FLEXCO shears

Working length: 0 mm - 55 mm

Possibility of opening the knives in all positions Also available in insulated version. Cutting capacity: - Al 500 mm² - Cu 450 mm² Maximum diameter: 55 mm Length: 43cm Weight: 1.8kg Code CCHC55

Working length: 500 mm
Pressing force: 0 tf - 66 tf

ALLIGATOR SHEAR B500 GREEN LINE Shear for metals with blade driven by hydraulic cylinder, particularly suitable for recyclabe materials. Electric Motor from 7.5 kW, blade lenght: 500 mm, weight shear: ...

Working length: 340 mm
Pressing force: 0 tf - 49 tf

ALLIGATOR SHEAR B340 Shear for metals with blade driven by hydraulic cylinder, particularly suitable for recyclabe materials. Electric Motor from 4 kW, blade lenght: 500 mm, weight shear: ...

Working length: 500 mm
Pressing force: 0 kN - 922 kN

Shear Alligator B500R Shear for metals with blade driven by hydraulic cylinder, particularly suitable for recyclabe materials. Electric Motor from 7.5 kW, blade lenght: 500 mm, weight shear: ...

Plate thickness: 0.6, 1, 1.2 mm

NF E 74400 USE : Designed nose for precision cuts. "Blue" antistatic tool used in explosive atmosphere group II sub. A and B of the standard NF C 23-514. SPECIFICATIONS : Cutting capacity: • inox sheet : 0,6 mm, • steel sheet ...

Shears for cutting: • Al and Cu single- and multistrand cables, outer diameter up to 5 mm • steel cable, diameter up to 5 mm Features: • shaped blades for easy cutting • lever optimizes the force required to cut NOTE: ...

• Al and Cu single- and multistrand cables • outer diameter up to 13 mm • cross section up to 60 mm2 Features: • blades made of special hardened steel that ensures long tool life • easy cutting with minimal force NOTE: ability to ...

• Al and Cu single- and multistrand cables • outer diameter up to 15 mm • cross section up to 50 mm2 Special features: • blades made of quality forged tool steel • cutting without cable crushing or deformation NOTE: do not use for ...

Working length: 410 mm - 610 mm
Pressing force: 45 tf - 60 tf

... metal pieces in pieces. Practical with it's simple and ergonomic structure. Easy to use Hydraulic Srap Shears. Can be manufactured in 45 and 60 tons. Shear length is 410 mm or 610 mm. Contact us for ...

Working length: min 720.0 mm
Pressing force: min 50.0 tf

... chopping the tyres in pieces. Practical with it's simple and ergonomic structure. Easy to use Hydraulic Tyre Shears. Can be manufactured in 50 ton. Shear length is 720 mm. Contact us for more detail; +90 ...

Plate thickness: 3 mm - 13 mm
Working length: 2,050 mm - 6,120 mm

The ADIRA GH range of hydraulic shears are robust and reliable, characterised by their swing cut and low angle of fixed cut. They can handle sheet metal measuring 2 to 6 metres, with thicknesses of between 4 and 13 mm. ...

Plate thickness: 10 mm - 26 mm
Working length: 3,050, 6,100 mm

The ADIRA GV range of hydraulic shears are robust and reliable, characterised by their vertical cutting blade and variable angle. They can handle sheet metal measuring 3 to 6 metres (or longer), with thicknesses of between ...

Pressing force: 70 tf - 140 tf

... strengthen the side opening head and put the shearing material Quick joint Adopt thread joint,thread lock, compact structure High strength knife head Special steel heavy shear head, knife head strong, ...

Pressing force: 70 tf - 140 tf

Lever Shear HS3 The HS3 is the best choose of lever shear of school, laboratory and hobby. It´s suitable for cutting aluminum, plastic and base material. Solid construction made of steel, powder ...

The MG-R and MG line mechanical shears with steel construction frame and reduction gear is designed for perfect cutting quality of sheet metal. These machines are suitable for light gauge metal shearing ...

... Mechanical Shears are equipped as standard with ball transfer tables for easier sheet feeding and reducing marking on the materials. The MG line Mechanical Shears are Standard with 750mm motorized ball ...

... on HVS variable rake shears has hardened slide ways working between roller bearings, so lubrication is eliminated and blade clearance adjustment can be done easily in mechanical or hydraulic system. The UZMA HVS variable ...

Plate thickness: 50 mm
Working length: 230 mm

• Cuts all kinds of textiles and plastic materials • Clean and smooth cut, even in steep curves • Built-in start up switch • Quiet, vibration-free operation • Motor fully insulated and provided with interference suppression • Equipped ...

Working length: 1,334, 2,464, 3,073, 3,683 mm

... seconds with only two rotations of the handle. An optional digital readout is available for this system. The LM Series shears are standard with four edge, high carbon/high chromium (HCHC) top and bottom blades, solid-bar ...

Working length: 3,073, 3,683 mm

... seconds with only two rotations of the handle. An optional digital readout is available for this system. The LM Series shears are standard with four edge, high carbon/high chromium (HCHC) top and bottom blades, solid-bar ...

Working length: 3,073, 3,683 mm

... seconds with only two rotations of the handle. An optional digital readout is available for this system. The LM Series shears are standard with four edge, high carbon/high chromium (HCHC) top and bottom blades, solid-bar ...

... to cut rubber and plastic hoses without metallic wire or spirals • Capacity: Ø 35mm • Cutting operation with guillotine blade • Speed: 40 rpm maxi • Quick change of hose diameters by indexing • Designed for diameters: ...

The SODIFA ESCA pneumatic round knife cutting machine features a blade width of 50, 70 or 86 mm with carbide tip counter blade. It was designed for cutting various materials with up to 20 mm thickness, such as composites, mat, fiberglass, ...

Plate thickness: 4 mm
Working length: 2,000 mm

QC11Y 4X200 HYDRAULIC SHEAR - Steel structure to give rigidity and stability, consolidated with special treatment against vibrations and temperature changes. - Hydraulic transmission system. - Motorized rear ...

Working length: 32 mm - 50 mm

Safety shears for metal strapping 32 mm SHEAR. Safety snips for metal/plastic strapping up to 32mm wide. The pointed shape allows the shears to be inserted under the tensioned strap ...

The C34 Cutter EVOlution is designed for cutting iron bars of maximum Ø 28 mm (1,10 inch). This machine is available with single-phase or three-phase motor. Features: • High functionality and efficient performance; • Design according ...

The C38 Cutter EVOlution is designed for cutting iron bars up to a maximum of Ø 30 mm (1,18 inch). Features: • High functionality and efficient performance; • Design according to the international standard; • The main body is ...

The C44 Cutter EVOlution is designed for cutting iron bars up to a maximum of Ø 34 mm (1,34 inch). Features: • High functionality and efficient performance; • Design according to the international standard; • The main body is ...

... Forfex-400 alligator shear is equipped with 400 mm blades. This hydraulic alligator shear is the ideal machine when it comes to the cleaning of light and medium sized non-ferrous materials. Furthermore ...

Plate thickness: 40 mm
Working length: 500 mm

... Forfex-500 alligator shear is equipped with 500 mm blades. This hydraulic alligator shear is the ideal machine when it comes to the cleaning of light and medium sized non-ferrous materials. Furthermore ...

The Bronneberg Forfex-600 alligator shear is equipped with 600 mm blades. This shear is designed to easily clean car radiators and other aluminium and copper coolers. Furthermore this Bronneberg alligator ...

E-SHEAR: MOTOR + A40 Item No. 2921240000 A40 with narrow-edge ground UPPER blade

E-SHEAR: MOTOR + B70 Item No. 2921270000 B70 with uncoated UPPER blade

PNEUMATIC SHEAR A40

Working length: 2,100, 2,600, 3,100, 4,100 mm

• CE Norms • Pendant control panel • CNC control - Cybelec CybTouch 8 (color-touch screen) • Automatic cutting length (stroke) adjustment controlled by CNC • Ball screw backgauge with 1000 mm stroke controlled by CNC • Automatic ...

Working length: 3,100, 4,100, 6,100 mm

• CE Norm • CNC Control - Cybelec CybTouch 8 (color-touch screen) • Automatic cutting length (stroke) adjustment controlled by CNC • Automatic ball screw backgauge with 1000 mm stroke controlled by CNC • Automatic rake angle adjustment ...

Working length: 1,100 mm - 3,060 mm

• Touch screen NC control • Programmable motorized backgauge with 750 mm travel • Pneumatic sheet support with Return to Sender and Send to Rear • 1 pc. squaring arm with scale • 2 pes. sheet support arm • Finger protection • Ball ...

Pressing force: 1,828.9 kgf - 5,080.2 kgf

JAK-200 TREE SHEAR For 1.8 to 5 ton excavators (4000-11000 lbs) JAK-200 is a tree shear designed for versatile professional use, suitable for use in smaller scale excavators. JAK-200 is the powerhouse ...

Pressing force: 5,080.2 N - 12,192.6 N

JAK-250 TREE SHEAR For 5 to 12 ton kg excavators (11000-26455 lbs) JAK-250 is our efficient and multi-purpose tree shear that is best suited for use with medium size excavators Multi-purpose JAK-250 ...

Pressing force: 12,192.6 N

JAK-300 TREE SHEAR For over 12 ton kg excavators (26455 lbs) JAK-300 is the largest model of our tree shears for excavators and is suitable for efficient professional use in large excavators. JAK-300 ...

Working length: 2,050, 3,050, 3,650, 4,050, 4,350 mm

Our fully automated shears The HSLX shears are just like our TS shears guillotine type shears. This means that the cutting action is a scissors cutting action. The ...

Plate thickness: 6, 12 mm
Working length: 2,050, 3,050 mm

... our shearing line Our TS guillotines are the most budget friendly machines in our shearing line. The TS machines are guillotine type shears. This means that the cutting action is a scissors ...

Plate thickness: 2 mm - 20 mm
Working length: 2,600, 3,100, 4,100 mm

Throat depth155 180 210 210 260 260 180 Back guage stroke - 1000 - 1000 - 1000 - 1000 - 1000 - 1000 - 1000 Shearing angle - 1.26 - 1.42 - 1.79 - 1.97 - 2.33 - 2.85 - 1.49 Hydraulic pressure - 255 - 255 - 255 - 255 ...

Plate thickness: 4, 2, 6 mm
Working length: 2,000, 2,500, 3,000, 4,000 mm

Back guage stroke 1000 1000 1000 1000 Shearing angle 05-2.0 - 05-2.0 - 05-2.0 - 05-2.0 Main motor power 6 6 8.5 8.5 Length 2950 - 3450 - 3950 - 4950 Width 1400 - 1400 - 1400 - 1400 Height 1950 - 1950 - 1950 ...