a portion of a hydraulic circuit: the valve is open from the inlet to the ...
DN: 0.5 in - 4 in
Pressure: 16 bar
Temperature: 0 °C - 170 °C
... The ADCAPure V926H is a series of single seated two-way hygienic control valves with angle connections. These valves are designed to regulate and accurately control flow of liquids and gases and are suitable for hygienic ...
DN: 0.5 in - 36 in
Temperature: 80 °C
... flanged, or butt welded. Athena pressure balance plug valve is a type of lubricated plug valve, its products rational structure, reliable sealing, excellent performance, aesthetically ...
Athena Engineering S.r.l.
DN: 1.813 in - 7.063 in
Pressure: 140 MPa
... Whether it is for ball drop, plug and perf, coil fracking, or conventional fracking, Or OEM configuration, Qinghe is capable to provide API 6A frac head, goat head, fracturing wellhead for fracturing tree as per the required specification.to ...
Pressure: 60 bar - 280 bar
Flow rate: 40 l/min
... - Technical information - Minimum purity of the medium: ISO 4406 19/17/14 (NAS 8) A and B versions with check valve - Height - 40 mm - Pressure range - 60 - 280 BAR - Flow - Max. 40 l/min ...
DN: 10 mm - 100 mm
Pressure: 0 bar - 160 bar
Temperature: -20 °C - 220 °C
... normally closed or normally open with spring. Double acting type are on request. Positioner addaptable bracket is on request. Plug design can be design according to your flow Cv/Kvs with sensetive accuracy by parabloic design. AS10 Serie ...
DN: 15, 20 mm
Pressure: 16 bar
... Body: Stamped brass CW617N Shaft: Brass CW614N Fitting: Stamped brass CW617N O-rings: NBR 70 SH Plug: Vulcanized brass EPDM 70 SH Seat: polyacetal Complies with all the specifications UNE 19804 Test ...
Baterias Gatell S.A
DN: 24 in - 36 in
... DeZURIK’s stocks 24-36” Cast Iron PEC Eccentric Plug Valves with Mechanical Joint (MJ) end connections and NBR plugs. Manual actuators are configurable with handwheel or 2” nut. The interiors and exteriors ...
... 0.375-24 UNF Purging Valve The BLD9243 Purging Valve provides a tire valve core in a lightweight minimum length housing. This valve may be used to purge or pressurize containers. See ...
DN: 15 mm - 80 mm
Pressure: 10 bar - 400 bar
Flow rate: 0.1 m³/h - 6.3 m³/h
... limited by the design of the valve. The valve seat and plug are made of ceramic or solid stellite materials, the mechanical performance of which assures high durability of the product. We can adjust ...
Zaklady Automatyki POLNA S.A.
... stainless steel mesh strainers will protect the check valve and also the dispenser internals. Our High Flow under pump valves are the leading valves in the market and as well as selling to OEM's for ...
DN: 2 in - 14 in
Pressure: 70 bar
Temperature: 260 °C
... operating cycles High-performance valve with a long service life H2-ready OPERATION DETAILS The linear movement of the valve stem is generated by a strong pneumatic actuator which is energized by a solenoid valve. ...
Kühme Armaturen GmbH
the best suppliers