- Hydraulics - Pneumatics >
- Pump >
- Pneumatic pump >
- Dropsa
Dropsa pneumatic pumps
Flow: 18 l/min
... heavy-duty solution for medium to large workshops or mobile applications. Stub pumps are best suited for wall or remote mounting. Technical Specifications 10:1 ratio pump for medium flow / very long ...
Flow: 18 l/min
... drum pump has the same performance as the R-SERIES, R1000S stub pump but with the extended suction tube included. Suits 205L drums. Technical Specifications 10:1 Ratio Pump for medium ...
Flow: 57 l/min
Pressure: 10 bar
... applications of low viscosity fluids, diesel, non aggressive fluids, short distances without reels. Needle valve for regulating pump speed is included. Designed for quiet and reliable operation and for 200l drums, spout ...
Flow: 189 l/min
Pressure: 1.4 bar - 8.6 bar
Head: 8.8 m
The polypropylene diaphragm pump is built with the highest quality precision parts. Long lasting even when used with abrasive fluids, making this product very cost effective. Professionals turn to this pump ...
Flow: 11.4 l/min
Pressure: 75 bar
The Unitor 10:1 Hydra-Clean chemical pump is ideal for a majority of fluid handling tasks onboard. Delivered ready to use and includes strainer, hoses, spray gun and nozzle. Pumps are designed to be mounted ...
Flow: 7 l/min - 40 l/min
Pressure: 2 bar - 8 bar
Input diameter: 90, 80, 48 mm
The full-flow pumps of the TF series for wells produced by DIMACO S.a.s., make it possible to operate without need to external controls or sensors. The pumps are in fact able to check inside the fluid ...
... also used in the transfer of recycled powder enamel with a recycling system. Please contact us for Strong3000 enamel transfer pump spare parts.
Flow: 84.9 l/min
Pressure: 2.07 bar
Power: 350 W - 388 W
Oil-less, non-lube piston and cylinder Permanently lubricated bearings Stainless steel valves Lightweight cast aluminum components Long-life, high performance piston seal Thin wall, hard coated aluminum cylinder ...
Gardner Denver Thomas
Flow: 0.92 l/min - 18 l/min
Pressure: 4, 2 bar
Fluid temperature: 5 °C - 40 °C
Close-coupled industrial pump with 620RE LoadSure® element pumphead 621F/RE, 62VI/RE, 621I/RE, 621FX/RE: 0-2 bar IP55 pumps fitted with LoadSure® tubing element pumpheads 621 close-coupled pumps ...
Flow: 7.5 l/min
Pressure: 580 bar
Weight: 55 kg
... sealing performance, even with contaminated "dirty" air environments for long life without repair. Reduced Icing - Large air porting design provides efficient use of compressed air ...
GRACO
Flow: 5 l/min
Pressure: 100 psi
Fluid temperature: 5 °C - 45 °C
... connections with push-in fittings Applications: • Point-of-Care Testing • Nucleic Acid Purification • Air Over Liquid • Pneumatic Actuation • Microfluidic Chips
Flow: 0.95 l/min - 7.57 l/min
Pressure: 207, 103 bar
... Nordson® Model 64B pump is a positive-displacement, demand-type pump designed to operate multiple guns at mid-range volume or a single gun in high-volume applications of high viscosity materials. Lower ...
Flow: 50 l/min
Pressure: 6 bar
Fluid temperature: 65 °C
... new pneumatic, double diaphragm pump from Sames designed for low-pressure circulating systems, capable of feeding multiple guns. Sames is proud to introduce the new 3.5:1 pump into our ...
SAMES KREMLIN
Flow: 8 l/min - 135 l/min
Head: 10.5, 11.5, 14.2, 20.3 m
Power: 10 W - 265 W
Corrosion resistant, compact magnetic drive pumps Features of MD-F / MD-V series Superior corrosion resistance Manufactured mainly from superior corrosion-resistant CFRETFE, the pumps ...
