GEMU compact valves

DN: 5 mm - 20 mm
Pressure: 315 bar
Temperature: -40 °C - 80 °C

Pre-load valves, also called sequence valves are a type of pressure control valve. They generate a largely constant pressure drop between the inlet and outlet on the valve. ...

DN: 6.5, 9 mm
Pressure: 400, 300, 30, 100 bar
Temperature: -40 °C - 80 °C

Pressure reducing valves type ADC and AM are suitable for the supply of control circuits with low oil consumption. These valves feature an override compensation, i.e. acting like a pressure-limiting valve ...

Pressure: 30, 40 bar
Flow rate: 2 l/min

... pressure-reducing valve type PM is available as a single valve. The proportional pressure-reducing valve type PMZ is a twin valve. The proportional pressure-reducing ...

Pressure: 0.5 bar - 250 bar
Temperature: -20 °C - 200 °C

WEH® Screw-in Valve TVR400, stainless steel - Series The screw-in valves of the WEH® TVR400 series are mechanical shut-off valves which allow the media to flow in the direction of screw ...

DN: 0 mm - 1.5 mm
Pressure: 0 bar - 34.7 bar

The needle valve is an adjustable orifice, which can be used to control flow rates, mini-cylinders, nozzles, timing circuits, filling heads, bleed vents, and in many other applications. The adjusted flow remains stable ...

DN: 1 mm - 1.1 mm
Pressure: 0 bar - 13.8 bar

The MSV series slide sleeve valve provides an efficient in-line three-way valve. When the sleeve is moved to the “ON” position, fluid is allowed to pass through the valve. When the sleeve ...

DN: 1.78 mm
Pressure: 500 psi

Beswick’s miniature ball valve is an excellent choice for applications requiring a compact on/off valve. This design offers small size, light weight, ...

Temperature: -20 °C - 40 °C

Vacuum Valves, 3 Channels, AG Series . Connection on the vacuum network . Electric control . Voltage: 12 VDC / 24 VDC ou 24 VAC / 110 VAC / 220 VAC . NO or NC for the vacuum or compressed air supplied servo Characteristics . ...

The AGVB / AGVM control valves are basic and the most versatile type of control valves. Description The CV 3000 Alphaplus range of Top-guided Single-Seated Control Valves features a ...

DN: 0.11 in - 0.56 in
Pressure: 1,550 bar
Temperature: -50 °C - 230 °C

... thus a high reliability of the valve. MAXIMATOR valves of the 21V series have a cold-machined stainless steel body. Valve bodies are available in six different designs and can be equipped ...

... needle valves, fittings, tubing, check valves, adapters and couplings as well as accessories for High Pressure Applications up to 217,000 psi(15,000 bar). Product features long lasting durability ...

DN: 90 mm
Pressure: 4 bar - 8 bar
Temperature: -20 °C - 80 °C

... valves (1/4" to 1") as well as check valves for hydrogen refueling systems and generally for use in hydrogen applications. Hydrogen Valves All Valves for Hydrogen refuelling applications ...

DN: 0.25 in - 0.75 in
Pressure: 0 psi - 250 psi
Temperature: -18 °C - 70 °C

ANVER’s two-way ball valves are compact and easy to use. Activated manually for basic on/off pressure control or vacuum applications, these durable ball valves provide a tight connection ...

DN: 0.375 in - 1 in
Pressure: 0 psi - 250 psi
Temperature: -18 °C - 121 °C

... release • Forged body design, extends the life of the ball valve • Optimum flow design. • Blow-out proof stem • Locking handle for added safety • More economical and compact than 3-way valves • ...

DN: 8 mm - 25 mm
Pressure: 0 bar - 7 bar
Temperature: -10 °C - 140 °C

The GEMÜ F40 2/2-way filling valve is designed for filling processes in aseptic and hygienic areas of application. Flow rates up to 6,600 l/h are possible depending on the version. The sealing concept of the valve ...

DN: 6 mm - 80 mm
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C

The GEMÜ 554 2/2-way angle seat globe valve has a plastic piston actuator and is pneumatically operated. The valve spindle is sealed by a self-adjusting gland packing or a compact seal ...

DN: 6 mm - 80 mm
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C

... 550 2/2-way angle seat globe valve has a low maintenance stainless steel piston actuator and is pneumatically operated. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance ...

DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C

PTFE or PE ball seating joint Double sealed shaft Seal materials - EPDM, FPM Ball seating joint - PE, PTFE Connections - PE fusion socket, PE fusion spigot, solvent socket, solvent spigot, threaded socket Approvals ...

DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 0 °C - 80 °C

... adaptor for solenoid valve (with adaptation for K122 and K123) PO-NC (single acting: fail safe close), PO-NO (single acting: fail safe open), PO-DA (double acting) Accessories: Electrical position indication ...

DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 10 °C - 60 °C

... adaptor for solenoid valve (with adaptation for K122 and K123) PO-NC (single acting: fail safe close), PO-NO (single acting: fail safe open), PO-DA (double acting) Accessories: Electrical position indication ...

DN: 50 mm - 150 mm

Whether it is silos, mills or extraction systems, our slide valves enable a safe isolation, and are also available for demanding CIP, dust or gas applications. The REDEX® slide valve is suitable for the ...

DN: 50 mm - 500 mm

Whether it is silos, mills or extraction systems, our slide valves enable a safe isolation, and are also available for demanding CIP, dust or gas applications. The RSV slide valve is suitable for the ...

DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C

The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing the flow rate and ...

DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C

... prevent any risk of corrosion. - New valve body internal design. Substantially higher flow coefficient and lower pressure drops. The degree of efficiency reached has also enabled the size and weight of the valve ...

DN: 12 mm - 15 mm
Pressure: 6 bar
Temperature: -20 °C - 140 °C

... CM is a manually operated diaphragm valve of reduced dimensions and particularly compact structure, ideal for use in confined spaces. • Connection system for solvent weld and threaded joints • Extremely ...

DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C

... pneumatic rotary actuator. Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after other equipment like gas pressure regulators, gas meters etc. These ball valves ...

DN: 80 mm - 300 mm
Pressure: 16 bar
Flow rate: 10 m³/h - 1,600 m³/h

ELECTROHYDRAULIC ON/OFF VALVE The valve opens fully or shuts off in response to electric signals. The valve is controlled by a solenoid that allows control liquid to flow in the upper ...

DN: 80 mm - 300 mm
Pressure: 1 bar - 16 bar
Flow rate: 10 m³/h - 1,600 m³/h

ALTITUDE CONTROL VALVE This valve controls water level in high level reservoirs to avoid overflow, without any external control system like float control etc. The valve remains completely ...

DN: 80 mm - 300 mm
Pressure: 1 bar - 16 bar
Flow rate: 10 m³/h - 1,600 m³/h

PRESSURE REDUCING VALVE The valve reduces high upstream pressure to a pre-set lower and constant downstream pressure level, regardless of fluctuating flow or varying upstream pressure. A hydraulic ...

DN: 0.125 in
Pressure: 0 bar - 12 bar
Temperature: -20 °C - 60 °C

The cartridge Top-valve was especially developed for gas extraction from cartridges / bottles. The cartridge top valve can be combined with the cartridge pressure regulator ED 06 or with the flow meter ...

DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 1 MPa
Temperature: 0 °C - 60 °C

... range, compared to Pisco conventional standard speed controller. The industry's smallest and low profile. It has a very compact and low profile body as a speed controller with an indicator. Push-lock type knob. Easy ...

DN: 4, 6, 8 mm
Pressure: 0.1 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C

Orifice Flow Controller Preset Flow Control Valve (Tamper-Proof) preset flow control valve makes constant-flow in one direction and unrestricted flow in the opposite by an orifice restrictor. It is best ...

DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C

... without an external needle for speed adjustment. Approx. 2/3 height of the conventional Speed Controller.* Suitable for a small space. *Compared to the max. height of the conventional Speed Controller. Selectable ...

DN: 32, 40, 50 mm
Pressure: 40 bar

COMPACT PRO motorised valve – 2 way FF BRASS Description INDUSTRIAL USE ALL-IN-ONE actuator for 3 points without relay or 2 points with relay connection Class protection: IP67 Operating ...

DN: 25, 32, 20 mm
Pressure: 10, 16, 30 bar

COMPACT PRO motorised valve – 3 way FFF BRASS horizontal INDUSTRIAL USE ALL-IN-ONE actuator for 3 points without relay or 2 points with relay connection Class protection: IP67 Operating time: ...

DN: 25 mm - 40 mm

COMPACT PRO motorised valve – 3 way FFF BRASS horizontal INDUSTRIAL USE ALL-IN-ONE actuator for 3 points without relay or 2 points with relay connection Class protection: IP67 Operating time: ...

Pressure: 0 bar - 40 bar
Temperature: 95 °C

Externally controlled valve for the hydrogen sector Valves for hydrogen and oxygen in electrolyser operation Pneumatically operated 2/2-way valve - Direct pressure control Designed ...

DN: 150 mm - 800 mm

Slide gate valves suitable for intercepting products in powder, granules, fibers and heavier materials - Size 150 - 200 - 250 - 300 - 350 - 400 - 500 - 600 - 700 - 800 mm - One-piece valve body in ...

DN: 15 mm - 1,000 mm
Pressure: 16 bar - 420 bar

... ball valve with full range of control applications is available with superior flow control. These 1/4-turn control ball valves are more compact, lighter weight and much less expensive ...

DN: 50 mm - 600 mm
Pressure: 16 bar - 420 bar

... short pattern to satisfy the different installation requirements. This compact one body design reduces the weight and requires space compared with installing two conventional valves when it achieves safer ...

DN: 20 mm - 300 mm
Pressure: 16 bar - 420 bar

Single-seated Control Valve body material: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel end connection: operation:the PDL series pneumatic diaphragm actuator, PCL series pneumatic piston actuator, electric ...