GEMU compact valves

Pressure: -1 bar - 20 bar
Temperature: -20 °C - 80 °C

Mini ball valves - 5600 series Areas of application : compressed air, oil, water Technical features - chrome-nickel plated brass body - ball sealings : PTFE - nylon 66 handle - oil-proof rubber ...

Pressure: 70 psi - 260 psi

... self-modulating cooling control valves are temperature actuated, self powered, and applicable to cooling processes using water or other fluids. 56-T Series valves are available in eight different sizes. ...

DN: 50 mm - 500 mm
Pressure: 1.5, 3 bar
Temperature: -25 °C - 80 °C

... tight, pressure tight and vacuum tight locking valve for silos, hoppers and pipelines, special design for bulk solids, simple and low-cost design, low height, easy to dismantle and to maintain. The valve ...

DN: 2, 1.5, 1.25, 1 in
Pressure: 300 psi

• Test and drain valves are compact 3-position ball valves with drain orifice having k-factor 5.6 or 4.2 (optional) • 3-positions consist of OFF, TEST and DRAIN • Brass construction ...

DN: 15 mm - 800 mm
Pressure: 1.6 MPa - 25 MPa

... 　　◎Flow resistance coefficient is small 　　◎Structure is compact and manufacturing process is good 　　◎It can be used on ring network pipeline whose medium flows towards two directions 　　◎Structure length ...

... patent-pending technology that includes high-temperature seals and adjustable valve pins, the system provides a flawless injection molding process. Speak to us today about our VeriShotᵀᴹ Single Valve ...

Pressure: 250 bar
Temperature: -30 °C - 120 °C
Flow rate: 42 l/min

... cavity · Compact size · Adjustment may be locked in place. · Positive shut-off Operation The valve varies flow restriction by adjusting needle in or out and will shut off ...

Pressure: 300 psi
Temperature: 149 °C

Overview This valve is installed in the downstream of sampling systems/heat exchanger. The valve responds only to temperature. Under normal operation, the valve is fully open. If the ...

Pressure: 0 bar - 7 bar

... microfluidic valve for injection or selection of up to 10 different fluids or chips. The flow is bidirectional in the valve. The device can be used as a selector or as a distributor for either multiplexing ...

DN: 10 mm - 80 mm
Flow rate: 4 m³/h - 127 m³/h

Integrated pneumatic actuator NAMUR solenoid mounting pad Compact assembly Visual indicator High Cycle-Life Actuator rotates 360°

DN: 700 mm - 1,200 mm
Temperature: -200 °C - 600 °C

... lasting tightness does not rely on differential pressure Unique, industry best disc valve control behavior with patented S-disc feature – possible to mount even on existing valve units Modular design ...

DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: -60 °C - 80 °C

... product range includes: Filter Regulators Filters Volume booster Lock-up valves Unidirectional and bidirectional flow regulators Quick Exhaust valves Shavo's Lockup Valve retains ...

Pressure: 60 psi - 100 psi

... cylinder and unique rigid diaphragm allow this valve to act as a front closing valve making it more desirable for accurate placement of small dots and fine bead patterns. The lightweight ...

DN: 25 mm - 100 mm

... replacement of existing valves. The GULBINAT standard ball valve can be used as a regulating valve, is piggable and avoids pipe blows. The use of the GULBINAT ball valve ...

Pressure: 315 bar
Temperature: -40 °C - 65 °C

... Robust & compact patented design up to 315 bar (4000 cycles tested) - Excellent gasket resistance up to 60 blow downs - New handwheel design with integrated rupture safety - Easy guard replacement during maintenance ...

DN: 100, 150 mm
Pressure: 16 bar

Dry Pipe Valve The DN100 and DN150 TYCO Model DPV-1 Dry Pipe Valves are differential valves used to automatically control the flow of water into dry pipe fire protection sprinkler systems ...

... compared to the conventional Double Block & Bleed Valve assemblies. As a secondary seal, the valve is provided with a lubrication system which allows feeding a special lubricant into the valve ...

DN: 0.75, 1, 1.5, 2 in

... technologies to allow fast, simple, compact, reliable and environmentally friendly depressurizing, venting and safe draining of piping systems. Performance is far superior when compared to conventional three valve ...

DN: 15 mm - 50 mm

Model No.: CTS100-Socket Body Material:CPVC Seat:PTFE(TEFLON) O-Ring:EPDM Size: DN15(1/2")~DN50(2") (Copper Tube Size)

... premium quality range of Brass Gas Valve. REFEX 134A VALVE BRASS GAS COCK HALF VALVE BRASS GAS VALVE BRASS NOZZLE VALVE BRASS PRESSURE GAUGE VALVE BRASS ...

DN: 0.5 in - 2 in
Pressure: 150 psi
Temperature: 70 °F

The QIC2 Series features compact ball valves designed for applications in various industries. These valves are built in a compact and lightweight construction, with PTFE ...

Manifold valves stack multiple hydraulic valves on different levels of a single valve assembly according to the hydraulic principle diagram to achieve a variety of functions through an ...

DN: 15 mm - 150 mm
Pressure: 16, 40 bar
Temperature: -60 °C - 200 °C

... petroleum gas, gaseous media, non aggressive towards valve materials. Valve tightness rate: Class "A" Service life: At least 25 years Warranty period: 3 years or 10 000 cycles Body materials: ...

DN: 0.25 in - 4 in
Pressure: 10,000 psi
Temperature: -54 °C - 538 °C

... of lightweight Monoflange isolation valves that are ideally suited to a wide range of instrumentation applications via standard flanged pressure take-off points. The compact design incorporates the ...

DN: 25 mm
Pressure: 0 psi - 400 psi
Flow rate: 0 us gal/min - 25 us gal/min

COMPACT PUMP PRESSURE VALVE- Reduces rapid pump cycling and maintains a pre-set operating pressure for wells. Threaded female I.D.x male O.D. on inlet and outlet connections. Features a low lead alloy ...