DN: 50, 25, 40, 16 mm
Pressure: 5 bar - 7 bar
Temperature: 200, 50, 250, 80 °C
... The compact mini UHV gate valve featuring a modular actuator concept is well suited for industrial and R&D applications. It is often used in pipings of semiconductor process systems. ...
VAT Vakuumventile AG
Pressure: 315 bar
Temperature: -40 °C - 65 °C
... Robust & compact patented design up to 315 bar (4000 cycles tested) - Excellent gasket resistance up to 60 blow downs - New handwheel design with integrated rupture safety - Easy guard replacement during maintenance thanks to the ...
DN: 80 mm - 100 mm
Pressure: 16 bar
... description
Butterfly
valve with EPDM O-ring, made from UPVC (U-PVC), available in DN80 and DN100 sizes (PN16).
Product details
- Brand: U-PVC Check Valves
- Category: Check Valves
- Type:
DN: 0.75 in
Pressure: 5 bar
Temperature: -25 °C - 85 °C
... proportional flow control valve FC1500 and a MEMS gas flow meter. FC1500 is a highly refined needle valve driven by a micro step stepper motor. Turndown ratio can reach up to 400:1, with high accuracy, ...
KaoLu
DN: 0.125 in
Pressure: 2 bar - 11.5 bar
Temperature: 0 °C - 70 °C
... proportional control valve. This series is an electronically controlled closed loop pressure regulator. The device converts a command signal to customers' specified pressure range. The QKL-B1HF consists of a control circuit board, one ...
KaoLu
DN: 0.125, 0.375, 0.5 in
Pressure: -1 bar - 20 bar
Temperature: -20 °C - 84 °C
... Resolution Valve provides superior performance over legacy needle valves. Selection of stainless steel 316L, aluminum or PEEK body material. The high resolution electronic flow control valve The High ...
KaoLu
DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 1 MPa
Temperature: 0 °C - 60 °C
... range, compared to Pisco conventional standard speed controller. The industry's smallest and low profile. It has a very compact and low profile body as a speed controller with an indicator. Push-lock type knob. Easy to handle. Flow ...
NIHON PISCO CO., Ltd.
DN: 4, 6, 8 mm
Pressure: 0.1 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C
... Orifice Flow Controller Preset Flow Control Valve (Tamper-Proof) preset flow control valve makes constant-flow in one direction and unrestricted flow in the opposite by an orifice restrictor. It is best suited for use ...
NIHON PISCO CO., Ltd.
DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C
... without an external needle for speed adjustment. Approx. 2/3 height of the conventional Speed Controller.* Suitable for a small space. *Compared to the max. height of the conventional Speed Controller. Selectable from 2 types. 360°rotatable ...
NIHON PISCO CO., Ltd.
DN: 6 mm - 80 mm
Pressure: 0 bar - 25 bar
Temperature: -10, 180 °C
... compatible angle seat globe
valve with plastic actuator
The 2/2-way angle seat globe
valve GEMÜ 554has a plastic piston actuator and is pneumatically operated. The
valve spindle is sealed by a ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 6 mm - 80 mm
Pressure: 0 bar - 25 bar
Temperature: -40, 210 °C
... Universal angle seat globe
valve made of stainless steel
The 2/2-way angle seat globe
valve GEMÜ 550 has a low-maintenance stainless steel piston actuator and is pneumatically operated. The
valve ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 15 mm - 100 mm
Pressure: 0 bar - 40 bar
Temperature: -10 °C - 210 °C
... Robust globe
valve with aluminium actuator
The 2/2-way globe
valve GEMÜ 532 has a robust aluminium piston actuator and is pneumatically operated. The
valve spindle is sealed by a self-adjusting ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 0.25 in - 0.75 in
Pressure: 0 psi - 250 psi
Temperature: -18 °C - 70 °C
... ANVER’s two-way ball valves are compact and easy to use. Activated manually for basic on/off pressure control or vacuum applications, these durable ball valves provide a tight connection for optimal stop/flow ...
DN: 0.375 in - 1 in
Pressure: 0 psi - 250 psi
Temperature: -18 °C - 121 °C
... release • Forged body design, extends the life of the ball valve • Optimum flow design. • Blow-out proof stem • Locking handle for added safety • More economical and compact than 3-way valves • ...