IWAKI
Flow: 480 l/min
Pressure: 8 bar
Fluid temperature: 100 °C
Diaphragm pump in aluminum series AAB-112 with membranes in EPDM, balls and seats in acetal FLUIDSFRESH OIL | WATER | DIESEL FUEL SECTORSAERONAUTIC | AGRICULTURE | AUTOMOTIVE | LUBE TRUCK AND INDUSTRIAL VEHICLE | ...
RAASM SpA
Flow: 0 l/min - 0.3 l/min
Pressure: 2,000 psi - 10,000 psi
... Series D continuous-flow systems couple two pump modules to a single controller, and use an active or passive valve manifold to provide non-stop, continuous feed of almost any fluid. The controller refills one pump ...
Flow: 21.5 l/min
Pressure: 3 bar - 8 bar
Fluid temperature: 18 °C
... time. MAIN FEATURES The PIUSI P3.5:1 oil transfer pump is characterized by a solid protective and soundproofing structure. PIUSI P3.5:1 is equipped with a pneumatic exchanger and a three-stage air ...
PIUSI
Flow: 11 l/min - 17 l/min
Pressure: 2 bar - 8 bar
Head: 0 m - 80 m
... designed and constructed in Italy ■ PATENTED stall-prevention pneumatic circuit ■ Operates with non-lubricated air ■ SELF-PRIMING ■ Dry operation ■ ATEX certification for ZONE 1 - ZONE 2 ■ Adjustable ...
DEBEM SRL
Flow: 7 l/min
Pressure: 6 bar
Head: 60 m
... double-diaphragm pump gives process managers a versatile solution to almost any chemical dosing or liquid transfer application. Free of electrical components, Duotek can be fully submerged without any affect on performance, ...
SEKO
Pressure: 5 bar - 8.5 bar
Fluid temperature: 0 °C - 49 °C
... filter/regulator/lubricator) to control air to recommended operating range. Normally, the air-operated Airmatic is used with a 3/2-way electrical solenoid valve (optional) to control and vent shop air ...
Flow: 0.3, 0.5, 1, 2 l/min
Pressure: 1,000, 670, 250, 160 bar
... supercritical fluids such as CO2 (with mounted pump head cooling device)metering against constant pressureThe delivery flow rate depends on the compressed air supply and the back pressure ...
Flow: 70 l/min - 100 l/min
Head: 6 m - 12 m
Power: 420 W
Product Details Pump Tube Material: PP Pump Shaft Material: Hastelloy Pump Pipe Length: 1200 or 1000 mm Diameter of Pump Pipe: 41mm Sealing: Non-seal, exact solution! ...
Ekin Industrial
Flow: 0 l/min - 50 l/min
Pressure: 0 Pa - 12,000,000 Pa
Pneumatic pump units with a mechanical limit switch.
... . T6000 SERIES PUMPS Features 6 inch air cylinder Available in 9 different pump ratios 2.5 inch pump stroke Maximum operating pressure of 58,000 psi (4000 bar) Maximum ...
HIP
Flow: 10 l/min
Pressure: 16 bar
Fluid temperature: 10 °C - 60 °C
PNEUMATIC PUMP FOR FRESH OIL REMOTE OIL EQUIPMENT TPKE, LEGALLY CALIBRATABLE This pneumatically-driven piston pump is used for the conveying of lubricants and similar fluids when the ...
HORN GmbH & Co. KG TECALEMIT
Flow: 75 l/min
Pressure: 0 bar - 8.4 bar
Head: 84 m
DİAPUMP POMPA ve MAK. SAN. TİC. LTD. ŞTİ.
... indefinitely. It cannot air bind, has no stator to burn out, and no seal to fail. The ODS Pump is adjustable while in operation for maximum flexibility of both the capacity and discharge pressures. The ...
Flow: 8.4 l/min
Pressure: 21 bar
Air operated 3:1 diaphragm pump The Binks DX200 3:1 pump has been designed to perform in tough spray gun, system or transfer applications. Higher fluid pressure with constant low ...
Binks
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining