DN: 0.5, 0.75 in
Pressure: 20.7 bar
Temperature: 149 °C
... The HAT/FP is a reliable and automatic freeze protection valve designed to protect water resupply lines from freezing. This thermostatic valve controls flow based on temperature variations to prevent frozen or bursting ...
Thermomegatech
DN: 0.125 in
Pressure: 60, 100 psi
Temperature: -18 °C - 49 °C
... Manifold sample valve assures continuously flowing, contemporary samples in conjunction with the Sentry Sample Sequencer 5. The unique manifold design provides flow in two directions from the open valve, eliminating dead ...
Sentry Equipment
DN: 15 mm - 25 mm
Pressure: max 6.0 bar
... annular passage. The annular passage cross-section is dependent on the overall size of the valve and amounts to about 50% of the valve inlet cross-section. Valves are located on the end faces of the ring ...
DN: 25 mm - 150 mm
Pressure: 10 bar
... health-hygiene applications, this valve means a reduction in the number of single seat valves required and consequently optimizes the use of available installation space. The valve bodies and balanced ...
BARDIANI VALVOLE S.p.a.
Pressure: 250 bar
Flow rate: 120 l/min
... CV120 valve is a very compact valve where a variable priority flow divider is combined with a directional control valve in one body. This reduces both cost and size by reducing the required ...
DN: 0.5 in
Pressure: 100 psi
Temperature: 180 °F
... The NIBCO® PEX mini ball valve is made of lead-free* Performance Bronze alloy. Because of its compact design, the mini ball valve is ideal for use in a NIBCO® PEX piping ...
DN: 0.5 in - 1 in
... The Apollo® lead free* Pressure Reducing Valve Model PRE (36ELF Series) is designed to conserve water and protect water distribution systems by automatically reducing elevated supply pressures. The dezincification resistant bronze body, ...
... - Regulating valve, Elbow regulating valve - Fine regulating valve, Elbow fine regulating valve - Taper seat non-return valve - Needle valve - Stop cock - ...
DN: 20 mm - 100 mm
Pressure: 3.5 bar - 6 bar
Temperature: 150 °C
... wide range of optional and fully customizable according to project requirements. Fully draining Minimized dead leg Compact body Small welding pad CIP/SIP cleanable/sterilizable No product entrapment Minimized diaphragm’s ...
AERRE INOX Srl
DN: 0.125 in
Pressure: 25 psi - 125 psi
Temperature: -18 °C - 46 °C
... control valves are compact 1/8 ported 4-way valves that may be actuated by hand, remote air signal, electric signal, or mechanically by a machine element. LTV valves are ideal for powering ...
Bimba
DN: 1 mm
Pressure: -70,000 Pa - 200,000 Pa
Temperature: 5 °C - 80 °C
... only to proportional valves. The advantages of minimal space occupancy, fast response, small internal diameter, and small influence on fluidic system fluctuations are definitely your best choice. Feature ...
DN: 5 mm
Pressure: 0.5 bar - 10 bar
Temperature: 5 °C - 75 °C
... 2/2-way, latching cartridge valve with a nominal orifice DN 5 with a mechanical valve actuation. By manual operation, at a push of a button so to speak, the valve opens and closes. The manual actuation ...
A. u. K. Müller
DN: 10 mm - 50 mm
Pressure: 25 bar
Temperature: 0 °C - 120 °C
... the SAUTER Valveco compact regulating valve provides correct supply to the consumers and a reduction of temperature variations in the room, so that the use of energy is more accurate and more efficient. Features Regulating ...
DN: 15 mm - 50 mm
Pressure: 4 bar
Temperature: -20 °C - 80 °C
... The pinch valves from Ross has a compact and economical design that is utilized for a broad range of applications in the industrial automation industries. It is ideally used for compressed air and other media. It is a ...
ROSS EUROPA
DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C
... PTFE or PE ball seating joint Double sealed shaft Seal materials - EPDM, FPM Ball seating joint - PE, PTFE Connections - PE fusion socket, PE fusion spigot, solvent socket, solvent spigot, threaded socket Approvals - EURASEC Hygienic ...
Praher Plastics Austria GmbH
DN: 25 mm - 100 mm
Pressure: 0 Pa - 1,000,000 Pa
Temperature: 0 °C - 95 °C
... customer-specific connection options. Product characteristics Hygienic, modular design - Maintenance-free switching valve - Safety and vacuum valves can be pneumatically vented - Materials of components in ...
Temperature: 50 °C
... in flood protection. Compact valve with self-contained frame design for wall mounting with anchors Vibration-free guiding of the gate over the entire travel; can be used in intermediate positions as control ...
VAG-Group
DN: 15 mm - 400 mm
Pressure: 55 bar
Temperature: -196 °C - 450 °C
... floating (seat supported) ball valves, incorporating mounting flanges to BS EN ISO 5211, featuring soft, metal and carbon seated designs There are two separate design types within the one piece Ultra-Seal range, depending upon valve ...
Pentair Valves & Controls
DN: 0.5 in - 2.5 in
Temperature: 105 °C
... Overview The Roda Deaco RDS1 Swing Gate Valve is a compact air intake shutoff valve that provides emergency overspeed shutdown of a diesel engine. The RDS1 Swing Gate Valve can be triggered ...
AMOT
DN: 70, 145 mm
Pressure: 400 bar - 2,800 bar
Flow rate: 0 l/min - 650 l/min
... Pneumatically Switching Valve PSV The reliable switching valve for a wide range of requirements. Available open or closed without actuating energy. Special features: Switchable under operating pressure, compact ...
URACA GmbH & Co.KG
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 160 °C
... A-BV1-F One-piece housing, short body, open passage, with flange connection to EN 1092-1 PN16, with flange for actuators to DIN / ISO 5211 Housing and ball made of 1.4408. Sealing material PTFE / glass fibre 15%. Temperature range -50 ° C to 200 ° C ...
DN: 0.75 in
Pressure: 10 bar
Temperature: 10 °C - 60 °C
... • Exclusive use in drain circuits. • Connections to rigid pipe or PE flexible pipe. • Female threaded end connectors. ...
Pressure: 10 bar
Temperature: 150 °C
... Aseptomag® single-seat shut-off valves are used for the controlled opening and closing of pipelines in UltraClean and Aseptic processing plants. Thanks to the compact design, the type AMV is ideal for fractional size ...
GEA Procomac S.p.A.
Pressure: 140 Pa - 840 Pa
Temperature: 1 °C - 60 °C
Flow rate: 0 l/h - 3,408 l/h
... function are customizable. 1-60℃ higher temperature range, suitable for shower softener. Internal outlet valve and manual mixed valve available. Various injectors, DLFC and BLFC. Dual power supply, lower ...
DN: 3 mm
Pressure: 35 MPa
Temperature: -15 °C - 60 °C
... NG10) Direct Type High Speed Linear Servo Valves – High-speed linear servo valves have outstanding features of high response and exceptional contamination resistance. These features are achieved by the compact ...
YUKEN Europe Ltd.
DN: 50 mm - 300 mm
Pressure: 1 MPa
Temperature: 200 °C
... RDV rotary disc gate valve The valve plate is driven by the rotating shaft, so that the motion of the valve switch is rotating. The piston rod of the pneumatic actuator does not contact with the medium ...
Zhejiang Gute Pneumatic Machinery Co., Ltd
DN: 0.25, 0.5 in
Pressure: 40 bar
Temperature: -40 °C - 100 °C
... powered mass flow meters red-y compact series. Tightly Closing Valves The valves are tight-closing Different Device Setups The valves are available as straight valves ...
Pressure: 0 psi - 125 psi
Temperature: -20 °F - 180 °F
... Any TAC Push Button Valve may be operated with a choice of four TAC Air Pilot Operators. Valves are miniature 2, 3 and 4-way, and available in 10-32 UNF, 1/8 and 1/4 pipe sizes. Thread Air Pilot Operator ...
Humphrey Products
DN: 0.125, 0.25, 0.375 in
... This hand pull valve is designed for efficient manual control in various industrial applications. It features a robust construction to ensure durability and reliability in demanding environments. The valve is easy to ...
DN: 0 mm - 10,000 mm
... pressure; stable outlet flow; reliable sealing performance; compact design; easy venting
Pressure: 5 bar - 30 bar
Temperature: 10 °C - 50 °C
... from a quantity of 0.04 cm³ using the dosing principle with endless pistons. The PDV04 proportional dosing valve is an endless dosing valve and consists of an electrically driven piston metering unit. The parameterization ...
DN: 90 mm - 225 mm
Pressure: 16 bar
... Resilient seated gate valve combined with flange T-Piece Space saving installation through short design as well as savings in material, work, transport and storage costs The compact design enables the valve ...
Hawle
DN: 0.375, 0.5 in
Pressure: 0 bar - 5 bar
Temperature: 0 °C - 100 °C
... PEKI valve series made in germany has been manufactured for decades from high-quality brass components that are assembled with modern injection-moulded parts and sealing elements made in Germany. The PEKI compact valve ...
PVA Schwimmerventile GmbH
DN: 15 mm - 1,000 mm
Pressure: 16 bar - 420 bar
... flow control. - These electric design 1/4-turn control ball valves are more compact, lighter weight and much less expensive than comparably sized globe valves and segmented control valves ...
Athena Engineering S.r.l.
Pressure: 22 MPa - 25 MPa
Temperature: -20 °C - 80 °C
Flow rate: 20 l/min - 60 l/min
... descending. in v/hich the descending function can realize proportional descending by controlling ttie moving position of the valve, which is applicable to the occasion of single-acting cylinder. The second link can realize three functions ...
Weifang Chengfeiyue Hydraulic Machinery Co., Ltd.
DN: 1 in - 10 in
Pressure: 0 bar - 420 bar
Temperature: -120 °C - 650 °C
... one device including one upstream valve, one quick action line blind and one downstream valve. The mechanical safety interlock between the Line Blind and the valves prevents any operation of the Line ...
DN: 4, 6, 8, 10, 12 mm
Pressure: 1 MPa
Temperature: 0 °C - 60 °C
... m Outer diameter of pipeline Φ 4 incidents When the rotary knob of the 3-way valve is closed, residual gas is discharged from side A (there is no exhaust port in the valve body, and it is discharged along the knob structure) ...
DN: 8 mm - 50 mm
Pressure: 16 bar
Temperature: -20 °C - 150 °C
... pneumatic actuator and valve into one body, eliminating packing glands, actuators and mounting kits. There are no exposed moving parts, eliminating pinch points and increasing operator safety. Since the actuator is part of the valve, ...
FLAPCON VALVES AND AUTOMATION SYSTEMS CO LTD
... Application : Used in sanitary processes when you need a valve for isolation or control of the flow of a product. The 3-piece design allows for seat and/or ball replacement without removing the valve from the process ...
DIXON GROUP EUROPE
DN: 0.5 in - 2 in
Pressure: 16 bar
Temperature: 0 °C - 100 °C
... Advantages • Compact design allowing install in reduced space plants • Versatile design allowing multi-unit installation • Maximum versatility of use with spacer to protect the cylinder from non-compatible fluids Applications The ...
MAROS Engineering
the best suppliers