- Detection - Measurement >
- Flow, Pressure and Level Measurements >
- Liquid level switch >
- ENDRESS HAUSER
ENDRESS HAUSER liquid level switches
Just by mounting the switch on a pipe, the surface of the liquid can be easily detected. Description The HPQ-T is designed specifically for liquid level detection ...
Process temperature: -25 °C - 70 °C
Process pressure: -49,000 Pa - 490,000 Pa
... beam. This Fail-safe detection is available by using two different sensing methods for the upper and lower limits on the level of liquid in a tank. Description Unlike all known competitive models, ...
... provided at the tip of the fiber reduces malfunction due to liquid clinging. The lens built into the tip of the fiber ensures a large difference in light quantity between the conditions when liquid is ...
Process temperature: -40 °C - 85 °C
... 303 is manufactured by Simex. It is a liquid sensor type, that is especially designed for conducted liquid presence detection. T parameters of the detector are constant to allow detection of actual presence ...
Process temperature: 0 °C - 260 °C
Process pressure: 500 psi
... a point level indicator, commonly used for high or low level detection in a bin, tank or silo. BinMaster capacitance probes offer fail-safe operation, “Quick-Set” calibration, plus interference-free ...
BinMaster
Process temperature: 0 °C - 260 °C
Process pressure: 500 psi
These intrinsically safe capacitance probes provide interference-free operation, working far below the RF level of 9 KHz at just 6 KHz, and will not interfere with two-way radios or other equipment operating in the radio ...
BinMaster
Process temperature: 0 °C - 260 °C
Process pressure: 500 psi
The BinMaster capacitance probes provide interference-free operation – working far below the RF level of 9 KHz at just 6 KHz. – and will not interfere with two-way radios or other equipment operating in the radio spectrum. ...
BinMaster
Process temperature: -10 °C - 90 °C
0.5~1.0KG-cm torque 1 RPM speed SPDT switch output 220VAC or 24VDC supply IP65 protection class Pedal type options MSS series rotary paddle switches are used for level ...
ATEK SENSOR TECHNOLOGIE
Process temperature: -45 °C - 204 °C
Process pressure: 19 bar - 70 bar
... Total level (e.g., hydrocarbon liquid) Top of emulsion layer Bottom of emulsion layer (e.g., water level) Sediment Features 24 VDC interface detector with four ...
Magnetrol - AMETEK
Process temperature: -40 °C - 121 °C
Process pressure: 55, 103 bar
... ultrasonic level switches utilize ultrasonic contact technology for measuring level in clean liquid applications. These integrally mounted level switches offer either ...
Magnetrol - AMETEK
Process temperature: -40 °C - 85 °C
Process pressure: 138 bar
Echotel® Model 940 and 941 Ultrasonic Level Switches are compact integral units that utilize pulsed signal technology to perform high or low level measurement in a wide variety of liquid ...
Magnetrol - AMETEK
Process temperature: -40 °C - 150 °C
Process pressure: 40, 25 bar
... again is produced and the output state reverts to indicate material absence. The tuning fork level switch can be widely applied to detect the min. and max. level in tanks, silos and ...
FineTek Co., Ltd.
Process temperature: -40 °C - 85 °C
Process pressure: 1 bar - 40 bar
... in the CIP and SIP cleaning applications, the surface roughness (Ra) level can be adjusted according to customer's needs, suitable for use in pharmaceutical and food processing industry applications. Working ...
FineTek Co., Ltd.
Process temperature: -10 °C - 100 °C
Process pressure: 60, 65 bar
... for a variety of liquid level detection 。Unique SD22 design, switch body and tip disconnects USE 。Machine protection of fluid levels 。High and ...
FineTek Co., Ltd.
Process temperature: -20 °C - 350 °C
Process pressure: 3, 4.5 MPa
LXT207 float-operated with test device level switches are suitable for controlling liquid level at horizontal mounting. The float equipped with an extended arm moves a couple magnetic ...
Golden Mountain Enterprise
Process temperature: -20 °C - 130 °C
The vertical float level switch consist of a float with a built in permanent magnet, and guide tube built in reed switch (one or more), when the float rise up or fall down in liquid ...
Golden Mountain Enterprise
Process temperature: -20 °C - 130 °C
Process pressure: 10 bar
... Pressure: please refer to the float spécification Limited Working Température: please refer to the float spécification - Switch Mode: SPDT - __ Setting Point: One float point or Two float points - ; ]
Golden Mountain Enterprise
Aalborg® instruments’ Enhanced Optical Sensor Switch Hi-Low • Eliminates high or low flow rates from damaging your equipment and processes • Enhanced Sensor Switches are available with one or two ...
Liquid Level Photoelectric Sensors The BL series photoelectric liquid level sensors can detect the presence or absence of liquid in transparent pipes ...
Process temperature: 0 °C - 50 °C
The MF is a float switch that turns up and down using the weight as the fulcrum. It is designed to be the smallest possible size. It is available in two types; contact "a" (normally-open contact) and contact "b" (normally-close ...
Process temperature: 0 °C - 50 °C
The RF is a float switch that turns up and down using the weight as the fulcrum. It can detect cut-in and cutout water levels with single float. The "Snap on-off" action ensures stable ...
Process temperature: 0 °C - 50 °C
The MC is a heavy-duty type float switch with a shock absorber. Having equipped with a high grade micro switch, the MC-2 assures trouble-free operation in the liquid containing much suspended ...
Process temperature: -30 °C - 80 °C
For limit level detection in conductive liquids as well as control jobs in connection with conductive rod and suspension electrodes -Narrow construction – width 22.5 mm -Adjustable sensitivity ...
NIVUS GmbH
Process temperature: -25 °C - 80 °C
For limit level detection of conductive liquids as well as control of conductive liquids in Ex areas, for connection of conductive rod and suspension electrodes -Ex-ia version, ...
NIVUS GmbH
Process temperature: -20 °C - 90 °C
... displayed by the ER-107 and the source contact switches to alarm status. When the filling level of the container reaches the conductive pickup's rods a measurement current is able to flow through the ...
NIVUS GmbH
Process temperature: 0 °C - 150 °C
Process pressure: 0 bar - 10 bar
... also possible to detect non-conductive media. The level switch is particularly suitable for use with foaming media because the foam itself is not detected. The output of the level switch ...
KOBOLD Messring GmbH
Process temperature: 100, 70, 90 °C
... detecting 1 to 4 levels. It is available with or without an integrated temperature sensor. It can easily control minimum and maximum levels. The device can be used for safe control and monitoring of the ...
Process temperature: 0 °C - 80 °C
... float level switch which comprises of 1, 2, or 3 contacts. For model having a 1 contact, it has an integrated temperature sensor. This is the suitable equipment which offers a simple and an economical ...
Process temperature: 0 °C - 80 °C
... from Galvatek is a float switch with a simple and easy for use design specifically manufactured for liquid operations without covering. This device offer a smooth and cost-effective solution to control ...
Process temperature: -20 °C - 100 °C
Process pressure: 0 bar - 15 bar
Level Switches made of Brass / NBR for mounting through top or through bottom G1/8" - Mounting thread 1 switch contact Applications General level measurement at tanks and ...
Barksdale
Process temperature: -30 °C - 160 °C
... damping of the vibration is detected by the electronics which switch the output relay after a configurable time delay. The vibrating rod level switch is the perfect solution for single ...
Delta Mobrey Limited
Process temperature: 0 °C - 60 °C
Process pressure: 0 bar - 3.45 bar
The M8000-C miniature liquid level switch has a polypropylene stem and a polypropylene float. Polypropylene is typically suitable for use with acidic liquids such as ...
Madison Company
Process temperature: -25 °C - 80 °C
Process pressure: 10 bar
... glass fibre reinforced plastic, threaded adapter made of stainless steel various connection plugs or 1.5 m sheathed cable The SIKA level switches are used for reliable monitoring of liquid ...
SIKA
Process temperature: -30 °C - 80 °C
Compact single level vertical mount LS01 Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other ...
StandexMeder Electronics GmbH
Process temperature: -40 °C - 160 °C
Compact stainless steel single level vertical mount LS02 (S) Series Liquid Level Sensor used in level control, detection and monitoring. High power switch ...
StandexMeder Electronics GmbH
Process temperature: 200 °C
Process pressure: 0 bar - 12 bar
Versatile stainless steel LS05 Series Liquid Level Sensor for single, multi and continuous level control, detection and monitoring capable of high temperature resistance up to 200°C (SS) ...
StandexMeder Electronics GmbH
Process temperature: -20 °C - 150 °C
Process pressure: 10 bar
... reed switch contacts or a reed switch chain transmitter. One or more floats, free to slide along the guide tube, magnetically act on the contacts positioned at the intervention points, switching their ...
Riels Instruments
Process temperature: -40 °C - 135 °C
Process pressure: -1 bar - 100 bar
... fluctuating level, for example when filling the tank. Compensation for foam, bubbles and condensation as well as for sticky fluids can be set in the Flex Programmer software. The CONTACT-RLBFI level ...
Riels Instruments
Process temperature: -20 °C - 200 °C
Process pressure: 10 bar
The RIL250 float level switch can be used for food liquids, dirty liquids, water, petrol, refrigerant oils. It tolerates the presence of metallic particles, including ...
Riels Instruments
Process temperature: -40 °C - 130 °C
Process pressure: 0 bar - 40 bar
... turbulent, flowing liquids Applications - Most liquids with minimum 0.7 kg/dm³ density and maximum 10⁴ mm²/s viscosity - Chemical industry - Food and beverage - Power ...
NIVELCO Process Control Co.
Process temperature: -20 °C - 50 °C
... technologies. This capacitive overflow detector allowing unrivalled detection of water levels (thresholds) and overflows in the most difficult conditions. - Settings configuration ...
Process temperature: -10 °C - 120 °C
Process pressure: 0 bar - 20 bar
Bilge Level Switch Body entirely AISI 316 L stainless steel Maximum operating pressure 20 BAR Maximum operating temperature -10 / + 120 ° C Average specific weight> = 600Kg / m3 SPDT exchange contact ...
ASIT ITALIA
Process temperature: -20 °C - 80 °C
Process pressure: 10 bar
The level switch is suitable for fluids in general, particularly used in the naval, chemical and aqueduct sectors. Our model AI.LSoem, is composed of a float totally in AISI 316 of di- dimensions 30x36mm, ...
ASIT ITALIA
Process temperature: -20 °C - 80 °C
Process pressure: 10 bar
The level switch is suitable for fluids in general, particularly used in the naval, chemical and aqueduct sectors. Our model AI.LSOEM.W, is composed of a float totally in AISI 316 of dimensions 30x36mm, ...
ASIT ITALIA
Process temperature: -40 °C - 70 °C
... high-performance data logger for storage of measurement values. Water level measurement in water level stations with float shaft and in pipes from Ø 4 " Parameters: Water ...
Process temperature: -40 °C - 100 °C
Process pressure: 7 bar - 25 bar
The electro-optical level sensor is used to monitor the level of liquids. The model LLS.ELS1150 is an enhanced electro-optical level switch from IMS ...
Process temperature: -40 °C - 100 °C
... Technology: optical sensor • 1mm liquid level detecting precision • Low Power: 10mA with output low • Temperature range: -20~55℃ or - 40°C~100°C • Highly chemical resistance material: Polysulfone ...
Process temperature: -20 °C - 200 °C
Process pressure: 0 Pa - 2,500,000 Pa
... installed. FDM Mini Float Level Switch, Lquid Level Switch (Food Grade) FC/FD series is a magnetic float level switch type of product ...
Mütec Instruments GmbH
Process temperature: -20 °C - 200 °C
Process pressure: 0 bar - 35 bar
The FC/FD series is a magnetic float level switch product line based upon two principles, buoyancy and magnetism. The floats of the FC/FD magnetic float level switch ...
Mütec Instruments GmbH
Process temperature: -40 °C - 800 °C
Process pressure: 0 bar - 20 bar
... Capacitance Switch for liquids and solids can be used in mediums such as liquids, pastes, syrups, powders, granules, flakes and chips. It’s broad application and rugged ...
Mütec Instruments GmbH
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining