Length: 28 mm
Height: 36 mm
The CLA SC-002 is bidirectional, resistive type force sensor. The measurement system is composed of a semiconductor strain gage. The measurement shaft is made of a 0.5mm diameter axis with a positioning notch for calibration ...
Rated load: 2 t - 1,000 t
... conditions. • Capacities from 2Te to 1000Te as standard. • Cells designed to exactly suit your application. • Robust, Compact, Stainless Steel design. • Accurate to better than 1% • Proof Load 200% ...
Power Jacks
Rated force: 500 N - 20,000 N
... see data sheet Technical data and functions • Wire strain gauges in four-conductor full-bridge circuit. • Control resistance for final adjustment of the measuring range. • All ...
Rated load: 2.5 t - 49.9 t
... cell ships pre-calibrated, eliminating the need for test weights Each load cell is temperature compensated for increased accuracy For crane applications the load cell ...
Rated load: 0.01 t - 7.5 t
... Bending Cells, widely used in industrial environments, are also monodirectional. Traction devices, on the contrary, are those subject to traction only: dynamometers or load cells ...
Riels Instruments
Rated load: 0.25 t - 100 t
... signal through the use of strain gauges. Wide assortment and numerous fields of application. We can split cells in: cell compression, traction cells, ...
Riels Instruments
Rated load: 0.1 t - 200 t
... signal through the use of strain gauges. Wide assortment and numerous fields of application. We can split cellsin: cell compression, traction cells, ...
Riels Instruments
Rated load: 0.1 t - 5 t
The robust and well-designed load cell from General Measure, with the C3 grade accuracy. GML-DHH3 S type load cell has the material option with alloy steel and stainless ...
General Measure Technology Co., Ltd
Rated load: 0.1 t - 5 t
The robust and well-designed load cell from General Measure, with the C3 grade accuracy. GML-DHH3C S type load cell has the material option with alloy steel and stainless ...
General Measure Technology Co., Ltd
Rated load: 10 kg - 1,000 kg
The robust and well-designed load cell from General Measure, with the C2/C3 grade accuracy. GML-DHH5 bending beam load cell has the material option of alloy steel and ...
General Measure Technology Co., Ltd
Rated force: 15 daN - 3,000 daN
Length: 3 m
... recommended for all high precision measurements, test benches, laboratory tests Usable with load rings or buttons for better performance. “S” load cells provide superior performance ...
Shear beam load cell. Anodized aluminium construction, silicone sealing. 3000 divisions OIML R60 class C. Protection IP65. High accuracy with off-center loads, OIML R76. Applications: - ...
GIROPES
Shear beam load cell. Anodized aluminium construction, silicone sealing. 3000 divisions OIML R60 class C. Protection IP65. High accuracy with off-center loads, OIML R76. Applications: - ...
GIROPES
Shear beam load cell. Anodized aluminium construction, silicone sealing. 3000 divisions OIML R60. Accuracy class C3. Protection IP65. High accuracy with off-center loads, OIML R76. ...
GIROPES
Rated load: 30, 12, 3, 6, 20 kg
The transducers of the BC302 series are miniaturized low-profile load cells, with an alluminium alloy measuring body, for traction / compression loads, with extremely ...
S2Tech srl
Rated load: 50 kg - 10,000 kg
... profile platform scales - Space limitation installations - General industrial weighing FEATURES - Ultra low profile - Wide capacity range 50kg - Electroless nickel plated - Fully encapsulated ~10t - Matched ...
PT Limited
Rated load: 250 kg - 10,000 kg
... accuracy shearbeam load cell, available in capacities from 250kg to 10t in tool steel electroless nickel plated. A very popular Australasian shearbeam where it has become the industry standard and ...
PT Limited
Rated load: 250 kg - 5,000 kg
... resolution class III L:10,000 and classIII:9500 NTEP device, and similar approvals in other areas. It is insensitive to axial loads, yet super accurate. Constructed in alloy tool steel and electroless nickel plated ...
PT Limited
The tension/compression load cell is compatible with every CENTOR Star and/or Dual force and torque gauge. It is built to complete a set of force measurements in a cost-effective way. ...
ANDILOG Technologies
Rated force: 20 N - 50,000 N
... SPIP S9 series of S-Block force load cells. The high capacity cells are of external- and detachable type. They are automatically identified by all the Centor Star and ...
ANDILOG Technologies
SPIP L161 series miniature compression load cell with CENTOR Star, dual force guage and torque gauge provides force or torque calibrations at affordable price. It is developed to calculate ...
ANDILOG Technologies
Rated load: 5 kg - 100 kg
... industrial and process weighing. These single point load cells are easy to install and are interchangeable with most other load cells of their type. All critical components ...
Cardinal Scale
Rated load: 20 kg - 200 kg
... TSSP specialty single point series is a high performance and low cost load cell for use in bench scales, medical scales, and a variety of other applications. These low-profile load cells ...
Cardinal Scale
Rated load: 450, 1,100, 1,800 kg
... while remaining flexible over the life of the cell. This special compound protects the load cell strain gages, and over a broad temperature range has no effect on load ...
Cardinal Scale
Rated load: 100 kg - 20,000 kg
... Hermetically welded seal (IP67) •Low profile •Spherical loading button for optimum alignment of load •Top plate and base plate included •Double strain gauge bridge available (redundant ...
ADOS
Rated load: 30,000 kg - 625,000 kg
•Tanks weighing •Steel manufacture plants •High capacity silos weighing •Stainless steel AISI 630 (17-4-PH) •Hermetically welded seal (IP67) •Wide range of capacities •Individual test report •EX version for hazardous area available ...
ADOS
Rated load: 100 kg - 12,000 kg
... welded seal •Low profile for applications with limited space •Spherical loading button for optimum alignment of load •Double strain gauge bridge available (redundant circuit) •Simple ...
ADOS
Rated load: 3 kg - 50 kg
... position of the load applied to the upper platform. Model 1661 load cells are designed to this “single point” type and are manufactured from high quality aluminum alloy of aviation ...
BCM SENSOR TECHNOLOGIES bv
CF Series Load Cells The CF series is the IBD flanged load cell category. They are fitted at the end of a measuring roller and can precisely detect ...
... bridge strain gauged load cells compatible with the floor standing LRPlus Series materials testing machines. The HLC Series load cells have a 15-pin ...
AMETEK Chatillon
... bridge strain gauged load cells compatible with the LR Plus and EZ Series bench mounted materials testing machines. The XLC Series load cells have ...
AMETEK Chatillon
These load cells are compatible with the LS Series test machines, the TA1 texture analyzer and the FT1 friction tester. These load cells are S-Beam designed with anti-rotation ...
AMETEK Chatillon
Strain gauged load pins can easily replace an existing clevis, pivot pin or solid shafts in machinery or equipment to measure the load at that point. Key features: • Custom manufactured ...
Rated load: 5 kg - 50 kg
The AF Series, manufactured by Laumas Elettronica, is a single point load cell that has been constructed out of a special steel structure. It also has a combined error of less than +/- 0.05 % and a protection ...
LAUMAS Elettronica
Rated load: 3 kg - 50 kg
features Off center load cell type SUP1 can be used in small capacity weighing systems. Some applications are: Small weighing platforms Hopper scales, etc Bench scales Price ...
Celmi
Rated load: 7 kg - 40 kg
... Compensated temperature range -10...+40℃ Operating temperature range -35...+70℃ Storage temperature range -40...+80℃ Safe load limit 150% Emax Insulation resistance >5000M Ω Cable length 1m, 5m Applications ...
SENSOCAR
Rated load: 25 kg - 250 kg
... Compensated temperature range -10...+40℃ Operating temperature range -35...+70℃ Storage temperature range -40...+80℃ Safe load limit 150% Emax Insulation resistance >5000M Ω Cable length 5m
SENSOCAR
Rated load: 50 kg - 500 kg
... Compensated temperature range -10...+40℃ Operating temperature range -35...+70℃ Storage temperature range -40...+80℃ Safe load limit 150% Emax Insulation resistance >5000M Ω Cable length 5m
SENSOCAR
Rated force: 5 N - 100,000 N
Universal load cells combining accuracy, sturdiness and easy installation o Material: - 2710: stainless steel - 2715: alloy steel o Protection class: IP67 o Compact design o Cable length: ...
SENSY S.A.
Rated force: 3 kN - 3,000 kN
LOW-PROFILE (PANCAKE) LOAD CELLS Reference : 2960-2962-2965 Universal tension and compression load cells for industrial force measurement. - Flat design - High stiffness ...
SENSY S.A.
Rated force: 30 kN - 50,000 kN
HEAVY COMPRESSION LOAD CELLS (VERY HIGH CAPACITIES) Reference : 3110-3115 High-capacity compression load cells. - Wide range of capacities: ...
SENSY S.A.
Rated load: 300 kg - 10,000 kg
... compression load cell equipped with a shear beam load cell, nickel-plated steel alloy and stainless steel versions. It has an ATEX version, maximum capacity of 10,000 ...
UTILCELL
Robust Digital load cell - Type SD is an approved beam load cell for powerful, process and common industrial weighing for applications like strap scales, short vessels, ...
Eilersen Electric Digital Systems A/S
compression load cell50 - 25 000 N, ø 105 - 264 mm | ATB-P / ATB-PE series
The ATB-P / ATB-PE is a steel load cell, manufactured by ASA-RT. It is equipped with housing for the ball-bearing. The cell provides mechanical overload integrated protection, and includes ...
ASA-RT s.r.l.
Rated load: 6.5 t - 250 t
... is also known as a shackle pin load cell, a shackle load cell or a load shackle. Designed and manufactured in the EU for high quality assurance. Green ...
Please specify:
Help us improve:
remaining