FLUX submersible pumps

Fixed and Variable Displacement Displacements ranging from less than one to eight Cubic Centimeters per revolution (0.05 to 0.5 Cubic Inches per revolution) Pressure Ratings up to 4000 continuous Materials compatible with low lubricity ...

Flow: 4.91 l/min
Pressure: 0 psi - 500 psi

... paints and adhesives and most solvents. Pogo Plus pumps have a 4:1 ratio and are available with maximum pressure ratings of 290 psi or 500 psi. Patented Air Motor Design Durable Pump Design Pump ...

ADVANTAGES to the TN Series: Thin to heavy viscosities – liquids containing abrasives and solids Double suction volutes Virtually maintenance-free No bearings or seals in the liquid except 24" and 36" nominal lengths Five Series ...

Flow: 7.2 m³/h

... borehole pumps. Unlike the conventional borehole pump which uses centrifugal force as the energy to move the water, the Subrotor submersible pump ...

Flow: 0 m³/h - 1,600 m³/h
Pressure: 10, 16 bar
Head: 0 m - 95 m

... measure is provided by crushers • The rotor and pump are on a single mile. The rotor is centered on two heavy duty bearings. • Easy easy maintenance is required and long life • Easy to set up • Pump ...

Pressure: 130 bar

Supplied in standard in warm box and cold box execution the VP pumps can be directly mounted on the ASU cold box and remain in cold standby. They integrate all the necessary safety devices for safe operation in continuous ...

Flow: 19.44 m³/h - 1,267 m³/h
Head: 4 m - 33 m
Power: 15 kW - 200 kW

... The type with “L” is series of sump pump with extended shaft , which is suited for the working condition of deeper level. The guide bearing construction is added to the pump on the basis of the standard ...

Flow: 600 m³/h
Pressure: 10 bar
Head: 45 m

Submersible Sewage and Wastewater Pumps It can pump different kinds of wastewater by single vane, double vane or free-vortex impeller type. • High hydraulic efficiency is obtained ...

Flow: 0 us gal/min - 120 us gal/min
Head: 70'00"
Power: 0.75, 0.4, 0.5 kW

MOTOR 2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class ‘F’ (155ºC), rated IP68. BALL BEARINGS The rotor shaft is carried in two single row, deep groove ball bearings. The bearings are ...

Flow: 170, 160 l/min
Head: 12, 10 m
Power: 0.37 kW

Energy saving   Capacity dry running   Available PP- PVDF       Attacks:   Rigid duct   flexible piping   Flanged

Flow: 0 m³/h - 475 m³/h
Pressure: 5 bar
Power: 0.55 kW - 30 kW

LANDIA SUBMERSIBLE PUMP TYPE DG The DG pump is a highly flexible submersible pump which was developed specifically for pumping slurry with a high content ...

RMT 10 submersible pumps are ideal for removing water from trenches, ditches, manhole, industrial sumps and excavations. It has small cross section and can be lowered into areas having ...

Flow: 0 m³/h - 750 m³/h
Head: 0 m - 48 m

Kirloskar NS submersible pump is used for sewage and seepage application. NS submersible pumps are single stage, single suction pumps. NS submersible ...

The RDC021 Series Piston Pump/Pneumatic/Low-Pressure, manufactured by RDC Rodicar, is designed as pneumatic pump. It is mainly used for transferring liquid. This pump is built with a ...

As a result of their high efficiency and reliability they are suitable for use with clean water in domestic, civil and agricultural applications such as the distribution of water in combination with pressure sets, for the irrigation of ...

Flow: 2,000 m³/h

Designed for distribution of water in the municipalities and for pumping water in agriculture, the submersible pump was developed by Gruppo Aturia, and all the parts of this unit are crafted from grey ...

Flow: 13.5 m³/h - 90 m³/h
Head: 323 m - 600 m
Power: 9.2 kW - 45 kW

Radial and mixed-flow multistage electric borehole pumps with incorporated retaining valve and stainless steel external casing for EC, ERC, ECX series.

Flow: 0 l/s - 5.2 l/s
Power: 0.75 kW

The Mini pump excels in applications where reliability and easy handling are essential. It is built to handle contaminated water, pH 5-8, and water containing relatively abrasive solids up to the size of 5 mm. Pump ...

Flow: 276 l/min
Head: 11.3 m
Power: 0.75 kW

This lightweight, compact submersible centrifugal pump is ideal for moving water in multiple confined and open area applications. This is a powerful, versatile, low maintenance pump ...

Flow: 400 m³/h
Pressure: 48 bar

DV vertical pumps are designed to accomplish easy fluid suction from wells, cisterns, barrels and tanks. Their reduced dimensions and partial immersion design reduce the negative head. Different cone plates for fixing ...

Power: 3 kW

... robust macerator pump is ideal where small diameter discharge pipes exist. Since everything passing through the pump is macerated existing pipes as small as 2” can be ...

Flow: 0 m³/h - 1,600 m³/h
Head: 0 m - 95 m
Fluid temperature: 0 °C - 40 °C

... seals are installed in larger pumps from the range. The bearings in this submersible pump are greased for life. Motor cooling jackets are available for higher temperature water ...

Flow: 4 m³/h - 140 m³/h
Pressure: 4 bar - 48 bar

pumping of media with solid contents pumping of media low to high viscosity continuous, gentle and low-pulsation flow précisé dosing flow in proportion to speed ADDITIONAL OPTIONS: • open hopper • feeder • explosion protection • ...

Flow: 54 m³/h - 324 m³/h
Head: 16 m - 35 m
Power: 2.2 kW - 22 kW

Submersible electric pumps suitable for the lifting of clear and dirty water. They are especially used in building yards and for pumping abrasive liquids. Owing to their maneuverability they can be easily moved.

Flow: 0 m³/h - 200 m³/h
Head: 3 m - 671 m
Power: 0.55 kW - 190 kW

MAT 6", 8" and 10" submersible pumps, thanks to their design of the impellers and diffusers , adapt to medium flow rates and high heads. Designed for pumping clean water in civil and industrial applications ...