DELTA NEU centrifugal fans

WB is a plenum box for supply air intended to achieve a stable flow to rectangular front plates or grilles. WB is equipped with an adjustment damper and pressure measuring device. The plenum box can be connected from the side or the back. ...

Air flow: 6.39 m³/min
Diameter: 133 mm
Rotational speed: 4,150 rpm

Frame thickness [mm] 91 Frame material Aluminum Rated voltage [V] 24 Operating voltage range [V] 20.4～27.6 Rated current [A] 1.2 Rated input [W] 28.8 Max. static pressure [Pa] 395 Max. static pressure[inchH2O] 1.59 Operating ...

Air flow: 548 m³/h - 1,597 m³/h
Noise level: 84 dB - 90 dB

... FEATURES & ADVANTAGES: • Available in three models offering 560-940 cfm (951-1,597 m3/hr) • Direct-drive 3,500 RPM fan motor • Cast aluminum fan and housing provides spark-resistant construction • ...

... deflector The Woods Induction Thrust range is the super low profile car park ventilation and fire safety fan. Induction fans use a centrifugal blower with factory fitted inlet bell ...

The motor is fixed to the mounting plate and the entire fan is fixed to the extension of the motor shaft end. The impeller is made of 12 backward curved arc blades, front disc and rear disc. Backward curved arc blades ...

Air flow: 0.08 m³/min - 0.96 m³/min

DC fan motors driven by DC voltage rotate fans to cool the inside of home electrical appliances and other office automation (OA) equipment and exhaust the heat outside. DC fan motors ...

Air flow: 0 ft³/min - 140,000 ft³/min

New York Blower Tubular AcoustaFoil™ Fans combine the efficient performance of centrifugal airfoil wheels with the versatility and compactness of axial-flow fan design. Uses include industrial/process ...

Air flow: 815 m³/h - 7,500 m³/h

Casing See "general information", page 194. Impeller Forward curved high output centrifugal-impeller, made from galvanised sheet steel, mounted directly to the motor shaft. High efficiency, low noise level, aerodynamicly ...

Air flow: 0 m³/h - 4,000 m³/h

ACI’s most established and comprehensive range of curved forward bladed centrifugal fans. These fan units are available in a variety of designs including 1 and 3Ph; 400Hz; and ATEX/CSA ...

Air flow: 2,500 m³/h - 15,200 m³/h

... Blades with multi-arc design, high fan efficiency and low noise; 2) Impeller material, 5052-H32, light weight, reduced inertia and low vibration noise; 3) High efficiency outer rotor motor suitable for centrifugal ...

Air flow: 9,101 m³/h - 29,986 m³/h
Rotational speed: 970 rpm - 1,460 rpm

• Centrifugal roof fan for direct or ducted air extraction of commercial and industrial buildings. • Horizontal air outlet. • Low noise level. • Housing made of galvanised sheet steel. • Plastic weather ...

Diameter: 900 mm - 1,600 mm

... galvanized steel construction • Standard versions with diameters from 900mm to 1.600mm and powers up to 90kW. The JET series fans are available in both straight and angled version for the best compromise between size, ...

Air flow: 1,200 m³/h - 2,600 m³/h

REMKO RTV SERIES High-performance fans with turbo fan Compact and powerful, universally usable The combination of a powerful radial fan and thoroughly conceived accessories ...

Air flow: 1,000, 1,450 m³/h
Noise level: 76, 83 dB

Centrifugal aspirators suitable for explosive atmospheres. They are ideal for air and fumes expulsion in medium or long ducts with a temperature of 70°C maximum. Furthermore, they are used for applications where forced ...

Air flow: 2,900, 4,300 m³/h

• Stationary Exhaust Fan volute with acrobat arm. • It is used in workshops where there is no need for filters and space restrictions. • Fully compliant with European machinery safety regulations. • Designed for extracting ...

Air flow: 21,000 m³/h

The radial air stream fan AIR 5 is designed for vehicle cooling and prevents heat accumulation on vehicles. The universally applicable air stream blower is designed for cooling cars, trucks and motorcycles ...

Air flow: 150 m³/h - 13,500 m³/h
Diameter: 125 mm - 400 mm

The Colasit CMVpro® plastic radial fan sets new standards in efficiency of plastic fans and achieves a noticeable reduction in your operating cost, even compared to the best competitors. ...

Air flow: 750 m³/h - 960,000 m³/h

... grade ra­dial fans to trans­port clean or ex­haust air, chips and fi­brous ma­te­r­ial as well as ag­gres­sive and ex­plo­sive gas mix­tures. Over the years, we have cre­ated and per­fected a com­pre­hen­sive pro­gram ...

Air flow: 1,700 m³/h - 19,000 m³/h

Andrews Ventilation hire offers an extensive range of ventilation and extraction fans for hire or sales from our network of depots located throughout the UK. The FV range of heavy duty, high capacity units have been marketing ...

Air flow: 300 m³/h - 15,000 m³/h

Sustainable and efficient roof fan for air extraction The Mark MDV BLUE roof fan is suitable for extracting air from buildings and features the latest developments in the field of fans, ...

... reinforced polyester (GRP) material impeller. The impeller is backward or forward. The fan is driven directly by an ATEX certified motor. Type CFDB centrifugal fan is typically used ...

Air flow: 120 m³/h - 2,100 m³/h

... cooling fan and 150° C with cooling fan. ErP: these fans are covered by Directive 2009/125/EC. This law does not apply in the following cases: - Operation in potentially explosive ...

Diameter: 175 mm
Rotational speed: 2,500, 2,600 rpm
Noise level: 60, 62 dB

• Impeller material: PA plastic + 30% glass fiber • Direction of rotation: clockwise, seen on rotor • Type of protection: IP44 • Insulation class: B • Mode of operation: continuous operation (S1) • Bearing: ...