Spring activated brakes

Torque: 6 Nm - 400 Nm

The modular safety brake system is for A-bearing-side servo motors. It will hold the axis into a set position and even works with a de-installed servo motor in the maintenance process. This is a braking unit that ...

Torque: 270 Nm - 7,526 Nm

Manufactured with a patented design by Mayr, the ROBA-diskstop is a very economical and excellent answer to high braking torques. The key highlights of the ROBA-disktop include a redundancy function acc. EN 81, a patented alignment mechanism ...

Braking force: 0 kN - 190 kN

Braking force: 0 kN - 300 kN

Braking force: 0 kN - 400 kN

Torque: 0.2 Nm - 1 Nm

Small spring applied brake available with either D hub designs or set screws. Standard voltages are 24 and 45 but other voltage options are available. Units are designed to give 100% rated torque right ...

Torque: 1 Nm - 8 Nm

A small spring applied brake with a very thin profile which is mainly used for robotic and ball screw applications. This brake does not come with a hub so customers have flexibility with ...

Torque: 2 Nm - 16.3 Nm

Spring applied holding brake designed for general industrial applications. Unit is used for holding only and has special zero backlash armature. Very thin brake profile provides a compact ...

Torque: 10 Nm - 50 Nm
Braking force: 290, 375 N

Ringspann's DH 010 FPM Brake Calipers sport machine mounting capabilities at right angles to the brake discs. They showcase spring-activated functions, pneumatic-release ...

Torque: 250 Nm - 1,700 Nm
Braking force: 2,600 N - 9,300 N

Brake Caliper DH 025 FPA Features - Mounting to the machine at right angles to the brake disc - Spring activated - Pneumatically released - Manual or automatic ...

Torque: 4,900 Nm - 38,500 Nm
Braking force: 24,000 N - 65,000 N

The DU 060 FPM series is manufactured by Ringspann, and is a brake caliper that can be mounted and can be equipped in either parallel or at right phase to the brake disc. It is spring ...

Torque: 14, 29, 75, 600 Nm

The ATEX approved brakes within the GLOBE program have a very compact built and are very robust. They are spring activated, air released and are to be used in static applications. All ...

The Nexen Ball Screw Brake is a high-torque, spring-engaged brake acting on the machined end of a ball screw. It serves as a primary or redundant safety brake to prevent ...

Torque: 0.2 Nm

Spring-applied brake, operates when no current is applied. The special design of this brake makes it suitable for static breaking. Axial play in the motor has no influence on brake ...

Torque: 0.4 Nm

This power-on brake is available on request for batches above 500 pieces.

Torque: 1 Nm

Spring-applied brake, operates when no current is applied. The special design of this brake makes it suitable for static breaking. Axial play in the motor has no influence on brake ...

Torque: 0.15 ft.lb - 0.74 ft.lb

... series by Ogura is a range of electromegnetic spring-applied brakes. The series features its wear-proof friction material and corrosion-proof surfaces. These offer extended operational life. The MCNB ...

Torque: 0.3 Nm - 130 Nm

... renewable energy. The spring-applied single-disc brakes in the Servo Line series are designed to operate dry. They can be mounted to the A-face or B-face end shield inside the servo motor. The braking ...

Torque: 0.25 Nm - 3 Nm

... Line includes spring-pressure single-disc brakes for brake discs mounted non-positive on the shafts to be retarded. The brake disc, which is permanently connected to ...

Torque: 1 Nm - 600 Nm

... ensure that the torque generated by the spring-applied single-disc brake (brake torque) is reliably transmitted to the machine (motor). Brake design The solenoid housing ...

Torque: 0 Nm - 400 Nm

... safety brakes engage when the electrical power supply is off. Power-off electric brakes can be used as a holding or parking brake to safely stop and hold rotating shafts even if power ...

Torque: 4 Nm - 480 Nm

Magnetic power-off safety brakes engage when the electrical power supply is off. Power-off electric brakes can be used as a holding or parking brake to safely stop and hold rotating shafts ...

Torque: 60 Nm - 480 Nm

... power-off safety brakes engage when the electrical power supply is off. Power-off electric brakes can be used as a holding or parking brake to safely stop and hold rotating shafts even ...

Braking force: 15 kN - 30 kN

... applications for this spring-applied, hydraulically released brake calliper include cranes, lifting gear and heavy industry. These systems have a wide range of use as holding brakes ...

Braking force: 32 kN - 50 kN

... gap between the brake disc and both of the brake pads. A wide range of applications for these systems are passive holding and emergency stop brakes, which are closed by the spring ...

Braking force: 53 kN - 104 kN

... gap between the brake disc and both of the brake pads. A wide range of applications for these systems are passive holding and emergency stop brakes, which are closed by the spring ...

Torque: 4 Nm - 240 Nm

The EIDE pneumatic brake type FZNM is a unit for working on horizontal axes, with a high degree of braking, fast response speed and minimum residual torque. Without air pressure it remains braked (by springs), ...

Torque: 0.06 Nm

... Miniature Slim Brake with overexcitation is an ultra-compact design for saving installation space. Combining a special overexcitation controller, it provides high torque, low power consumption and efficiently reduces ...

Torque: 0.04 Nm - 1,000 Nm

The Spring-Applied Single-Disc Safety Brake, Electromagnetic Release, manufactured by Chain Tail Co., Ltd., features a safety and absolute control. It has a minimal variation in torque ...

Torque: 8 Nm - 480 Nm

the Chain Tail Co ABD series of Electromagnetic safety brakes features a double fail safe, using double coils, safe and reliable control, due to steady torque levels for fast control of loads even in ...

Torque: 7.583 ft.lb - 731.25 ft.lb

... mid-shaft with the flange connected to a bracket. - Spring engaged brakes are designed for horizontal mounting. If vertical mounting is required, consult engineering. Applications - Spring ...

Torque: 4.916 ft.lb - 197.25 ft.lb

... output) configurations. - Brake is designed for horizontal mounting. If vertical mounting is required, consult engineering. Applications - Spring engaged brakes are designed for ...

Torque: 0.06 Nm - 3.2 Nm

The BXR-LE series impresses with its extremely compact design in combination with a constant torque to the sister model BXW. This performance was achieved by new friction lining and excitation technology. Torque from 0.06 to 3.2 Nm ...

Torque: 0.12 Nm - 5.2 Nm

The BXW is the top seller and all-rounder of miniature brakes. It is available with optional holding and / or braking function. The holding variant has twice the torque for the same size. Optionally available with a hand ...