Pressure: 250 bar
Flow rate: 120 l/min
... CV120 valve is a very compact valve where a variable priority flow divider is combined with a directional control valve in one body. This reduces both cost and size by reducing the required ...
DN: 50 mm - 300 mm
Pressure: 1 MPa
Temperature: 200 °C
... RDV rotary disc gate valve The valve plate is driven by the rotating shaft, so that the motion of the valve switch is rotating. The piston rod of the pneumatic actuator does not contact with the medium ...
Zhejiang Gute Pneumatic Machinery Co., Ltd
DN: 0.25, 0.5 in
Pressure: 40 bar
Temperature: -40 °C - 100 °C
... powered mass flow meters red-y compact series. Tightly Closing Valves The valves are tight-closing Different Device Setups The valves are available as straight valves ...
DN: 0 mm - 10,000 mm
... pressure; stable outlet flow; reliable sealing performance; compact design; easy venting
Pressure: 5 bar - 30 bar
Temperature: 10 °C - 50 °C
... from a quantity of 0.04 cm³ using the dosing principle with endless pistons. The PDV04 proportional dosing valve is an endless dosing valve and consists of an electrically driven piston metering unit. The parameterization ...
DN: 90 mm - 225 mm
Pressure: 16 bar
... Resilient seated gate valve combined with flange T-Piece Space saving installation through short design as well as savings in material, work, transport and storage costs The compact design enables the valve ...
Hawle
DN: 0.375, 0.5 in
Pressure: 0 bar - 5 bar
Temperature: 0 °C - 100 °C
... PEKI valve series made in germany has been manufactured for decades from high-quality brass components that are assembled with modern injection-moulded parts and sealing elements made in Germany. The PEKI compact valve ...
PVA Schwimmerventile GmbH
DN: 15 mm - 1,000 mm
Pressure: 16 bar - 420 bar
... flow control. - These electric design 1/4-turn control ball valves are more compact, lighter weight and much less expensive than comparably sized globe valves and segmented control valves ...
Athena Engineering S.r.l.
Pressure: 22 MPa - 25 MPa
Temperature: -20 °C - 80 °C
Flow rate: 20 l/min - 60 l/min
... descending. in v/hich the descending function can realize proportional descending by controlling ttie moving position of the valve, which is applicable to the occasion of single-acting cylinder. The second link can realize three functions ...
Weifang Chengfeiyue Hydraulic Machinery Co., Ltd.
DN: 1 in - 10 in
Pressure: 0 bar - 420 bar
Temperature: -120 °C - 650 °C
... one device including one upstream valve, one quick action line blind and one downstream valve. The mechanical safety interlock between the Line Blind and the valves prevents any operation of the Line ...
DN: 4, 6, 8, 10, 12 mm
Pressure: 1 MPa
Temperature: 0 °C - 60 °C
... m Outer diameter of pipeline Φ 4 incidents When the rotary knob of the 3-way valve is closed, residual gas is discharged from side A (there is no exhaust port in the valve body, and it is discharged along the knob structure) ...
Pressure: 29.4, 31.6, 35.7, 42.2, 49.6 bar
Temperature: 38, 100, 200, 300, 400 °C
... A winning team: compact, robust steam trap with no loss of steam, combined with all stop valves and with test and drainage function. The TrapStation TS 36 encompasses the universal connector, two stop valves ...
DN: 8 mm - 50 mm
Pressure: 16 bar
Temperature: -20 °C - 150 °C
... pneumatic actuator and valve into one body, eliminating packing glands, actuators and mounting kits. There are no exposed moving parts, eliminating pinch points and increasing operator safety. Since the actuator is part of the valve, ...
FLAPCON VALVES AND AUTOMATION SYSTEMS CO LTD
... Application : Used in sanitary processes when you need a valve for isolation or control of the flow of a product. The 3-piece design allows for seat and/or ball replacement without removing the valve from the process ...
DIXON GROUP EUROPE
DN: 0.5 in - 2 in
Pressure: 16 bar
Temperature: 0 °C - 100 °C
... Advantages • Compact design allowing install in reduced space plants • Versatile design allowing multi-unit installation • Maximum versatility of use with spacer to protect the cylinder from non-compatible fluids Applications The ...
MAROS Engineering
DN: 25 mm
Pressure: 0 psi - 400 psi
Flow rate: 0 us gal/min - 25 us gal/min
... COMPACT PUMP PRESSURE VALVE- Reduces rapid pump cycling and maintains a pre-set operating pressure for wells. Threaded female I.D.x male O.D. on inlet and outlet connections. Features a low lead alloy body & cover, Nylon ...
DN: 32, 25, 20, 15, 40 mm
Pressure: 16 bar
Temperature: -20 °C - 130 °C
... 1. The combination valve integrates oil separation seat, oil filter seat, minimum pressure valve, and temperature control valve, with a compact structure; 2. The temperature control ...
DN: 50 mm - 200 mm
Pressure: 10, 16 bar
... Ideally suited for flow control in a minimum piping space • Easy to mount actuator with flat zone design at the top of valve ...
DN: 15 mm - 65 mm
Pressure: 2 bar - 16 bar
Temperature: -10 °C - 180 °C
... Repeatability: < 1.0% FS Failsafe: valve closes (NC) in the event of voltage failure, optionally outlet fail freeze feature Control_ valve_body: bronze, optionally SST 316L Cone_seal: PTFE Proportional_ valve_body: ...
DN: 15 mm - 50 mm
Pressure: 20, 50, 100 bar
Temperature: -29 °C - 425 °C
... high tightness (leakprooftightness class A according to EN – 12266 – 1) environment friendly tests according to API 598 or EN 12266-1 installation length according to DIN 3202 for classes according to ANSI B16.10 according to EN ...
ZETKAMA Sp. z o.o.
DN: 200 mm - 1,000 mm
Pressure: 0 bar - 7 bar
Temperature: -25 °C - 180 °C
... requirement of a leakage rate of 0.5 l/h at 20 mbar g Closing of the valve is dampened to reduce pressure surges in the pipeline Double seat – one valve instead of two separate valves – compact ...
Kühme Armaturen GmbH
Pressure: 5,000 psi - 15,000 psi
Temperature: -29 °C - 121 °C
... Plug valve is a necessary part in cementing and fracturing operation in oil and mining fields as well as similar high pressure liquid control. It features compact structure,easy maintenance, low torque, quick opening ...
... compared to the conventional Double Block & Bleed Valve assemblies. As a secondary seal, the valve is provided with a lubrication system which allows feeding a special lubricant into the valve while ...
DN: 0.75, 1, 1.5, 2 in
... technologies to allow fast, simple, compact, reliable and environmentally friendly depressurizing, venting and safe draining of piping systems. Performance is far superior when compared to conventional three valve configurations. Features/Benefits ...
... Manifold valves stack multiple hydraulic valves on different levels of a single valve assembly according to the hydraulic principle diagram to achieve a variety of functions through an internal oil passage. ...
the best suppliers