DN: 0.25 mm
Pressure: 10 bar
Temperature: -20 °C - 80 °C
... ball valve - Ball bore: borehole through the middle, DN 4 mm wide - Connections: 2 x G 1/4" i - Front-panel mounting - Corrosion-resistant - High level of gas tightness - Material of sample-contacting parts: PVDF, Viton® The compact ...
DN: 0.25 mm
Pressure: 4 bar
Temperature: 80 °C
... according to the application-specific requirements. Using the compact fine adjustment M&C RV 11-… needle valves, this is possible in a reliable and exact manner thanks to the optimum design of the valve ...
Pressure: 0.5 bar - 250 bar
Temperature: -20 °C - 200 °C
... WEH® Screw-in Valve TVR400, stainless steel - Series The screw-in valves of the WEH® TVR400 series are mechanical shut-off valves which allow the media to flow in the direction of screw rotation and ...
Pressure: 0 bar - 2 bar
Flow rate: 0 l/min - 120 l/min
... Common industries that use pinch valves for the benefits of isolating fluid from a mechanical valve include: drug dispensing, laboratory equipment, waste water, medical devices, chemical, food and beverage equipment, ...
Clippard
DN: 8 mm
Temperature: 5 °C - 50 °C
... These 8 mm proportional direct-acting valves provide precise, linear control for accurate dosing and flow regulation in critical applications. With low power consumption, they offer excellent energy efficiency while maintaining quiet ...
Clippard
Pressure: 2 bar
Temperature: 0 °C - 70 °C
Flow rate: 60 l/min
... NIV series multi-channel gradient valves feature multiple 2-way, normally-closed PTFE media isolation valves connected around a central body. This unique design provides significant reduction in internal volume with enhanced ...
Clippard
DN: 15 mm - 250 mm
Pressure: 10 bar - 40 bar
Temperature: -60 °C - 350 °C
... The sliding gate control valve type 8043 in a reinforced version and long design with piston actuator and integrated positioner is due to its compact design universally applicable for neutral and aggressive media in the ...
Schubert & Salzer Control Systems GmbH
DN: 15 mm - 125 mm
Pressure: 10 bar - 40 bar
Temperature: -60 °C - 230 °C
... This compact motor valve is used in a wide range of process engineering control tasks. It is particularly characterised by its very short design. Most media such as steam, fluids, gases, etc. can be excellently controlled ...
Schubert & Salzer Control Systems GmbH
DN: 15 mm - 150 mm
Pressure: 0 bar - 40 bar
Temperature: -60 °C - 350 °C
... control valve type 8020 with NAMUR interface for universal positioner assembly is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. are easy to handle. For high speed and cycling applications ...
Schubert & Salzer Control Systems GmbH
DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
... DIALOCK® diaphragm valve with stroke limiter and male ends for solvent welding, metric series. The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The ...
FIP - Formatura Iniezione Polimeri
DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
... applications requiring very frequent valve operation and a long valve lifetime. Main features: High visibility graduated optical position indicator protected by a transparent cap with a seal O-Ring Compact ...
FIP - Formatura Iniezione Polimeri
DN: 15 mm
Pressure: 6 bar
Temperature: -20 °C - 140 °C
... Compact diaphragm valve with male ends for solvent welding, metric series. The CM is a manually operated diaphragm valve of reduced dimensions and particularly compact structure, ideal ...
FIP - Formatura Iniezione Polimeri
DN: 32, 40 mm
Pressure: 16 bar
Temperature: 5 °C - 85 °C
... IP67 Operating time: 45 sec for 90° rotation – 22Nm Protected type, manual emergency override, 2 extra micro switches BUTTERFLY Wafer valve PN16 Body and disc in GG25, polyamide covering, seal seat: Nitrile ...
DN: 25, 32 mm
Pressure: 16 bar
Temperature: -10 °C - 120 °C
... Operating time: 45 sec for 90° rotation – 22Nm Protected type, manual emergency override, 2 extra micro switches 2-way CAST IRON ball valve, FLANGED, full bore PN16 ...
DN: 22 mm
... Actuator with programming clock on-board For all application in which the valve manoeuvring must be at intervals or scheduled times COMPACT 22 Nm with ISO 5211 connection ...
Pressure: 15 bar
Temperature: 0 °C - 60 °C
... need to minimise downtime in the field. Available in two versions, the Mini Flat Valve is specially designed for use with Elcometer 1020 Blast Machines whilst the larger Flat Valves can be applied ...
DN: 0 mm - 1.5 mm
Pressure: 0 bar - 34.7 bar
... The needle valve is an adjustable orifice, which can be used to control flow rates, mini-cylinders, nozzles, timing circuits, filling heads, bleed vents, and in many other applications. The adjusted flow remains stable even during temperature ...
Beswick Engineering Co, Inc.
DN: 1 mm - 1.1 mm
Pressure: 0 bar - 13.8 bar
... The MSV series slide sleeve valve provides an efficient in-line three-way valve. When the sleeve is moved to the “ON” position, fluid is allowed to pass through the valve. When the sleeve is moved to ...
Beswick Engineering Co, Inc.
DN: 1.78 mm
Pressure: 500 psi
... Beswick’s miniature ball valve is an excellent choice for applications requiring a compact on/off valve. This design offers small size, light weight, and non-restricted ...
Beswick Engineering Co, Inc.
DN: 1.5 mm - 56 mm
Pressure: 0 psi - 142.2 psi
Temperature: -15 °C - 80 °C
... / BFF, The float valve has one major function and that is to stop the flow of water from an inlet supply line. The float valve rises as the water level rises. Once a specified water level is reached, this will cause ...
Elite Line Industrial Corp.
DN: 6, 3, 4 in
Pressure: 1 bar - 12 bar
Temperature: -15 °C - 80 °C
... Control Pressure Reducing Valve reduces pressure of inlet flow into desired outlet pressure. Pressure Reducing Valve can prevent damage within pipelines due to high pressure. Unique piston design to exclude conduit piping, ...
Elite Line Industrial Corp.
DN: 25, 32, 40, 50 mm
Pressure: 20.7 bar
... Test and Drain Valve is a compact three-in-one valve combining shut-off, test and drain functions for wet pipe fire sprinkler systems. UL Listed and designed to meet NFPA requirements, it provides a space-saving ...
Elite Line Industrial Corp.
DN: 50 mm - 150 mm
... Whether it is silos, mills or extraction systems, our slide valves enable a safe isolation, and are also available for demanding CIP, dust or gas applications. The REDEX® slide valve is suitable for the isolation of fully ...
DN: 50 mm - 500 mm
... Whether it is silos, mills or extraction systems, our slide valves enable a safe isolation, and are also available for demanding CIP, dust or gas applications. The RSV slide valve is suitable for the isolation of fully ...
DN: 6 mm - 150 mm
Pressure: 20 bar
... Multiport valve blocks are often installed when complex solutions in process engineering systems are required. Compared with welded designs, these valves require minimal space and are optimised to prevent deadleg. The ...
DN: 6 mm - 150 mm
Pressure: 20 bar
... Multiport valve blocks are often installed when complex solutions in process engineering systems are required. Compared with welded designs, these valves require minimal space and are optimised to prevent deadleg. The ...
Pressure: 13 bar - 50 bar
Temperature: -29 °C - 204 °C
DN: 0.11 in - 0.56 in
Pressure: 1,550 bar
Temperature: -50 °C - 230 °C
... thus a high reliability of the valve. These MAXIMATOR high pressure valves with metal sealing have a high level of safety and reliability under adverse operating conditions. These valves may be employed ...
Maximator GmbH
... needle valves, fittings, tubing, check valves, adapters and couplings as well as accessories for High Pressure Applications up to 217,000 psi(15,000 bar). Product features long lasting durability high performance ...
Maximator GmbH
DN: 90 mm
Pressure: 4 bar - 8 bar
Temperature: -20 °C - 80 °C
... Slow fill processes for compact filling stations • Hydrogen filling of two-wheelers • Pressure release of dispenser filling hoses ...
Maximator GmbH
Temperature: -20 °C - 40 °C
... Vacuum Valves, 3 Channels, AG Series . Connection on the vacuum network . Electric control . Voltage: 12 VDC / 24 VDC ou 24 VAC / 110 VAC / 220 VAC . NO or NC for the vacuum or compressed air supplied servo Characteristics . Fluid ...
DN: 0.25, 0.5 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C
... > - Media:Compressed Air, Filtered & Lubricated Features Cartridge Type design for Long life Lubrication not essential The head can rotate 180 20 Lacs Cycle tested ...
UFLOW AUTOMATION
DN: 0.25, 0.5 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C
... Media - Compressed Air, Filtered & Lubricated Features Cartridge Type design for Long life Lubrication not essential The head can rotate 180 20 Lacs Cycle tested ...
UFLOW AUTOMATION
DN: 0.25, 0.5 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C
... Media - Compressed Air, Filtered & Lubricated Cartridge Type design for Long lifeCompact designLubrication not essentialThe head can rotate 18020 Lacs Cycle tested Features Cartridge Type design for Long life Lubrication not essential The head ...
UFLOW AUTOMATION
DN: 80 mm - 300 mm
Pressure: 16 bar
Flow rate: 10 m³/h - 1,600 m³/h
... ELECTROHYDRAULIC ON/OFF VALVE The valve opens fully or shuts off in response to electric signals. The valve is controlled by a solenoid that allows control liquid to flow in the upper chamber in order ...
Tecnidro
DN: 80 mm - 300 mm
Pressure: 1 bar - 16 bar
Flow rate: 10 m³/h - 1,600 m³/h
... ALTITUDE CONTROL VALVE This valve controls water level in high level reservoirs to avoid overflow, without any external control system like float control etc. The valve remains completely open until ...
Tecnidro
DN: 80 mm - 300 mm
Pressure: 1 bar - 16 bar
Flow rate: 10 m³/h - 1,600 m³/h
... PRESSURE REDUCING VALVE The valve reduces high upstream pressure to a pre-set lower and constant downstream pressure level, regardless of fluctuating flow or varying upstream pressure. A hydraulic regulating pilot ...
Tecnidro
DN: 10 mm - 50 mm
Pressure: 4.5, 6 bar
... operated pinch valves can also be offered with alternative individually customised connections. Structure of VMP series The structure of the VMP series air operated pinch valves encompasses the sleeve, a body and two ...
AKO ARMATUREN
DN: 10 mm - 50 mm
Pressure: 6 bar
... the VM series pneumatic pinch valves can also be offered with alternative individually customised connections. For information on advantages of AKO pinch valves and their functions, see air operated pinch valves. Pinch ...
AKO ARMATUREN
DN: 10 mm - 150 mm
Pressure: 6 bar
... Structure of Pinch Valve with tri-clamp The structure of the VMC series air operated pinch valves encompasses the sleeve a body and two collar caps. The pinch valve sleeve is positioned in the centre ...
AKO ARMATUREN
DN: 0 mm - 10,000 mm
Pressure: 7,500 psi
... Overview
- SPC-CTRL-75K is a high-pressure control valve designed for precise regulation of fluid pressure in industrial systems.
- Compact design suitable for integration in high-pressure lines
DN: 2.4 mm - 18 mm
Pressure: 70 bar - 206 bar
... and check valves with integral Lok tube ends for instrumentation systems. The range covers fine-control needle valves (including graphite-packed models for high-temperature service), compact ball valves ...
DN: 15 mm - 150 mm
Pressure: 10 bar - 40 bar
... Product overview
A
compact wafer-type full-bore ball
valve rated to ANSI Class 150 and PN10/16/40. Lightweight and space-saving, constructed in CF8M stainless steel. Available in multiple designs (Standard, ...
DN: 15 mm - 300 mm
Pressure: 0 bar - 16 bar
... Overview
The UBF Series uni-body flanged ball
valves are one-piece body
valves designed for on/off and control applications in industrial fluid systems. They offer a
compact footprint and ...
Pressure: 0 bar - 40 bar
Temperature: 95 °C
... Externally controlled valve for the hydrogen sector Valves for hydrogen and oxygen in electrolyser operation Pneumatically operated 2/2-way valve - Direct pressure control Designed for electrolysers - ...
DN: 15 mm - 100 mm
Pressure: 10 bar
Temperature: 0 °C - 80 °C
... • Competitive ball valve to work in the water treatment sector • PTFE seats and joints in EPDM or FKM • Completely removable • Pressure -PN10 • Step ball T or step L • Available in PVC-U, PVC-C, PP thermoplastic materials • Connector ...
DIVATEC,SL
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 100 °C
... • BV ball valves for chemical fluids • PVC-U, PVC-C (HT), PP or PVDF thermoplastic materials • EPDM, FKM gaskets, on request we have a FKM FB with glass fiber loading for very corrosive fluid applications • PTFE ball seats • Bushing ...
DIVATEC,SL
DN: 20 mm - 75 mm
Pressure: 10 bar
Temperature: 0 °C - 100 °C
... To cut pipe systems Fluids Neutral media free of solids and aggressive liquid or gaseous media if the valve components that contact the media are resistant to the service temperature according to the Divatec resistance ...
DIVATEC,SL
DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C
... pneumatic rotary actuator. Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after other equipment like gas pressure regulators, gas meters etc. These ball valves ...
DN: 3 mm - 12 mm
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C
... Compact needle valve in aluminium housing Leak-free valve Spring loaded, non rising adjustment stem with 56-pitch thread provides smooth, non-reversing flow characteristics and 15-turn resolution Non-rotating ...
Mass Flow ONLINE BV
DN: 0.5 in
Pressure: 0 psi - 5,000 psi
Temperature: 70 °F - 1,000 °F
... This globe control valve features a 1/2" body with 150 lb ANSI raised face flanges. It is designed to fit directly into pipelines of the same flange size and rating. Its compact size and light weight make it especially ...
Badger Meter
Pressure: 0 bar - 400 bar
... etc. The By-Pass valve is controlled from the driver’s cab and makes it possible to provide oil to the vehicle’s hydraulic equipment when necessary. .. • Compact design for direct mounting on the pump’s connection ...
Sunfab Hydraulics
DN: 0.25 in - 6 in
... Four horizontal ports. Minimized dead legs, compact in space for easier installation and safer operation in constrained spaces. Variety of ball configurations for different flow patterns in both automatic and manual configurations. Total ...
DN: 50 mm - 500 mm
Pressure: 16, 10 bar
... Compact butterfly valve for installation between flanges EN 1092, PN 10/16 and ASME Class 150. Two-piece body, self-centring, valve disc and shaft in one piece. Wear and abrasion resistant design, without ...
GEFA Processtechnik
DN: 0.375 in - 2 in
Pressure: 0.2 bar - 20 bar
Temperature: -60 °C - 225 °C
... Robust, proportional overflow valve - gastight version. Allround overflow valve for pump protection and bypass control applications, due to its compact design, possibility of user-adjustment within the ...
Goetze KG
DN: 4 mm
Pressure: 0 bar - 6 bar
Temperature: 0 °C - 140 °C
... pressure) via membrane; relief valve for overpressure
Pressure: 29.4, 31.6, 35.7, 42.2, 49.6 bar
Temperature: 38, 100, 200, 300, 400 °C
... A winning team: compact, robust steam trap with no loss of steam, combined with all stop valves and with test and drainage function. The TrapStation TS 36 encompasses the universal connector, two stop valves ...
DN: 0.125 in
Pressure: 0 bar - 12 bar
Temperature: -20 °C - 60 °C
... The cartridge Top- valve was especially developed for gas extraction from cartridges / bottles. The cartridge top valve can be combined with the cartridge pressure regulator ED 06 or with the flow meter E12. Low weight ...
Pressure: 0 psi - 125 psi
Temperature: -29 °C - 149 °C
... venting the downstream pressure to atmosphere when in the off position. These valves are compact in size and can be utilized for in-line and panel mount applications. Valves can be ordered Cleaned and ...
Pressure: 5,000, 3,000 psi
Temperature: 0 °F - 225 °F
... Use to slowly or quickly bleed pressure from a line after a calibration is complete • Easily connect between the end of a Quick-test hose and the process connection • Keep fluid or contaminates out of the hand pump, calibrator or nitrogen control ...
the best suppliers