GHM brass flow switches
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
• Flow indication without power supply • Up to 30,000 l/h or 132.09 GPM (US) • Thread: G3⁄4…2, 3⁄4…2 NPT • -40…+300°C / -40…+570°F; max. 40 barg / 580 psig The DW 181 is an inline flow controller ...
The Series AFS Adjustable Flow Switches are externally adjustable piston-type flow switches for oils, liquids and gases. This Series offers an infinite number of flow ...
The FS-05 is a rugged brass flow switch with 22mm compression fittings for easy installation. • Rugged Brass housing • Minimum pressure drop • Operates from a small ...
TE CONNECTIVITY
... output. The FSH10 switches the output relay, once the flow rate through the pipe exceeds 20 l/min. The turn off time delay is adjustable between 0 and 10 seconds. • General purpose switch ...
Mechanical flow switch, for fluid or gaseous media, with spring-supported piston and magnetic triggering of a reed switch. Robust construction in brass ...
Senseca Germany GmbH
... triggering of a reed switch. ●Threaded connection ●Reed switch ●Low pressure loss ●Compact design ●Threaded connection ●Plug DIN 43650-A / ISO 4400 Ranges Details in ...
Senseca Germany GmbH
... and the triggering of a micro switch. ●Can be used from nominal width DN 25..200 ●Suitable for media with ferritic particles Ranges Details in the table correspond to horizontal inwards flow ...
Senseca Germany GmbH
New-Flow offers a large variety of products for measurement and control of temperature, pressure, flow, level, and valve. Pipe Size Range: 25~200 (1"~8"), large size is available Micro Switch: ...
New-Flow offers a large variety of products for measurement and control of temperature, pressure, flow, level, and valve. Micro Switch: SPDT, 15A 125, 250V 480VAC, ½A 125VDC, ¼A 250VDC Conduit: ...
... Repeatability Dirt-Resistance High Switch Capability The New-Flow FS35R Flow Switch for liquids or gaseous media with spring supported piston and magnetic actuation ...
... proven KOBOLD flow meters and switches model DSV are based on the principle of the well-known float-type flow meters, except for the conventional tapering measuring tube. These patented ...
KOBOLD Messring GmbH
... Universal flow switches for DN 20...200 Adjustment to nominal diameter and setpoint setting by shortening the paddle Threaded adapters for tees or pipe insertion installation SIKA flow ...
SIKA
... for welding guns; Flow control for water-soluble coolant; Flow control for cooling water for metal molds. The main features that distinguish the LFE flow ...
Riels Instruments
... output allows a very accurate instantaneous flow rate value to be obtained. The response time for flow measurements can be set from 60 seconds up to 0.01 seconds. PRODUCT FEATURES Detection type ...
Riels Instruments
The RIV150 vane flow switch is suitable for heating or air conditioning systems and refrigeration systems. It is used to control the flow of non-corrosive liquids. The stainless steel ...
Riels Instruments
... fixed Weight: ZV1-6: 0,20 Kg / ZV7-8: 0,80 Kg / ZV9-10: 0,94 Kg Mechanical life: 106 cycles at 20°C Body: nickel-plated brass, optional in stainless steel and plastic Installation: It's suggest vertical position ...
Mechanical flow switch, for fluid or gaseous media, with spring-supported piston and magnetic triggering of a reed switch. Robust construction in brass ...
VAL.CO srl
Flow meter with floating piston technology for very low flow rates. The pressure difference created by the by-pass hole of the piston determines the working field. The new calibration system, with ...
VAL.CO srl
GENERAL CHARACTERISTICS The flow switch FCM was built to enable a simple control of the flow rate and a fast signal in the absence of flow. The electrical part is ...
VAL.CO srl
The brass insertion flow switch is designed for the detection of fluid movements in a system. It is ideal to work with Non-Flameproof and/or Zone 1 & 2 areas (ATEX approved). This ...
... medium: 100°C max. (others on request) Ambient temperature: 70°C max. Switch: Can be used normally closed or normally open contact, SPDT switch is available on request Switch hysteresis: ...
For industrial hazardous environment applications requiring a NEMA 7 (Class I, Division I, Group C and D) or NEMA 9 (Class II, Division I, Group E, F, and G) rated flow switch for medium ...
Bell & Gossett Domestic Pump
... economical flow switch is desired Paddle fits 8″ (203mm) minimum duct size Two electrical knock-outs allow connection from either end Brass, steel and aluminum construction Single ...
Bell & Gossett Domestic Pump
... size Two electrical knock-outs allow connection from either end Brass, steel and aluminum construction Single pole, double throw snap switch Sensitivity adjusting screw makes flow ...
Bell & Gossett Domestic Pump
Flow switch for liquids and gases. Easy installation and available for all flow directions. Without contact between the fluid and the reed detection systems, indicators ...
... 10798 Series Flow Switches are externally adjustable switches that are ideal for protecting machine tools from coolant flow failure, for protecting bearings from loss ...
IF…VE – Adjustable visual and electric flow switches Flow rate0,1…60 LPM H2O Materials Anodized aluminium – Nickel-plated brass – 304 stainless steel Tube: Pirex ...
ELETTROTEC s.r.l.
... causes a permanent magnet attached on the other end of the arm to switch an adjustable reed contact located outside the liquid being monitored. By moving the reed contact, different ...
PKP PROZESSMESSTECHNIK GMBH
... our help page on flow switch adjust-ability for how this works. Operation: Liquid flows through the housing, with flows below the “set point” the liquid flows ...
Thomas Products LTD
Description The FL series has designed to intercept the flow presence by magnetic system contact reed.Magnetic components separated from the electric parts, the last one is possible to replace without removing the component ...
GTE Elettromeccanica Srl
Flow Switch Process Control Devices offer various types of flow switches. Designed to control the flow of Liquid. This unit as named utilizes the force of liquid flow ...
In HVAC plants to monitor the flow of fluids in hydraulic systems, especially in refrigeration, heat pump and heating plants, e.g. for use with condensers, boilers, heat exchangers, etc. Mechanical design The unit comprises ...
... body – made of plastic – block shaped Bidirectional flow regulators, pressure control valve, pneumatic switch, slide valve ipso 032, 033 Quick exhaust valve VSR Materials Body, brass, ...
IFW is a mechanical switch for the detection and confirmation of liquid flow. The flow body houses a diaphragm responsive to flow rate. A connected rod and lever mechanism ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining