Dunkermotoren brakes

Torque: 10 Nm - 50 Nm
Braking force: 290, 375 N

Ringspann's DH 010 FPM Brake Calipers sport machine mounting capabilities at right angles to the brake discs. They showcase spring-activated functions, pneumatic-release systems, and manual adjustment ...

Torque: 250 Nm - 1,700 Nm
Braking force: 2,600 N - 9,300 N

Brake Caliper DH 025 FPA Features - Mounting to the machine at right angles to the brake disc - Spring activated - Pneumatically released - Manual or automatic adjustment to counter friction ...

Torque: 4,900 Nm - 38,500 Nm
Braking force: 24,000 N - 65,000 N

The DU 060 FPM series is manufactured by Ringspann, and is a brake caliper that can be mounted and can be equipped in either parallel or at right phase to the brake disc. It is spring actuated and pneumatically ...

Torque: 150 Nm - 7,000 Nm
Braking force: 0 N - 0 N
Rotational speed: 150 rpm - 400 rpm

... activated? The FPC safety brake is activated when the rate of descent exceeds a preset value, generally between 30% and 50% above the rated speed of the application. This device uses centrifugal force to lock the ...

Torque: 130, 45, 260 Nm
Rotational speed: 0 rpm - 15,000 rpm
Power: 4,500, 12,000, 24,000 W

... rated speed is 1000, 1500 or 1800 rpm. In the event of motorization or motor brake failure, the EC brake is activated and controls the lowering of the load. Centrifugal brake is mounted ...

Torque: 35, 21, 45, 23 Nm

... maximum safety and at the same time test them without having to uninstall the DBQ centrifugal brake. Both the locking brake and the centrifugal brake cannot prevent the accident if the ...

Torque: 0.0034 Nm - 0.124 Nm

Surface Mount Constant Tension Brakes These brakes create a constant web tension by tensioning the spool at the material surface. Because the torque is acting on the fixed diameter body of the brake, ...

Torque: 0.0226 Nm - 0.0791 Nm

These brakes utilize an electric hysteresis brake paired with an integral gearbox. Ideal for applications that require high torque at a low speed. Available in a variety of gear ratios depending on torque ...

Torque: 1.1298 Nm - 24.8567 Nm

These brakes offer air-cooling using compressed air. Ideal for high-speed applications which are dissipating considerable heat.

Torque: 7 Nm - 3,600 Nm
Rotational speed: 1,800 rpm - 4,200 rpm
Power: 7 W - 150 W

Electromagnetic multidisc type brake Tension: 24 V dc – 0% + 15% Application: in oil bath – for dry application at very low rpm only Mounting: The brake is fastened to a wall or on a ...

Torque: 20 Nm - 3,600 Nm
Power: 13 W - 150 W

Multidisc electromagnetic brake. Tension 24 V dc – 0 + 15%. Used in oil bath. The brake is fastened to a wall with the hub (8) splined to the shaft to be braked.

Torque: 100 Nm - 6,000 Nm
Power: 6 W - 162 W

Electromagnetic brake with front toothing, operation with milled flange EC/Z-F Tension 24 V dc – 0 + 15% Used for dry and oil applications. Used for dry and oil bath applications. It must be engaged ...

Torque: 235 Nm - 19,000 Nm

The NBG-TFDS brakes are intended for safety/emergency i.e. spring actuated and hydraulically released. High environment protection grade (IP56) and robust construction make these safety/emergency brakes ...

Torque: 187 Nm - 8,830 Nm
Rotational speed: 475 rpm - 2,000 rpm

The spring-loaded SL brakes are designed for all applications where a fail-safe brake is required. The brake consists of a hydraulic assembly, a plate assembly and a driven hub supplied ...

... different braking solutions, standard or custom made, with the top of the range, performant and long-lasting materials. - Drilling block in Material SWR - Drilling block in Material RCI - Drilling block in Material ...

LinClamp clamping and braking systems are designed to brake and retain masses moving axially over linear guide rails and elements. Their design, surface quality, and dimensional, shape, and positional ...

Torque: 0 Nm - 160 Nm

... the crucial zones of the brake. The caliper unit is built into the half-housing, ensuring that the entire brake is strong and produces low noise levels. Extreme is lightweight and easy to apply in place ...

Torque: 0.04 Nm - 140 Nm

Braking force of PERMANENT MAGNET BRAKE is generated by a permanent magnet instead of a spring, thus it is different from a general type of spring-applied safety brake. The permanent ...

Torque: 0.06 Nm

... Miniature Slim Brake with overexcitation is an ultra-compact design for saving installation space. Combining a special overexcitation controller, it provides high torque, low power consumption and efficiently reduces ...

Torque: 0.04 Nm - 1,000 Nm

The Spring-Applied Single-Disc Safety Brake, Electromagnetic Release, manufactured by Chain Tail Co., Ltd., features a safety and absolute control. It has a minimal variation in torque for quick response even in abnormal ...

Torque: 300 Nm
Braking force: 2.5 kN - 30 kN

SITEMA Safety Brakespneumatic for compressive load

Safety Locks Secure restraining of lifted loads Compact and safe The design principle allows for the creation of highly compact clamping heads. They are ideal for applications involving purely static securing. Series KRG, KRGP For ...

Torque: 1 Nm - 8 Nm

The BHD series from Kern Motion Technology are brakes equipped with an integrated permanent hystresis. This hystresis is capable of deploying their braking force, without an external voltage supply. These ...

Torque: 50, 100, 25, 10 Nm

... manufacturer of brakes in different technologies. Since more than 25 years Kern is producing magnet-powder-brakes and magnet-powder-clutches. This Know-How was used to design and develop a new family ...

Torque: 0.1 Nm - 0.6 Nm

Permanent magnetic hysteresis brake with plastic housing

The Carlisle Brake & Friction 1100 Series Brake Valve provides excellent pressure control up to 3500 psi (240 bar). With single and tandem styles available and backed by Carlisle’s commitment to quality, ...

BRAKE SHOES Carlisle Brake & Friction's Brake Shoes are an excellent way to replenish your shoe core banks, as well as assure a quality foundation for your fleet’s brake ...

Carlisle Brake & Friction's CF2000 brake block friction offers performance characteristics proven to extend and maintain brake life and performance. Carlisle Cohesive Friction brake ...

Torque: 225 Nm - 620 Nm

The SB Series brake provides superior performance in an extremely compact package. Unlike conventional brakes offered today, the SB brake is performance-matched to fit the full range ...

... engineering excellence and OE pedigree. Crucial to the Commercial Vehicle products offered by Borg & Beck is a range of over 85 Brake Discs. Safety and Performance are at the pinnacle of the brand values, therefore working ...

Torque: 50 ft.lb - 30,000 ft.lb

... Disc Brakes are designed to be easy to service and maintain. Need a customized braking system for your application? Mondel Disc Brakes can be customized to meet your specific needs. Use ...

Torque: 10 ft.lb - 11,000 ft.lb

... construction, makes this range of brakes suitable for applications requiring reliable braking with the minimum of maintenance and downtime. Applications include steel mills, stacker reclaimers, shiploaders, ...

Torque: 0.3 Nm - 114 Nm

... the range of values from 61 to 66 to signify the number of friction pads selected for a given brake. The 60 Series brake is the ideal low-cost pneumatic brake for low torque applications ...

Torque: 1.5 Nm - 339 Nm

... • Min. Shaft Length: 7.1 in. To see if a brake in the 90 Series is the right size for your application please note its torque range listed above and review the 90 Series Brake section of DFE’s full ...

Torque: 2 Nm - 702 Nm

... • Min. Shaft Length: 7.3 in. To see if a brake in the 110 Series is the right size for your application please note its torque range listed above and review the 110 Series Brake section of DFE’s full ...

Brake Drum & disc type Using our standard range of High Power Gear Couplings we can adapt to an infinite number of sizes and types of brake drum and brake discs. This type of gear coupling ...

Torque: 180 Nm - 600 Nm

... pressure in the piston the brake is activated. In this way, it is sure that in rest conditions or with the machine off, braking is always présent. Brake identification To make the ...