- Robotics - Automation - Industrial IT >
- Automation >
- I/O module >
- CONTEC
CONTEC I/O modules
The xtremeDB -1 (pronounced: "dash one") CANopen module combines many different I/O signal configurations. It offers a total of eight inputs, up to four of which can be parameterized in analog mode. Two ...
... the same time, the module offers 14 digital outputs, most of which can be configured as PWM or PWM(i). The maximum output current of 7 A is sufficient to control even actuators with high power. Fully potted IP69K CANopen ...
Our comment on "xtremeDB 8 inputs 8 outputs, SAE J1939" The xtremeDB -1 (pronounced: "dash one") SAE J1939 module combines many different I/O signal configurations. It offers a total of eight inputs, ...
The QE-8DI is a slave module with n°8 digital inputs. Thanks to the presence of the RS485 serial port it can perform advanced functions such as I/O module with Modbus RTU protocol. The ...
qeed
The RIO40S remote I/O module, based on a CANopen architecture, ensures fast and reliable communication. Ultra compact, it can be easily integrated into any type of cabinet or electrical cabinet. Thanks ...
SERAD
... acquisition modules, which are also called distributed IO modules, IO modules, data acquisition cards, data loggers, and IO cards. FEATURES ...
BRAINCHILD ELECTRONIC CO., LTD
... Central, using local I/O bus of CPU module. Up to ten I/O modules can be connected to the CPU. Decentralized periphery via fieldbus between CPU module ...
ABB Automation Products GmbH
... and Serial. The parallel modules (I-8K Series) are high-speed modules and support MCU (Main Control Unit) only. The serial modules (I-87K Series) can support either MCU or I/O ...
In automation technology, switching systems are local connections between periphery and superior control. Pulsotronic offers a wide range of M5, M8 and M12 switches with its corresponding connectors.
8 Digital Inputs, 8 Digital Outputs and an RS485 Gateway Port Control any input or output from TTL to high voltage high current industrial devices Factory floor process control and automation, Integrated DIN rail mount Supports simple ...
Brainboxes
The DAT 3011 device is specially designed to acquire RTD or Tc sensors, mV, V or mA input signals connected to the universal analog input. It is also capable acquire up to 3 digital inputs and to drive one solid-state relay and two SPST ...
DATEXEL SRL
This module is an external board assembled on a DIN rail with: 8 digital contact relay outputs, with several functions like: level indication or alarms (setpoints), barriers and traffic lights control atweighbridge, ...
Grayhill offers I/O modules in the industry standard sizes of mini, standard and G5. Grayhill also offers its unique Open-Line style I/O module that offers two input/output ...
... Discrete output channels have user configurable default output states which are set up on power up or module reset. In addition to performing standard discrete I/O, the four channels on the MAQ20-DIOH ...
... user configurable default output states which are set up on power up or module reset. In addition to performing standard discrete I/O, the channels on this digital input / output module ...
... suite of 17 E3 I/O modules offer up to 34 mixed I/O points to meet varying requirements. Add high-density I/O to our award-winning Graphite® HMIs or deploy in remote ...
Red Lion's Sixnet series EtherTRAK®-2 Ethernet enabled I/O modules provide simple and secure remote monitoring for deployments in harsh environments. EtherTRAK-2 offers a low cost per I/O ...
... outputs: 16 Configurable interrupt inputs Galvanic isolation from system Status display for each channel via LED The digital input / output modules DIO216/x and DIO232 can be used to ...
BACHMANN
... safety. All of the I/O module’s transmission channels are conductively connected to each other. The ANTARES 8AI Remote I/O Module is operated by and supplied with power ...
BARTEC
... industry’s first multiprotocol I/O device for PROFINET, EtherNet/IP and EtherCAT protocols Connect more field devices in a daisy-chain with the industry’s only I/O module powerful ...
... variants: – 8 and 16-way digital universal module with inputs and outputs – 4, 8 and 16-way digital input modules – 4, 8 and 16-way digital output modules – 4, 8 and 16-way digital ...
Power Supply - 24 VDC Permissible Range - 20.4 - 27.6 VDC Power Consumption - 3W Dijital Inputs Nominal Input Voltage - 24 VDC Input Voltage - For Logic 0 - For Logic 1 10 VDC Input Current - 6mA max. Input Impedance - ...
The Ethernet system with 16 digital I/O MSX-E1516 has 16 digital inputs/outputs with status LEDs, 24 V, and 1 digital 24 V trigger input. The inputs and outputs can be parameterised as paris of inputs our outputs and ...
... acquisition runs Inputs for strain gauges 1 counter input 4 inputs for strain gauges, diff, 24-bit 2 digital I/O, 24V Easy configuration : Easy mode
The Ethernet system for pressure measurement MSX-E3311 has 16/8 differential inputs, 24 bit, for the connection of straing gauges and a digital trigger input, 24 V. Up to 8 channels can be acquired simultaneously. The system was developped ...
Multi-Function I/O Module ● 4 Channels Analog input ● 2 Channels Analog output ● 4 Channels Digital input ● 4 Channels Digital output ● All Digital input channels can be used as 32 bit counters ● ...
Protech Systems
8 Channels Digital Input and 8 Channels Digital Output I/O Module ● 8 Channels Digital input ● 8 Channels Digital output ● All Digital input Channels can be used as 32 bit counters ● Support over ...
Protech Systems
5 Channels Digital Input and 6 Channels Relay Output Remote I/O Module ● 5 channels Digital input ● 4 channels Power Relay output and 2 channels Signal Relay output ● All Digital input channels ...
Protech Systems
> Inputs: 8 PNP, 24V 20mA > Outputs: 4 PNP, 24V 0.8A > Temperatures: the correct functionality of the node has been verified in a temperature range between 0 and 70 ° C > Power supply: 24V (18-36V) - 0.5Adc > Electrical Insulation: ...
ELCO Elettronica di A. Ligabue e C. snc
> Inputs: 4 PNP, 24V 20mA > Outputs: 8 PNP, 24V 0.8A > Temperatures: the correct functionality of the node has been verified in a temperature range between 0 and 70 ° C > Power supply: 24Vdc (18-36V) - 0.5Adc > Electrical Insulation: ...
ELCO Elettronica di A. Ligabue e C. snc
> Inputs: 12 PNP, 24V 20mA > Temperatures: the correct functionality of the node has been verified in a temperature range between 0 and 70 ° C > Power supply: 2V (18-36V) - 0.5Adc > Electrical Insulation: the inputs, outputs, and communication ...
ELCO Elettronica di A. Ligabue e C. snc
Digital mix modules for the 300 series Input / Output module digital for 300 8x IN / 8x OUT The module has 8 inputs and 8 outputs. General information Order number700-323-1BH01 ...
The TBSPT8-DR is a precision 8 – channel PT100/PT1000 interface. Measurement and configuration is controlled via SDI-12 commands. The interface is equipped with 4-wire inputs, matched noise filters, surge- and over voltage protection. To ...
ZLAN6002 Remote IO Controller is an intelligent device developed by Shanghai ZLAN of digital input output and analog quantity input based on RS485. The remote IO controller can conveniently connect to ...
Shanghai ZLAN Information Technology Co.,Ltd
ZLAN6042 Remote IO Controller is an intelligent device developed by Shanghai ZLAN of digital input output and analog quantity input based on Ethernet or RS485. The remote IO controller can conveniently ...
Shanghai ZLAN Information Technology Co.,Ltd
ZLAN6802 is 8 channels remote IO controller launched by Shanghai ZLAN after ZLAN6042. The controlled channels from 4 channels of 6042 extending to 8 channels, including 8 channels Digital Input(DI), Digital Output(DO), ...
Shanghai ZLAN Information Technology Co.,Ltd
The DAXIO3410E contains a versatile set of I/O channels and a Ethernet interface with different communcation stacks: 32 bit controller 4 digital in/out channels 16 digital input channels (6 digital inputs optionally ...
MEN Mikro Elektronik
... current (±20 mA) or resistive measure-ments (10Ω…5kΩ). All I/O channels, digital and analog, are galvanically isolated from the internal logic and the Ethernet interface. Additionally, the I/O module ...
MEN Mikro Elektronik
The DXIO0808C is a remote I/O with 8 digital inputs and 8 combined input/outputs that is controlled via a CAN interface. The combined inputs and outputs are software configured and may be used as I/O ...
MEN Mikro Elektronik
... processor module and up to 10 I/O modules in a compact mechanical enclosure - Distributed topology In this topology the Controller is integrated by the central system expanded with ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining