Eriez piping

Temperature: -29 °C - 38 °C

Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment DESCRIPCIÓN: STAINLESS STEEL, COPPER AND PLASTIC PIPES AND MULTITUBES – Stainless Steel and Carbon Steel Pipes – Copper Pipes – Copper ...

Borg & Beck is an established world-wide supplier of premium quality automotive components to the vehicle aftermarket, with over 100 years history of engineering excellence and OE pedigree. Some of the most important products on a commercial ...

Inner diameter: 40 mm - 600 mm
Pressure: 10, 16 bar

Intermediate lengths are deliverable Diameter bigger then DN 600 on demand Features Special coatings: Coating inside and outside Epoxy redbrown for sewage water Coating inside and outside Epoxy yellow for gas ...

Inner diameter: 19, 6.3, 12.5, 25, 10 mm
Pressure: 0 bar - 15 bar
Temperature: -20 °C - 60 °C

Reinforced rubber hose. Benefits Made of oil resistant rubber Temperature range -20⁰C - +60⁰C Made of oil resistant SBR&NBR rubber with a synthetic reinforcement, comes in coil of 50 m. working pressure 1.5 Mpa or up to 15 ...

Inner diameter: 15 mm - 600 mm
Pressure: 12.5, 10, 8, 6, 16 bar

SIZE: DN15~DN600 CONFORM TO: GB/T 13663.2-2018 GB/T 13663.2-2018 STANDARD: DIN

Inner diameter: 15 mm - 300 mm
Outer diameter: 20 mm - 315 mm
Pressure: 20, 16, 12.5, 10 bar

SIZE: DN15~~DN300 CONFORM TO: GB/T 18742.2-2017 STANDARD: DIN

Inner diameter: 0.5 in - 16 in
Outer diameter: 20 mm - 400 mm
Pressure: 20, 16, 12.5, 10 bar

SIZE: 1/2"~16" CONFORM TO: GB/T 4219.1-2008 GB/T18998.2-2003 STANDARD: DIN

Inner diameter: 21.3 mm - 508 mm
Delivered length: 6 m

Welded tube - EN10217-1 Steel P235TR1 - black Body material - Carbon-Steel

Inner diameter: 4 mm - 22 mm
Delivered length: 1 m

Model: - pipe bendable - Material: - CopperR220 Model series: - Tube from rol - Delivery: - Not completely straight from the role Quality: - Industry EN 12449 - Maximum length: - 4mm, 6mm, 8mm, 10mm ...

Fiber architecture, resin formulas and finishes can be customized to your needs Composite tubing is designed to handle a wide array of strengths, so your tubing will last longer Designed to withstand the most caustic of environments, ...

... cylinder material in a variety of tie-rod applications. The PolySlide® and PolySight® products are supplied as a cylinder tube ready for assembly, or as a complete cylinder designed for your application. The cylinder ...

... approval to grade AFW-G-10. Quality control. Every finished tube is tested at 5000 volts minimum to guarantee its dielectric integrity. MANUFACTURED FOR OPTIMAL PERFORMANCE Polygon Tube provides ...

Inner diameter: 1, 16, 1.5 in
Outer diameter: 60.32 mm - 114.3 mm
Delivered length: 8,530 mm - 9,750 mm

Tubing is a special-purpose pipe used in the oil, main used to gas and water well, to extract the oil, gas and water to the surface. The tubing conform to API Spec 5CT " specification for Casing and tubing ", API Spec ...

Temperature: -40 °C - 300 °C

Bimetal anti-corrosion tubing is the special-purpose pipe used in oil, gas and water well to extract the oil, gas and water to the surface. The bimetal anticorrosion tubing is manufactured by taking ordinary new and ...

Outer diameter: 127 mm - 339.72 mm
Delivered length: 7,620 mm - 14,630 mm

Casing is a special-purpose pipe developed for oil (gas, water) wells in oil field. The products conform to API Spec 5CT "Casing and Tubing Specification", API Spec 5B "Casing, Tubing and Line Pipe ...

Outer diameter: 6 mm - 114 mm
Delivered length: 15,000 mm

... Bearing to cryogenic property. High-purity titanium seamless pipe GR1 is a type of titanium pipe that is made from commercially pure titanium grade 1 (GR1) material. This type of pipe ...

Pressure: 200 bar
Temperature: 90 °C

Admitted diameters: 1/4" - 3/8" - 1/2" Inlet thread size: 1/2"M BSP 60° Outlet thread size: 1/2"F BSP (+nipple 1/2 for 1/2"M BSP connection) Suitable for transfer: Air, water, premixed chemicals with water.

Pressure: 20 bar
Temperature: 90 °C

Admitted diameters: 1/4" - 3/8" - 1/2" Inlet/Outlet thread size: 1/2"MF Suitable for transfer: Air, water, premixed chemicals with water.

Pressure: 600 bar
Temperature: 90 °C

Admitted diameters: 1/4" - 3/8" - 1/2 Inlet/Outlet thread size: 1/2"MF Suitable for transfer: Air, water, premixed chemicals with water.

Inner diameter: 6 mm - 76 mm
Pressure: 0 bar - 1,450 bar

... million load changes, far beyond the standards of ISO 6803 (400.000 cycles) Many hoses even tested according to ISO 6802, with one million cycles. Our production of hose lines In-house ...

Inner diameter: 110 mm

For vertically falling down materials to be handled with care: e.g. rice, wheat, feed, beans, medicines, macaroni and various small sized plastic materials.

SPIRAL TUBE SPIR « EQUIPPED » ARE AT EACH ENDS WITH A DIRECTIONAL FITTING AND A PROTECTION SPRING (301) SPIRAL TUBES “NU” ARE AVAILABLE AS FOLLOW 2,7 x 4 4 x 6 6 x 8 8 x 10 10 x 12

PVC HOSE NON-RIGID ; REINFORCED WITH POLYESTER WORKING PRESSURE: 9 TO 15 BARS IN ACCORDANCE WITH DIAMETERS PRESENTATION: TRANSLUCID IN 25 METERS COILS APPLICATIONS: COMPRESSED AIR, WATER (60°C MAXI.), ALIMENTARY PRODUCTS

The smooth surfaces are characteristic of seamless precision steel tubes. With their symmetry – and consequently, the resulting stability – they are equally suitable as structural tubes and line pipes. Seamless precision steel tubes ...

Inner diameter: 36 mm - 103 mm
Delivered length: 1, 1.5, 2 m

Inner diameter: 20, 25, 32 mm
Outer diameter: 22, 35 mm
Pressure: 500 mbar

Inner diameter: 2 mm - 18 mm
Outer diameter: 4 mm - 20 mm

The product range of plastic pipes and tubes includes many standard sizes with different temperature ranges and operating pressures, depending on the material. Versions are available in polyamide (PA 12-PHL), polyethylene (LD-PE), polyurethane ...

Inner diameter: 12.7 mm - 31.5 mm
Outer diameter: 20.6 mm - 45.7 mm
Pressure: 250, 275 bar

Specially designed to meet minimum bend radius Optimum cut and wear resistance Resistant to microbiological degradation Bonded tube and cover Lightweight compared to conventional rubber alternatives Increased lifetime Available ...

Inner diameter: 19.5 mm - 51.1 mm
Outer diameter: 32.3 mm - 71.1 mm
Pressure: 345 bar

... MISSION • INCREASED SAFETY • ENVIRONMENTAL PROTECTION • PRODUCT RESPONSABILITY • ENERGY CONSUMPTION REDUCTION • LEAKAGE-FREE HOSE ASSEMBLIES • OIL-LESS ASSEMBLIES • FULL SYSTEM CONTROL IN CASE OF HIGH PRESSURES, VIBRATIONS ...

Neodymium doped Yttrium Aluminum Garnet (Nd:YAG) laser rods are solid-state laser crystals with high gain, narrow linewidth and low lasing threshold. It is used for pulsed high energy and high power applications. EKSMA Optics offers ...

... fire fighting hoses with high quality for most demanding situations. All hoses are manufactured according to BS 6391-1983 TYPE 1 & TYPE 2. The Fireguard Model 107 & 108 synthetic fire hose ...