GEMU valves for industrial applications
DN: 2.5 mm
Pressure: 2 bar - 10 bar
Temperature: 0 °C - 60 °C
Microvalves with plug button 3/2 NO or NC with several actuation options, mechanical or manual. Thanks to the usage of the adaptor all actuators can be mounted on microvalves and it is also possible to combine two microvalves to obtain ...
DN: 0.375, 0.5, 0.125, 0.25 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
The stop valve is a pneumatic device that locks the cylinder’s stroke in case of pressure loss in the system. The valves are mounted directly on the cylinder’s supplying ports and do ...
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
PRESSURE REDUCING VALVE The valve reduces high upstream pressure to a pre-set lower and constant downstream pressure level, regardless of fluctuating flow or varying upstream pressure. A hydraulic ...
Tecnidro
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
ELECTROHYDRAULIC ON/OFF VALVE The valve opens fully or shuts off in response to electric signals. The valve is controlled by a solenoid that allows control liquid to flow in the upper ...
Tecnidro
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
... maximum pre-set value. A hydraulic regulating pilot drives the valve. The pilot is able to detect upstream pressure values and regulates closing steps of the valve until the pre-set pressure ...
Tecnidro
Pressure: 17.2 bar
... activate an actuator to open the deluge valve: a pneumatic Dry Pilot detection Line and/or an electric solenoid, connected to sensorst hrough a control panel. Once open, the valve reduces ...
Raphael Valves Industries (1975) Ltd
DN: 40 mm - 250 mm
Pressure: 17.2 bar
... minimum head loss. * The valve trips open automatically upon a gradual release of water pressure from its control chamber. The valve is actuated by an electric signal conveyed to the valve’s ...
Raphael Valves Industries (1975) Ltd
DN: 40 mm - 250 mm
Pressure: 17.2 bar
... state. If at set state, water from the valve’s upstream passed through the actuator and maintained the deluge valve close, then now the actuator drains the deluge valve’s control chamber. ...
Raphael Valves Industries (1975) Ltd
DN: 0.25 in
Pressure: 0 bar - 200 bar
Temperature: -20 °C - 70 °C
... cylinder pressure. The rossignol valve can not be used for pres- sure control. The metering valve Rossignol will be used for industrial applications ...
DN: 3 mm
Pressure: 300, 40 bar
Temperature: -20 °C - 70 °C
HP 500 is a metal diaphragm shut-off valve. Diaphragm shut-off valves are system components for central gas supply units and can be used for low pressure as well as ...
DN: 0.25, 0.375 in
Pressure: 0 bar - 40 bar
Temperature: -20 °C - 70 °C
The 90° shut-off valve HP 501 is a shut-off for point of use regulators. The HP 501 is a shut-off valve will be used with pressure regulator HP 410 as a point of use regulator for laboratory ...
DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 1 MPa
Temperature: 0 °C - 60 °C
Flow rate can be set with indicator. Reducing the task of initial flow settings or their maintenance / replacement. The scales are on the side (upper / lower) and the top. Flow rate is proportional to the knob turns. 2 types with ...
NIHON PISCO CO., Ltd.
DN: 6, 8, 10, 12 mm
Pressure: 0.1 MPa - 0.7 MPa
Temperature: 0 °C - 60 °C
Large-flow type Speed Controller for driving device. Best suitable for high-speed operation cylinder. Large-Flow type with same size as Speed Controller series. For price options, please contact our distributor near your office. ...
NIHON PISCO CO., Ltd.
DN: 1.8 mm - 10 mm
Pressure: 0.1 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C
Low-flow type Speed Controller for driving device. Best suitable for the fine speed adjustments of low-speed cylinders. Precise control for low speed cylinder. Free flow rates are equivalent to those of standard products. Return ...
NIHON PISCO CO., Ltd.
DN: 15, 20, 25 mm
Pressure: 16 bar
Temperature: -10 °C - 110 °C
2 way MM BRASS Diamant ball valve 2-way MM BRASS with caps and tangs Full bore PN16 Code - Size - DN - PN - KVS DC2A2A - 1/2" - 15 - 16 - 16,3 DC2B2A - 3/4" - 20 - 16 - 29,5 DC2C2A - 1" - 25 - 16 - 43
Comparato Nello S.r.l.
DN: 20, 10, 15 mm
... 11Nm 3-way FFF BRASS horizontal ball valve Available with T or L sphere, full bore PN30 • - open and closed hydraulic Systems • - zone heating/cooling Systems • - drinking water Systems, with ...
Comparato Nello S.r.l.
DN: 10, 15 mm
... MOTORISED VALVE – 3 WAY FFF AISI 316 INDUSTRIAL USE ALL-IN-ONE actuator for 3 points without relay or 2 points with relay connection Class protection: IP67 Operating time: 35 sec for 90° rotation ...
Comparato Nello S.r.l.
DN: 3, 0, 4 in
Pressure: 230 mbar - 8,000 mbar
Temperature: -20 °C - 40 °C
... . 10/520 19/03/1955 and subsequent amendments. Valve is used to prevent any possible overfill during charging hazardous or dangerous fluids. Application: petrochemical. food. pharmaceutical ...
DN: 15 mm - 65 mm
Pressure: 0 bar - 10.2 bar
Temperature: 0 °C - 180 °C
Description Compact positioner with analogue control. Compressed air for remote control necessary. The stroke is made proportional to the flow through the paraboüc contour of the piston. The valve shuts ...
Pressure: 0 bar - 40 bar
Temperature: 95 °C
Externally controlled valve for the hydrogen sector Valves for hydrogen and oxygen in electrolyser operation Pneumatically operated 2/2-way valve - Direct pressure control Designed ...
DN: 15 mm - 50 mm
Pressure: 0 bar - 132 bar
Temperature: -46 °C - 400 °C
3 piece metal seated ball valve, for high temperature and clean services, in stainless stell or carbon stell, with lever or actuator, SW, BW, NPT, class 800Lbs
Penta Srl
DN: 0.5 in - 6 in
Pressure: 10 bar - 160 bar
Temperature: -46 °C - 400 °C
Metal seated Wafer Ball Valve construction with floating ball for high temperature services. There are three valve models: ● For low pressure services (AP10) ● For ...
Penta Srl
DN: 0.5 in - 2 in
Pressure: 138 bar
Temperature: -46 °C - 400 °C
The AP20P valve belongs to the AP series. It is equipped with metallic seats that permit that engineering of metal seated ball valves. It features ease of maintenance without requiring extra lapping of ...
Penta Srl
DN: 150 mm - 800 mm
Slide gate valves suitable for intercepting products in powder, granules, fibers and heavier materials - Size 150 - 200 - 250 - 300 - 350 - 400 - 500 - 600 - 700 - 800 mm - One-piece valve body in ...
DN: 80 mm - 100 mm
Pinch valves suitable for intercepting a wide range of products. - Size 80 - 100 mm - Valve composed of two identical half-bodies, both for the external part in aluminum and for the internal gasket - ...
DN: 50 mm - 900 mm
Pressure: 16 bar - 250 bar
... suitable for large caliber, high pressure pipeline fluid control. This series of fixed ball valve has the function of double blocking and releasing. The top structure can realize on-line ...
Athena Engineering S.r.l.
DN: 50 mm - 1,400 mm
Pressure: 16 bar - 420 bar
... soft-seated trunnion mounted ball valves are designed according to API6D standard and be offered two-piece and three-piece split body designs. The valves can be applied in wide pressure and temperature ...
Athena Engineering S.r.l.
DN: 50 mm - 2,400 mm
Pressure: 16 bar - 420 bar
... eccentric butterfly valve, with two-way sealing zero leakage, small torque characteristics, metal sealing valve seat can make it suitable for all kinds of harsh working conditions, the eccentric design ...
Athena Engineering S.r.l.
DN: 50.8, 3, 4 mm
Pressure: 10, 16 bar
Temperature: -10 °C - 140 °C
... Connection Wafer - API 609 (CAT - A) Range - DN40 - DN300 Suitable to - ASMI B16.5 150#, BS10 TABLE : E, F, H Pressure Range - PN10, PN16 Leakage Class - 100% Tightness at fully differential pressure Standard - ...
DN: 0.5 in - 3 in
Pressure: 40, 16, 25 bar
Temperature: -20 °C - 160 °C
Full bore · ISO-5211 mounting pad for actuators Characteristics •General industry application. •Blow-out proof stem design. •Triple system of sealing in the stem: 2 virgin PTFE joints and Fluoroelastomer ...
ABV
DN: 0.25 in - 2 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C
AISI-316 · BSPP ISO-5211 mounting pad to mount directly actuators Characteristics •General industry application. •Blow-out proof stem design. •100% tested with air & water (Open/Close). Specifications •Ends: BSPP ...
ABV
DN: 0.25 in - 4 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C
Full bore · AISI-316 · BSPP · BUTT WELD · SOCKET WELD ISO-5211 mounting pad to mount directly actuarors Characteristics •General industry application. •Blow-out proof stem design. •100% ...
ABV
Pressure: 0 psi - 29 psi
Temperature: 5 °C - 60 °C
• Compact series lineup that is perfect for small flow volume control of chemicals. Differential screw flow rate adjustment option can be selected for micro flow rate adjustment.
AWF
AWF
AWF
DN: 32 mm - 900 mm
Pressure: 6, 2.5, 16 bar
Temperature: -20 °C - 200 °C
PTFE lined centric butterfly valve for corrosive fluids and high-purity applications. Designed and manufactured for over 20 years in Switzerland, Bianca is built for long-lasting use in highly demanding ...
InterApp AG
DN: 0.5 in - 6 in
Pressure: 1 bar - 13 bar
Temperature: -15 °C - 180 °C
... Direct Acting Pressure Reducing Valve in Duplex Stainless Steel are popular in a variety of industries such as Offshore and near-shore operations, oil drilling, desalination, water treatment, chemical, marine ...
DN: 1.5 in - 56 in
Pressure: 0.3 psi - 8 psi
Temperature: -15 °C - 80 °C
... Presssure Sustaining Valve, also known as Back Pressure Valve, or Back Pressure Sustaining Valve, is a valve that maintain required pressure of inlet port by opening ...
DN: 0.375 in
Electro-Pneumatically operated pinch valve Low power 1.3W, high pinching force for 3/8" Silicon tube. other on request pharma, analyses, instrumentation
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... construction according to API 600 and ASME B16.34 , API 598 Test second , size flanges according to ASME B16.5 , EN 1092-1 and ISO 7005 and spacings between flanges according to DIN 3202 , EN 558-1 , ...
Di Nicola Infinam Srl
DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C
... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...
Di Nicola Infinam Srl
DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar
... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve ...
Di Nicola Infinam Srl
DN: 0.5, 1, 2 in
Pressure: 24, 17.2 bar
Temperature: 121 °C
... thermostatic mixing valves/diverting valves use a thermal actuator to accurately proportion and maintain flow in response to temperature. These 3-way thermostatic valves are used in a ...
DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C
... Group 1 • 100% full bore • Gate valves are bi-directional and can be installed in any position. However, the preferred orientation is with the stem pointing vertically upwards. Field of application • ...
Maran e Peracini srl
DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 150 °C
Cast iron (GJL 250) PN 16 gate valve oval body OS&Y stainless steel (AISI 304) trim 150°C (max). Made in Italy. Fields of application: Industrial plants - Sewage Water - Water treatment ...
Maran e Peracini srl
DN: 40 mm - 300 mm
Pressure: 10 bar
Temperature: 150 °C
Cast iron (GJL 250) PN 10 gate valve flat body OS&y; stainless steel (AISI 304) trim 150°C (max)
Maran e Peracini srl
DN: 10 mm - 50 mm
Pressure: 10, 16 bar
... NPT threaded connections • Pneumatic actuator DA, NO, NC or with electric motor 230V / 24V • Box with limit switches position indication (electromechanical and / or inductive) Advantage • High quality industrial ...
DIVATEC,SL
DN: 15 mm - 100 mm
Pressure: 10 bar
... Visual position indication Applications • Construction of chemical facilities • Construction of industrial facilities • Water treatment • Environmental technology Use • To block and also ...
DIVATEC,SL
DN: 15 mm - 32 mm
Pressure: 6 bar
... Visual position indication Applications • Construction of chemical facilities • Construction of industrial facilities • Water treatment • Environmental technology Use • To block and also ...
DIVATEC,SL
DN: 10 mm - 50 mm
Pressure: 63 psi
Temperature: -328 °F - 392 °F
... indicator. The valve upper section can be configured with three different actuator lengths depending on the application and operating environment. N2 for food/pharmaceutical applications O2 ...
Goetze KG Armaturen
DN: 300 mm - 3,000 mm
Pressure: 16 bar
Temperature: -25 °C - 300 °C
SAFETY QUICK-CLOSING BUTTERFLY FLAP VALVE TYPE PKIII/D Being part of the proven KÜHME high-performance valve series for industrial applications, the PKIII type is ...
Kühme Armaturen GmbH
DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: 200 °C
... industrial standard in terms of extended service life and durability in demanding and tough operating conditions. Fuels: gaseous Applications: Thermal Power Plants, Gas Turbines ...
Kühme Armaturen GmbH
DN: 65 mm - 300 mm
Pressure: 10 bar
Temperature: 400 °C
... through zero leakage Heavy duty design for highest number of operating cycles High-performance valve with a extended service life OPERATION DETAILS The linear movement of the valve ...
Kühme Armaturen GmbH
DN: 10 mm - 25 mm
screw connection G 3/8” – G 1” DN10 – DN25 material specifications housing, not in contact with medium: POM plastic (polyoxymethylene), natural white threaded cover: POM plastic (polyoxymethylene), natural white srews: galvanized ...
Ho-matic
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining